Some design aspects of the assisted solar drying system with double-pass finned solar collectors

Supranto; Mohammad Hafidz Ruslan; Muhamad Yahya; Mohd Yusof Sulaiman; Mohamad Al Ghoul; Azami Zaharim; K. Sopian

Some design aspects of the assisted solar drying system with double-pass finned solar collectors

Supranto^*
, Mohammad Hafidz Ruslan
, Muhamad Yahya
, Mohd Yusof Sulaiman
, Mohamad Al Ghoul
, Azami Zaharim
, K. Sopian

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

The drying of material means removal of the moisture from the interior of the material to the surface and then followed by the removal of the moisture from the surface of the drying material. Open air sun-drying require large space and depend on the weather, so much of post harvest looses and quality degradation. Using solar drying system may reduce the lost. The system consists of solar air heating collector array, blower, auxiliary heater, and drying chamber. The solar air heating collector with high efficiency is needed for this system. The double-pass finned collector is used, its array in series. The collector size is 120 cm in width and 480 cm in length. The outlet temperature from collector is about of 85°C on solar radiation of about 650 W/m2 and air flow rate of about 0.08 kg/s. This solar drying system may dry 100 kg wet oil palm front from 70% to 15% moisture content in 8 hours.

Original language	English
Title of host publication	Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09
Pages	326-330
Number of pages	5
State	Published - 2009
Externally published	Yes

Publication series

Name	Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Double-pass finned collector
Drying time
Oil palm front drying

ASJC Scopus subject areas

Energy Engineering and Power Technology
Renewable Energy, Sustainability and the Environment
Management, Monitoring, Policy and Law
Waste Management and Disposal

Cite this

Supranto, Ruslan, M. H., Yahya, M., Sulaiman, M. Y., Al Ghoul, M., Zaharim, A., & Sopian, K. (2009). Some design aspects of the assisted solar drying system with double-pass finned solar collectors. In Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09 (pp. 326-330). (Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09).

Supranto ; Ruslan, Mohammad Hafidz ; Yahya, Muhamad et al. / Some design aspects of the assisted solar drying system with double-pass finned solar collectors. Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. pp. 326-330 (Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09).

@inproceedings{237454f5735b476e9d388ddc18149fed,

title = "Some design aspects of the assisted solar drying system with double-pass finned solar collectors",

abstract = "The drying of material means removal of the moisture from the interior of the material to the surface and then followed by the removal of the moisture from the surface of the drying material. Open air sun-drying require large space and depend on the weather, so much of post harvest looses and quality degradation. Using solar drying system may reduce the lost. The system consists of solar air heating collector array, blower, auxiliary heater, and drying chamber. The solar air heating collector with high efficiency is needed for this system. The double-pass finned collector is used, its array in series. The collector size is 120 cm in width and 480 cm in length. The outlet temperature from collector is about of 85°C on solar radiation of about 650 W/m2 and air flow rate of about 0.08 kg/s. This solar drying system may dry 100 kg wet oil palm front from 70\% to 15\% moisture content in 8 hours.",

keywords = "Double-pass finned collector, Drying time, Oil palm front drying",

author = "Supranto and Ruslan, \{Mohammad Hafidz\} and Muhamad Yahya and Sulaiman, \{Mohd Yusof\} and \{Al Ghoul\}, Mohamad and Azami Zaharim and K. Sopian",

year = "2009",

language = "English",

isbn = "9789604740932",

series = "Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09",

pages = "326--330",

booktitle = "Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09",

}

Supranto, Ruslan, MH, Yahya, M, Sulaiman, MY, Al Ghoul, M, Zaharim, A & Sopian, K 2009, Some design aspects of the assisted solar drying system with double-pass finned solar collectors. in Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09, pp. 326-330.

Some design aspects of the assisted solar drying system with double-pass finned solar collectors. / Supranto; Ruslan, Mohammad Hafidz; Yahya, Muhamad et al.
Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. p. 326-330 (Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Some design aspects of the assisted solar drying system with double-pass finned solar collectors

AU - Supranto,

AU - Ruslan, Mohammad Hafidz

AU - Yahya, Muhamad

AU - Sulaiman, Mohd Yusof

AU - Al Ghoul, Mohamad

AU - Zaharim, Azami

AU - Sopian, K.

PY - 2009

Y1 - 2009

N2 - The drying of material means removal of the moisture from the interior of the material to the surface and then followed by the removal of the moisture from the surface of the drying material. Open air sun-drying require large space and depend on the weather, so much of post harvest looses and quality degradation. Using solar drying system may reduce the lost. The system consists of solar air heating collector array, blower, auxiliary heater, and drying chamber. The solar air heating collector with high efficiency is needed for this system. The double-pass finned collector is used, its array in series. The collector size is 120 cm in width and 480 cm in length. The outlet temperature from collector is about of 85°C on solar radiation of about 650 W/m2 and air flow rate of about 0.08 kg/s. This solar drying system may dry 100 kg wet oil palm front from 70% to 15% moisture content in 8 hours.

AB - The drying of material means removal of the moisture from the interior of the material to the surface and then followed by the removal of the moisture from the surface of the drying material. Open air sun-drying require large space and depend on the weather, so much of post harvest looses and quality degradation. Using solar drying system may reduce the lost. The system consists of solar air heating collector array, blower, auxiliary heater, and drying chamber. The solar air heating collector with high efficiency is needed for this system. The double-pass finned collector is used, its array in series. The collector size is 120 cm in width and 480 cm in length. The outlet temperature from collector is about of 85°C on solar radiation of about 650 W/m2 and air flow rate of about 0.08 kg/s. This solar drying system may dry 100 kg wet oil palm front from 70% to 15% moisture content in 8 hours.

KW - Double-pass finned collector

KW - Drying time

KW - Oil palm front drying

UR - https://www.scopus.com/pages/publications/78149319918

M3 - Conference contribution

AN - SCOPUS:78149319918

SN - 9789604740932

T3 - Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09

SP - 326

EP - 330

BT - Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09

ER -

Supranto, Ruslan MH, Yahya M, Sulaiman MY, Al Ghoul M, Zaharim A et al. Some design aspects of the assisted solar drying system with double-pass finned solar collectors. In Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. p. 326-330. (Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09).

Some design aspects of the assisted solar drying system with double-pass finned solar collectors

Abstract

Publication series

UN SDGs

Keywords

ASJC Scopus subject areas

Fingerprint

Cite this