Surface modification of reverse osmosis membranes with zwitterionic coating for improved resistance to fouling

Copolymer films of poly(4-vinylpyridine-co-ethylene glycol diacrylate) (p(4-VP-co-EGDA)) were synthesized and first deposited on various substrates via initiated chemical vapor deposition (iCVD). As-deposited copolymer films were converted to surface zwitterionic structures containing poly(carboxybetaine acrylic acetate) (pCBAA) units by a quaternization reaction with 3-bromopropionic acid (3-BPA). Conversion to a zwitterionic structure was confirmed by FTIR and high-resolution XPS N1s scans. Biopolymer adsorption of the deposited copolymer coatings was investigated by quartz crystal microbalance with dissipation (QCM-D) using a model foulant-bovin serum albumin (BSA). The optimized copolymer films were then deposited onto commercial RO membranes and with subsequent zwitterionicalization. Inertness to bacterial adhesion of the modified membranes was investigated by counting the number of Escherichia coli and Pseudomonas aeruginosa cells attached on the membrane surface under static conditions. Bacterial adhesion studies revealed an almost 98% reduction in micro-organism attachment onto the surface of modified membranes compared to bare membranes, which clearly demonstrates the effectiveness and superior performance of the zwitterionic coating against bacterial adhesion. The salt rejection performance of the modified membranes resulted in improved salt rejection (98%); however, permeate flux was slightly compromised compared to virgin membranes. AFM analysis demonstrated that modified membranes showed lower RMS roughness compared to virgin membranes.