Abstract
In this study, a high power fibre laser was used to synthesize titanium hydroxyapatite composite coating over biomedical-grade Nitinol surface through laser in-situ formation, cladding and alloying processes. The laser fluence is varied in the range of 2 kJ/cm2 to 8 kJ/cm2 in view of establishing a relationship between various in-situ phase-formation characteristics along with the rate of diffusion of the base material in the cladding zone with molten pool temperature. The alloying with base Nitinol material and subsequent diffusion of titanium to the in-situ formed calcium phosphate cladding layer are observed in the samples treated with laser fluence of 4 kJ/cm2 or above. Double layer configuration of the solidified molten pool is mostly found in all the cladding samples. At the fluence of 6 kJ/cm2 or above, the top layer primarily comprises segregated titanium-hydroxyapatite phase along with diffusion of titanium from the base material. Whereas, the bottom part of the molten pool is dominated with titanium-rich nickel–titanium intermetallic reinforced with nano particles. The steady-state variations of calcium and elemental presence of titanium through the cladding cross-section along with no nickel or oxide presence are confirmed through EDS line scans. The spherical and lamellar structures of formation of titanium-hydroxyapatite on the top surface also help to improve the overall corrosion resistance properties as compared to the bare surface. The modulus of elasticity is controlled by the variation of the top layer and intermediate layer composition and thickness, which varies with laser fluence. It falls in the range of 6–30 GPa which is similar to natural bone. Thus this nickel-free alloying and cladding layer of titanium-hydroxyapatite can serve as one of the potential candidates for use as a coating over the load bearing Nitinol implants to arrest the nickel release phenomena.
| Original language | English |
|---|---|
| Pages (from-to) | 539-550 |
| Number of pages | 12 |
| Journal | Surface and Coatings Technology |
| Volume | 358 |
| DOIs | |
| State | Published - 25 Jan 2019 |
| Externally published | Yes |
Bibliographical note
Publisher Copyright:© 2018 Elsevier B.V.
Keywords
- Biocompatible functional coating
- Hydroxyapatite
- Laser cladding and alloying
- Nitinol surface modification
- Titanium–calcium coating
ASJC Scopus subject areas
- General Chemistry
- Condensed Matter Physics
- Surfaces and Interfaces
- Surfaces, Coatings and Films
- Materials Chemistry