Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9)

Mudassar Rehman; Wang Yanen; Ray Tahir Mushtaq; Kashif Ishfaq; Sadaf Zahoor; Ammar Ahmed; M. Saravana Kumar; Thierno Gueyee; Md Mazedur Rahman; Jakia Sultana

doi:10.1007/s40964-023-00405-y

Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9)

Mudassar Rehman^*, Wang Yanen^*, Ray Tahir Mushtaq, Kashif Ishfaq, Sadaf Zahoor, Ammar Ahmed, M. Saravana Kumar, Thierno Gueyee, Md Mazedur Rahman, Jakia Sultana

^*Corresponding author for this work

Research output: Contribution to journal › Comment/debate

Abstract

The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Funding The current study was funded by; The National Key Research and Development Program of China [Grant No. 2019QY(Y)0502]; The Key Research and Development Program of Shaanxi Province [Grant No. 2020ZDLSF04-07]; The National Natural Science Foundation of China [Grant No. 51905438]; The Fundamental Research Funds for the Central Universities [Grant No. 31020190502009]; The Innovation Platform of Bio fabrication [Grant No. 17SF0002]; and China postdoctoral Science Foundation [Grant No. 2020M673471]. The original article has been corrected.

Original language	English
Pages (from-to)	1711
Number of pages	1
Journal	Progress in Additive Manufacturing
Volume	8
Issue number	6
DOIs	https://doi.org/10.1007/s40964-023-00405-y
State	Published - Dec 2023
Externally published	Yes

Bibliographical note

Publisher Copyright:
© 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG.

ASJC Scopus subject areas

Industrial and Manufacturing Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1007/s40964-023-00405-y

Fingerprint

Dive into the research topics of 'Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9)'. Together they form a unique fingerprint.

Cite this

Rehman, M., Yanen, W., Mushtaq, R. T., Ishfaq, K., Zahoor, S., Ahmed, A., Kumar, M. S., Gueyee, T., Rahman, M. M., & Sultana, J. (2023). Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9). Progress in Additive Manufacturing, 8(6), 1711. https://doi.org/10.1007/s40964-023-00405-y

Rehman, Mudassar ; Yanen, Wang ; Mushtaq, Ray Tahir et al. / Publisher Correction : Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9). In: Progress in Additive Manufacturing. 2023 ; Vol. 8, No. 6. pp. 1711.

@article{6f6e0d04a8a84348b197fd018417d443,

title = "Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9)",

abstract = "The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Funding The current study was funded by; The National Key Research and Development Program of China [Grant No. 2019QY(Y)0502]; The Key Research and Development Program of Shaanxi Province [Grant No. 2020ZDLSF04-07]; The National Natural Science Foundation of China [Grant No. 51905438]; The Fundamental Research Funds for the Central Universities [Grant No. 31020190502009]; The Innovation Platform of Bio fabrication [Grant No. 17SF0002]; and China postdoctoral Science Foundation [Grant No. 2020M673471]. The original article has been corrected.",

author = "Mudassar Rehman and Wang Yanen and Mushtaq, \{Ray Tahir\} and Kashif Ishfaq and Sadaf Zahoor and Ammar Ahmed and Kumar, \{M. Saravana\} and Thierno Gueyee and Rahman, \{Md Mazedur\} and Jakia Sultana",

note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG.",

year = "2023",

month = dec,

doi = "10.1007/s40964-023-00405-y",

language = "English",

volume = "8",

pages = "1711",

journal = "Progress in Additive Manufacturing",

issn = "2363-9512",

publisher = "Springer Verlag",

number = "6",

}

Rehman, M, Yanen, W, Mushtaq, RT, Ishfaq, K, Zahoor, S, Ahmed, A, Kumar, MS, Gueyee, T, Rahman, MM & Sultana, J 2023, 'Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9)', Progress in Additive Manufacturing, vol. 8, no. 6, pp. 1711. https://doi.org/10.1007/s40964-023-00405-y

Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9). / Rehman, Mudassar; Yanen, Wang; Mushtaq, Ray Tahir et al.
In: Progress in Additive Manufacturing, Vol. 8, No. 6, 12.2023, p. 1711.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Publisher Correction

T2 - Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9)

AU - Rehman, Mudassar

AU - Yanen, Wang

AU - Mushtaq, Ray Tahir

AU - Ishfaq, Kashif

AU - Zahoor, Sadaf

AU - Ahmed, Ammar

AU - Kumar, M. Saravana

AU - Gueyee, Thierno

AU - Rahman, Md Mazedur

AU - Sultana, Jakia

PY - 2023/12

Y1 - 2023/12

N2 - The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Funding The current study was funded by; The National Key Research and Development Program of China [Grant No. 2019QY(Y)0502]; The Key Research and Development Program of Shaanxi Province [Grant No. 2020ZDLSF04-07]; The National Natural Science Foundation of China [Grant No. 51905438]; The Fundamental Research Funds for the Central Universities [Grant No. 31020190502009]; The Innovation Platform of Bio fabrication [Grant No. 17SF0002]; and China postdoctoral Science Foundation [Grant No. 2020M673471]. The original article has been corrected.

AB - The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Funding The current study was funded by; The National Key Research and Development Program of China [Grant No. 2019QY(Y)0502]; The Key Research and Development Program of Shaanxi Province [Grant No. 2020ZDLSF04-07]; The National Natural Science Foundation of China [Grant No. 51905438]; The Fundamental Research Funds for the Central Universities [Grant No. 31020190502009]; The Innovation Platform of Bio fabrication [Grant No. 17SF0002]; and China postdoctoral Science Foundation [Grant No. 2020M673471]. The original article has been corrected.

UR - https://www.scopus.com/pages/publications/85146552187

U2 - 10.1007/s40964-023-00405-y

DO - 10.1007/s40964-023-00405-y

M3 - Comment/debate

AN - SCOPUS:85146552187

SN - 2363-9512

VL - 8

SP - 1711

JO - Progress in Additive Manufacturing

JF - Progress in Additive Manufacturing

IS - 6

ER -

Rehman M, Yanen W, Mushtaq RT, Ishfaq K, Zahoor S, Ahmed A et al. Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic (Progress in Additive Manufacturing, (2023), 8, 5, (1007-1041), 10.1007/s40964-022-00373-9). Progress in Additive Manufacturing. 2023 Dec;8(6):1711. doi: 10.1007/s40964-023-00405-y