The Design of Wireless Portable Electrocardiograph Monitoring System Based on ZigBee

Saleemullah Memon; Kamlesh Kumar Soothar; Kamran Ali Memon; Arif Hussain Magsi; Asif Ali Laghari; Muhammad Abbas; Noor ul Ain

doi:10.4108/eai.13-7-2018.164558

The Design of Wireless Portable Electrocardiograph Monitoring System Based on ZigBee

Saleemullah Memon, Kamlesh Kumar Soothar, Kamran Ali Memon^*, Arif Hussain Magsi, Asif Ali Laghari, Muhammad Abbas, Noor ul Ain

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes setup very inconvenient, costly, and difficult to manage patients. It is crucial to develop and design a clinical diagnostic system that takes bio-signal from the body of the patient and transmits wirelessly to the physicians/hospital. In this paper, we have designed a novel portable system for ECG signal acquisition, processing, and wireless transmission using a ZigBee module. Our portable design enhances mobility, small in size, and very cheap for long term monitoring of cardiac patients. The results show that the ECG wave successfully transmitted to the physician, and heartbeat values are visible to the patient. Furthermore, the results of the ECG wave are unclear when the position of electrodes is dislocated.

Original language	English
Pages (from-to)	1-8
Number of pages	8
Journal	EAI Endorsed Transactions on Scalable Information Systems
Volume	7
Issue number	28
DOIs	https://doi.org/10.4108/eai.13-7-2018.164558
State	Published - 2020
Externally published	Yes

Bibliographical note

Publisher Copyright:
© 2020 Saleemullah Memon et al., licensed to EAI. This is an open access article distributed under the terms of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/3.0/), which permits unlimited use, distribution, and reproduction in any medium so long as the original work is properly cited.

Keywords

AD8232
Arduino UNO R3
ECG monitoring system,,,
ZigBee

ASJC Scopus subject areas

Software
Information Systems
Hardware and Architecture
Computer Science Applications
Computer Networks and Communications
Information Systems and Management

Access to Document

10.4108/eai.13-7-2018.164558

Cite this

@article{e5c739d903504c579680563a21d2224e,

title = "The Design of Wireless Portable Electrocardiograph Monitoring System Based on ZigBee",

abstract = "The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes setup very inconvenient, costly, and difficult to manage patients. It is crucial to develop and design a clinical diagnostic system that takes bio-signal from the body of the patient and transmits wirelessly to the physicians/hospital. In this paper, we have designed a novel portable system for ECG signal acquisition, processing, and wireless transmission using a ZigBee module. Our portable design enhances mobility, small in size, and very cheap for long term monitoring of cardiac patients. The results show that the ECG wave successfully transmitted to the physician, and heartbeat values are visible to the patient. Furthermore, the results of the ECG wave are unclear when the position of electrodes is dislocated.",

keywords = "AD8232, Arduino UNO R3, ECG monitoring system,,,, ZigBee",

author = "Saleemullah Memon and Soothar, \{Kamlesh Kumar\} and Memon, \{Kamran Ali\} and Magsi, \{Arif Hussain\} and Laghari, \{Asif Ali\} and Muhammad Abbas and Ain, \{Noor ul\}",

note = "Publisher Copyright: {\textcopyright} 2020 Saleemullah Memon et al., licensed to EAI. This is an open access article distributed under the terms of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/3.0/), which permits unlimited use, distribution, and reproduction in any medium so long as the original work is properly cited.",

year = "2020",

doi = "10.4108/eai.13-7-2018.164558",

language = "English",

volume = "7",

pages = "1--8",

journal = "EAI Endorsed Transactions on Scalable Information Systems",

issn = "2032-9407",

publisher = "European Alliance for Innovation",

number = "28",

}

TY - JOUR

T1 - The Design of Wireless Portable Electrocardiograph Monitoring System Based on ZigBee

AU - Memon, Saleemullah

AU - Soothar, Kamlesh Kumar

AU - Memon, Kamran Ali

AU - Magsi, Arif Hussain

AU - Laghari, Asif Ali

AU - Abbas, Muhammad

AU - Ain, Noor ul

N1 - Publisher Copyright: © 2020 Saleemullah Memon et al., licensed to EAI. This is an open access article distributed under the terms of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/3.0/), which permits unlimited use, distribution, and reproduction in any medium so long as the original work is properly cited.

PY - 2020

Y1 - 2020

N2 - The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes setup very inconvenient, costly, and difficult to manage patients. It is crucial to develop and design a clinical diagnostic system that takes bio-signal from the body of the patient and transmits wirelessly to the physicians/hospital. In this paper, we have designed a novel portable system for ECG signal acquisition, processing, and wireless transmission using a ZigBee module. Our portable design enhances mobility, small in size, and very cheap for long term monitoring of cardiac patients. The results show that the ECG wave successfully transmitted to the physician, and heartbeat values are visible to the patient. Furthermore, the results of the ECG wave are unclear when the position of electrodes is dislocated.

AB - The emerging trend in wireless hospitals requires the development of bio-signal acquisition devices to be easily integrated into a single clinical routine. The wired devices used in hospitals and clinics, which makes setup very inconvenient, costly, and difficult to manage patients. It is crucial to develop and design a clinical diagnostic system that takes bio-signal from the body of the patient and transmits wirelessly to the physicians/hospital. In this paper, we have designed a novel portable system for ECG signal acquisition, processing, and wireless transmission using a ZigBee module. Our portable design enhances mobility, small in size, and very cheap for long term monitoring of cardiac patients. The results show that the ECG wave successfully transmitted to the physician, and heartbeat values are visible to the patient. Furthermore, the results of the ECG wave are unclear when the position of electrodes is dislocated.

KW - AD8232

KW - Arduino UNO R3

KW - ECG monitoring system,,,

KW - ZigBee

UR - https://www.scopus.com/pages/publications/85107545399

U2 - 10.4108/eai.13-7-2018.164558

DO - 10.4108/eai.13-7-2018.164558

M3 - Article

AN - SCOPUS:85107545399

SN - 2032-9407

VL - 7

SP - 1

EP - 8

JO - EAI Endorsed Transactions on Scalable Information Systems

JF - EAI Endorsed Transactions on Scalable Information Systems

IS - 28

ER -

The Design of Wireless Portable Electrocardiograph Monitoring System Based on ZigBee

Abstract

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this