Utilizing Parallel Superconducting Element as a Novel Approach of Flux-Coupled Type SFCL to Limit DC Current in the System

To lessen the amount of energy lost during transmission, electricity is increasingly being sent using high-voltage lines. Transmission loss in a DC system is lower than in an AC system over long distances. The DC system can improve the efficiency of long-distance transmission by connecting power grids with different requirements. The DC method is becoming popular since it helps to keep the grid stable. Managing and blocking DC flow is crucial to system functionality. In this study, we explore the operation of a flux-coupled type superconducting fault current limiter (SFCL) in a DC system, where the two windings are connected in parallel to limit the fault current flow. A flux-coupled type SFCL is built by connecting two coils in parallel and a superconducting element (SE) in series with the secondary coil. The functions of an SFCL of the flux-coupled kind are equivalent in both direct and alternating current systems. Because of the opposing magnetic fluxes produced by the two coils, the voltage generated by the parallel connection of the coils is always zero. Inadequate SE leads to an increase in resistance, inhibiting the cancellation of opposing magnetic fluxes and hence a loss in power. Connecting the two coils in series allows voltage to be generated while the fault current is limited. To further validate the performance of SFCL with varying resistance and inductance, the system is additionally tested on the IEEE 39 bus system. The MATLAB/SIMULINK software suite is used to run the test system.