Skip to main navigation Skip to search Skip to main content

Simultaneous sensing of the strain and points of failure in composite beams with an embedded fiber optic Michelson sensor

  • I. B. Kwon
  • , C. G. Kim
  • , C. S. Hong*
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

38 Scopus citations

Abstract

A fiber optic Michelson sensor was embedded in composite beams to sense the internal strain and points of failure of the composite structures. The bending deformation and matrix cracking were investigated by four-point bending tests of cross-ply composite beams with the embedded fiber optic sensor. The failure points of composite beams were detected by using both a PZT sensor and a fiber optic sensor in order to investigate the fiber optic failure signals. The failure due to matrix cracks in a composite beam was confirmed by the edge replica method. The digital processing of the fiber optic signal was carried out to determine the strains and failure points of composite beams. The failure points were observed from the processed failure signal by high-pass filtering. The initial failure strain of the composite beam was measured and processed from the fiber optic strain signal after low-pass filtering.

Original languageEnglish
Pages (from-to)1639-1651
Number of pages13
JournalComposites Science and Technology
Volume57
Issue number12
DOIs
StatePublished - 16 Jan 1998
Externally publishedYes

Keywords

  • Digital processing
  • Failure points
  • Fiber optic Michelson sensor
  • Internal strain
  • Simultaneous sensing

ASJC Scopus subject areas

  • Ceramics and Composites
  • General Engineering

Fingerprint

Dive into the research topics of 'Simultaneous sensing of the strain and points of failure in composite beams with an embedded fiber optic Michelson sensor'. Together they form a unique fingerprint.

Cite this