Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid

Ihtisham Ul Haq; Muhammad Iftikhar Khan; Kamran Zeb

doi:10.1109/ICECUBE.2016.7495238

Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid

Ihtisham Ul Haq
, Muhammad Iftikhar Khan
, Kamran Zeb

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Abstract

This paper presents a non-linear Sliding Mode Control (SMC) strategy based on continuous switching law for large-power (10MW) Permanent Magnet Synchronous Generator (PMSG) based Wind-Energy Conversion System (WECS). The WECS model consists of a wind turbine, PMSG, rectifier fed boost converter, PWM inverter and the filter. The controller is used to maintain the DC-link voltage constant and to generate controlled active and reactive power for grid. For verification of validity of proposed control scheme and model, the proposed system's dynamic model is simulated in MATLAB/Simulink. SMC has the promising features of: fast switching, insensitivity to parameter uncertainty, disturbance rejection quality, and more robustness than the conventional linear controllers. The proposed continuous control compelled the states trajectories of the system onto the surface in error space (sliding surface) for the system behavior to obtain design specifications. Simulation results demonstrate that the proposed SMC is effective and gives superior performance than conventionally tuned PI controller.

Original language	English
Title of host publication	2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	277-282
Number of pages	6
ISBN (Electronic)	9781509012527
DOIs	https://doi.org/10.1109/ICECUBE.2016.7495238
State	Published - 20 Jun 2016
Externally published	Yes
Event	1st International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Quetta, Pakistan Duration: 11 Apr 2016 → 12 Apr 2016

Publication series

Name	2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings

Conference

Conference	1st International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016
Country/Territory	Pakistan
City	Quetta
Period	11/04/16 → 12/04/16

Bibliographical note

Publisher Copyright:
© 2016 IEEE.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

PI
PWM converters
Permanent Magnet Synchronous Generator
Sliding Mode Control
Wind-Energy Conversion System

ASJC Scopus subject areas

Computer Networks and Communications
Computer Science Applications
Electrical and Electronic Engineering
Instrumentation

Access to Document

10.1109/ICECUBE.2016.7495238

Cite this

Haq, I. U., Khan, M. I., & Zeb, K. (2016). Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid. In 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings (pp. 277-282). Article 7495238 (2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICECUBE.2016.7495238

Haq, Ihtisham Ul ; Khan, Muhammad Iftikhar ; Zeb, Kamran. / Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid. 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 277-282 (2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings).

@inproceedings{79569360751e4900ad279904cf70d2fc,

title = "Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid",

abstract = "This paper presents a non-linear Sliding Mode Control (SMC) strategy based on continuous switching law for large-power (10MW) Permanent Magnet Synchronous Generator (PMSG) based Wind-Energy Conversion System (WECS). The WECS model consists of a wind turbine, PMSG, rectifier fed boost converter, PWM inverter and the filter. The controller is used to maintain the DC-link voltage constant and to generate controlled active and reactive power for grid. For verification of validity of proposed control scheme and model, the proposed system's dynamic model is simulated in MATLAB/Simulink. SMC has the promising features of: fast switching, insensitivity to parameter uncertainty, disturbance rejection quality, and more robustness than the conventional linear controllers. The proposed continuous control compelled the states trajectories of the system onto the surface in error space (sliding surface) for the system behavior to obtain design specifications. Simulation results demonstrate that the proposed SMC is effective and gives superior performance than conventionally tuned PI controller.",

keywords = "PI, PWM converters, Permanent Magnet Synchronous Generator, Sliding Mode Control, Wind-Energy Conversion System",

author = "Haq, \{Ihtisham Ul\} and Khan, \{Muhammad Iftikhar\} and Kamran Zeb",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 1st International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 ; Conference date: 11-04-2016 Through 12-04-2016",

year = "2016",

month = jun,

day = "20",

doi = "10.1109/ICECUBE.2016.7495238",

language = "English",

series = "2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "277--282",

booktitle = "2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings",

address = "United States",

}

Haq, IU, Khan, MI & Zeb, K 2016, Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid. in 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings., 7495238, 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 277-282, 1st International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016, Quetta, Pakistan, 11/04/16. https://doi.org/10.1109/ICECUBE.2016.7495238

Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid. / Haq, Ihtisham Ul; Khan, Muhammad Iftikhar; Zeb, Kamran.
2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. p. 277-282 7495238 (2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid

AU - Haq, Ihtisham Ul

AU - Khan, Muhammad Iftikhar

AU - Zeb, Kamran

PY - 2016/6/20

Y1 - 2016/6/20

N2 - This paper presents a non-linear Sliding Mode Control (SMC) strategy based on continuous switching law for large-power (10MW) Permanent Magnet Synchronous Generator (PMSG) based Wind-Energy Conversion System (WECS). The WECS model consists of a wind turbine, PMSG, rectifier fed boost converter, PWM inverter and the filter. The controller is used to maintain the DC-link voltage constant and to generate controlled active and reactive power for grid. For verification of validity of proposed control scheme and model, the proposed system's dynamic model is simulated in MATLAB/Simulink. SMC has the promising features of: fast switching, insensitivity to parameter uncertainty, disturbance rejection quality, and more robustness than the conventional linear controllers. The proposed continuous control compelled the states trajectories of the system onto the surface in error space (sliding surface) for the system behavior to obtain design specifications. Simulation results demonstrate that the proposed SMC is effective and gives superior performance than conventionally tuned PI controller.

AB - This paper presents a non-linear Sliding Mode Control (SMC) strategy based on continuous switching law for large-power (10MW) Permanent Magnet Synchronous Generator (PMSG) based Wind-Energy Conversion System (WECS). The WECS model consists of a wind turbine, PMSG, rectifier fed boost converter, PWM inverter and the filter. The controller is used to maintain the DC-link voltage constant and to generate controlled active and reactive power for grid. For verification of validity of proposed control scheme and model, the proposed system's dynamic model is simulated in MATLAB/Simulink. SMC has the promising features of: fast switching, insensitivity to parameter uncertainty, disturbance rejection quality, and more robustness than the conventional linear controllers. The proposed continuous control compelled the states trajectories of the system onto the surface in error space (sliding surface) for the system behavior to obtain design specifications. Simulation results demonstrate that the proposed SMC is effective and gives superior performance than conventionally tuned PI controller.

KW - PI

KW - PWM converters

KW - Permanent Magnet Synchronous Generator

KW - Sliding Mode Control

KW - Wind-Energy Conversion System

UR - https://www.scopus.com/pages/publications/84979619101

U2 - 10.1109/ICECUBE.2016.7495238

DO - 10.1109/ICECUBE.2016.7495238

M3 - Conference contribution

AN - SCOPUS:84979619101

T3 - 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings

SP - 277

EP - 282

BT - 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1st International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016

Y2 - 11 April 2016 through 12 April 2016

ER -

Haq IU, Khan MI, Zeb K. Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid. In 2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2016. p. 277-282. 7495238. (2016 International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016 - Proceedings). doi: 10.1109/ICECUBE.2016.7495238

Siding Mode Control for PMSG based Wind Energy Conversion System connected to the grid

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this