V-band high-gain slot antenna using single layer partially reflective surface

Hussein Attia*

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

1 Scopus citations

Abstract

In this paper, a novel design of a high-gain and wideband slot antenna operating at V-band is presented. The gain and bandwidth enhancements are achieved by feeding a simple radiating slot with a ridge-gap waveguide and placing a single layer superstrate above the antenna. The superstrate acting as a partially reflective surface is based on complementary frequency selective surface which provides positive phase gradient over the frequency range 47 to 65 GHz. Numerical simulations of the proposed design demonstrate a gain enhancement of 8.3 dB at 63 GHz when compared with the antenna without the superstrate, and 3-dB gain bandwidth of about 5 GHz. Moreover, the antenna is matched to the feeding ridge-gap waveguide over the frequency range of 56.0 to 66.7 GHz.

Original languageEnglish
Title of host publicationIET Conference Publications
PublisherInstitution of Engineering and Technology
EditionCP741
ISBN (Electronic)9781785618161, 9781785618437, 9781785618468, 9781785618871, 9781785619427, 9781785619694, 9781839530036
ISBN (Print)9781785617911
DOIs
StatePublished - 2018

Publication series

NameIET Conference Publications
NumberCP741
Volume2018

Bibliographical note

Publisher Copyright:
© Institution of Engineering and Technology.All Rights Reserved.

Keywords

  • High-gain
  • Ridge-gap waveguide
  • V-band

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'V-band high-gain slot antenna using single layer partially reflective surface'. Together they form a unique fingerprint.

Cite this