Skip to main navigation Skip to search Skip to main content

Sodium alginate-based nanofiber for wastewater treatment

  • Qamar Wali
  • , Awais Ahmad
  • , Rafael Luque
  • , Muhammad Awais Ahmad

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

Abstract

Heavy metal presence in the environment has become one of the most critical environmental issue these days. Various approaches have been used for the separation of heavy toxic metals from wastewater. Sodium alginate (SA) adsorbents are inexpensive, biodegradable, and environmentally friendly materials considered as a cost effective materials for surface adsorption technique. There are many reports available on SA nanomaterials in the literature and its uses as adsorbent as a treatment for unsafe wastewater. However, very few reports exist for SA nanofibers as an adsorbent. This chapter describes application of SA-based nanofiber developed by electrospinning for the wastewater treatment. Cadmium metal adsorption rate was obtained around 67.05mg/g under optimal experimental conditions. It was established from the thermodynamic details that the cadmium adsorption process was spontaneous as well as endothermic in nature. Similarly, alginate electrospun membranes exhibited maximum monolayer sorption capacity of 15.6mg/g at pH 4. Similarly, other studies employing alginate nanofibers as an adsorbent showed that removal of heavy metals from the solution followed this trend: Cu>Ni>Cd>Co. The alginate nanofibers spun via electrospinning were shown to be a suitable material for the potential application of heavy metal ion removal from wastewater.

Original languageEnglish
Title of host publicationSodium Alginate-Based Nanomaterials for Wastewater Treatment
PublisherElsevier
Pages307-314
Number of pages8
ISBN (Electronic)9780128235515
ISBN (Print)9780128236208
DOIs
StatePublished - 1 Jan 2022
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2023 Elsevier Inc. All rights reserved.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 6 - Clean Water and Sanitation
    SDG 6 Clean Water and Sanitation

Keywords

  • Pollution
  • clean water
  • sustainable environment
  • sustainable goals

ASJC Scopus subject areas

  • General Engineering
  • General Materials Science

Fingerprint

Dive into the research topics of 'Sodium alginate-based nanofiber for wastewater treatment'. Together they form a unique fingerprint.

Cite this