Simulation and hardware implementation of PMSM driven solar water pumping system

Shadab Murshid; Bhim Singh

doi:10.1109/PICC.2018.8384754

Simulation and hardware implementation of PMSM driven solar water pumping system

Shadab Murshid
, Bhim Singh

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

12 Scopus citations

Abstract

This work proposes a permanent magnet synchronous motor (PMSM) driven standalone solar water pumping system. The proposed topology utilizes a solar photovoltaic (SPV) array that converts the solar energy into electrical energy. The energy obtained is used to drive the PMSM using a 3-phase voltage source inverter. The speed of PMSM is controlled in vector control using a hybrid proportional integral controller. The PMSM is coupled to a pump, which performs the pumping operation. An intermediate stage DC - DC converter is utilized for maximum power point tracking using an incremental conductance algorithm. A SPV feed forward term is introduced to accelerate the response of the system. The proposed topology is modelled and its performance is manifested through simulation studies using MATLAB/Simulink under different environmental conditions. A hardware validation of the proposed system is also carried out using a digital signal processor controller (DS-1004) on a develop prototype in the laboratory.

Original language	English
Title of host publication	Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1-6
Number of pages	6
ISBN (Electronic)	9781538624623
DOIs	https://doi.org/10.1109/PICC.2018.8384754
State	Published - 13 Jun 2018
Externally published	Yes
Event	2nd IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 - Thrissur, India Duration: 18 Jan 2018 → 20 Jan 2018

Publication series

Name	Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018

Conference

Conference	2nd IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018
Country/Territory	India
City	Thrissur
Period	18/01/18 → 20/01/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Boost Converter
Boost Coverter
Maximum Power Point Tracking
Permanent Magnet Synchronous Motor
Solar Water Pumping
Voltage Source Inverter

ASJC Scopus subject areas

Renewable Energy, Sustainability and the Environment
Electrical and Electronic Engineering
Control and Optimization
Instrumentation
Energy Engineering and Power Technology

Access to Document

10.1109/PICC.2018.8384754

Cite this

Murshid, S., & Singh, B. (2018). Simulation and hardware implementation of PMSM driven solar water pumping system. In Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 (pp. 1-6). (Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PICC.2018.8384754

Murshid, Shadab ; Singh, Bhim. / Simulation and hardware implementation of PMSM driven solar water pumping system. Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 1-6 (Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018).

@inproceedings{a8d38d2b6044479e9d93eff2682d1c0f,

title = "Simulation and hardware implementation of PMSM driven solar water pumping system",

abstract = "This work proposes a permanent magnet synchronous motor (PMSM) driven standalone solar water pumping system. The proposed topology utilizes a solar photovoltaic (SPV) array that converts the solar energy into electrical energy. The energy obtained is used to drive the PMSM using a 3-phase voltage source inverter. The speed of PMSM is controlled in vector control using a hybrid proportional integral controller. The PMSM is coupled to a pump, which performs the pumping operation. An intermediate stage DC - DC converter is utilized for maximum power point tracking using an incremental conductance algorithm. A SPV feed forward term is introduced to accelerate the response of the system. The proposed topology is modelled and its performance is manifested through simulation studies using MATLAB/Simulink under different environmental conditions. A hardware validation of the proposed system is also carried out using a digital signal processor controller (DS-1004) on a develop prototype in the laboratory.",

keywords = "Boost Converter, Boost Coverter, Maximum Power Point Tracking, Permanent Magnet Synchronous Motor, Solar Water Pumping, Voltage Source Inverter",

author = "Shadab Murshid and Bhim Singh",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2nd IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 ; Conference date: 18-01-2018 Through 20-01-2018",

year = "2018",

month = jun,

day = "13",

doi = "10.1109/PICC.2018.8384754",

language = "English",

series = "Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1--6",

booktitle = "Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018",

address = "United States",

}

Murshid, S & Singh, B 2018, Simulation and hardware implementation of PMSM driven solar water pumping system. in Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018. Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018, Institute of Electrical and Electronics Engineers Inc., pp. 1-6, 2nd IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018, Thrissur, India, 18/01/18. https://doi.org/10.1109/PICC.2018.8384754

Simulation and hardware implementation of PMSM driven solar water pumping system. / Murshid, Shadab; Singh, Bhim.
Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-6 (Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Simulation and hardware implementation of PMSM driven solar water pumping system

AU - Murshid, Shadab

AU - Singh, Bhim

PY - 2018/6/13

Y1 - 2018/6/13

N2 - This work proposes a permanent magnet synchronous motor (PMSM) driven standalone solar water pumping system. The proposed topology utilizes a solar photovoltaic (SPV) array that converts the solar energy into electrical energy. The energy obtained is used to drive the PMSM using a 3-phase voltage source inverter. The speed of PMSM is controlled in vector control using a hybrid proportional integral controller. The PMSM is coupled to a pump, which performs the pumping operation. An intermediate stage DC - DC converter is utilized for maximum power point tracking using an incremental conductance algorithm. A SPV feed forward term is introduced to accelerate the response of the system. The proposed topology is modelled and its performance is manifested through simulation studies using MATLAB/Simulink under different environmental conditions. A hardware validation of the proposed system is also carried out using a digital signal processor controller (DS-1004) on a develop prototype in the laboratory.

AB - This work proposes a permanent magnet synchronous motor (PMSM) driven standalone solar water pumping system. The proposed topology utilizes a solar photovoltaic (SPV) array that converts the solar energy into electrical energy. The energy obtained is used to drive the PMSM using a 3-phase voltage source inverter. The speed of PMSM is controlled in vector control using a hybrid proportional integral controller. The PMSM is coupled to a pump, which performs the pumping operation. An intermediate stage DC - DC converter is utilized for maximum power point tracking using an incremental conductance algorithm. A SPV feed forward term is introduced to accelerate the response of the system. The proposed topology is modelled and its performance is manifested through simulation studies using MATLAB/Simulink under different environmental conditions. A hardware validation of the proposed system is also carried out using a digital signal processor controller (DS-1004) on a develop prototype in the laboratory.

KW - Boost Converter

KW - Boost Coverter

KW - Maximum Power Point Tracking

KW - Permanent Magnet Synchronous Motor

KW - Solar Water Pumping

KW - Voltage Source Inverter

UR - https://www.scopus.com/pages/publications/85050158884

U2 - 10.1109/PICC.2018.8384754

DO - 10.1109/PICC.2018.8384754

M3 - Conference contribution

AN - SCOPUS:85050158884

T3 - Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018

SP - 1

EP - 6

BT - Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2nd IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018

Y2 - 18 January 2018 through 20 January 2018

ER -

Murshid S, Singh B. Simulation and hardware implementation of PMSM driven solar water pumping system. In Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 1-6. (Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018). doi: 10.1109/PICC.2018.8384754

Simulation and hardware implementation of PMSM driven solar water pumping system

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this