TY - GEN
T1 - Preformed particle gel extrusion through open conduits during conformance control treatments
AU - Imqam, Abdulmohsin
AU - Bai, Baojun
AU - Ramadan, Mustafa A.I.
AU - Wei, Mingzhen
AU - Delshad, Mojdeh
AU - Sepehrnoori, Kamy
PY - 2014
Y1 - 2014
N2 - Millimeter-sized (10 um∼mm) preformed particle gels (PPGs) have been used successfully as conformance control agents in more than 5,000 wells. They help to control both water and CO2 production through high-permeability streaks or conduits (large pore openings), which naturally exist or are aggravated either by mineral solutions or by a high injection pressure during the flooding process. This paper explores several factors that can have an important impact on the injectivity and plugging efficiency of PPGs in these conduits. Extensive experiments were conducted to examine the effect of the conduit's opening size and the PPG strength on the ratio of the particle size to the opening diameter, injectivity index, resistance factor, and plugging efficiency. Five-foot tubes with four internal diameters were designed to emulate the opening conduits. Three pressure taps were mounted along the tubes to monitor PPG transport and plugging performance. The results show that weak gel has less injection pressure at a large particle opening ratio compared to strong gel. PPG strength impacted injectivity more significantly than did particle opening ratio. Resistance factor increased as the brine concentration and conduit opening size increased. PPGs can significantly reduce the permeability of an open conduit and their plugging efficiency depends highly on the particle strength and the conduit's opening size. The particle size of PPG was reduced during their transport through conduits. Experimental results confirm that the size reduction was caused by both dehydration and breakdown. Based on the lab data, two mathematical models were developed to quantitatively calculate the resistance factor and the stable injection pressure as a function of the particle strength, particle opening ratio, and shear rate. This research provides significant insight into designing better millimeter-sized particle gel treatments intended for use in large openings, including open fractures, caves, worm holes, and conduits.
AB - Millimeter-sized (10 um∼mm) preformed particle gels (PPGs) have been used successfully as conformance control agents in more than 5,000 wells. They help to control both water and CO2 production through high-permeability streaks or conduits (large pore openings), which naturally exist or are aggravated either by mineral solutions or by a high injection pressure during the flooding process. This paper explores several factors that can have an important impact on the injectivity and plugging efficiency of PPGs in these conduits. Extensive experiments were conducted to examine the effect of the conduit's opening size and the PPG strength on the ratio of the particle size to the opening diameter, injectivity index, resistance factor, and plugging efficiency. Five-foot tubes with four internal diameters were designed to emulate the opening conduits. Three pressure taps were mounted along the tubes to monitor PPG transport and plugging performance. The results show that weak gel has less injection pressure at a large particle opening ratio compared to strong gel. PPG strength impacted injectivity more significantly than did particle opening ratio. Resistance factor increased as the brine concentration and conduit opening size increased. PPGs can significantly reduce the permeability of an open conduit and their plugging efficiency depends highly on the particle strength and the conduit's opening size. The particle size of PPG was reduced during their transport through conduits. Experimental results confirm that the size reduction was caused by both dehydration and breakdown. Based on the lab data, two mathematical models were developed to quantitatively calculate the resistance factor and the stable injection pressure as a function of the particle strength, particle opening ratio, and shear rate. This research provides significant insight into designing better millimeter-sized particle gel treatments intended for use in large openings, including open fractures, caves, worm holes, and conduits.
UR - https://www.scopus.com/pages/publications/84905724874
M3 - Conference contribution
AN - SCOPUS:84905724874
SN - 9781632663863
T3 - Proceedings - SPE Symposium on Improved Oil Recovery
SP - 1098
EP - 1112
BT - Society of Petroleum Engineers - 19th SPE Improved Oil Recovery Symposium, IOR 2014
PB - Society of Petroleum Engineers (SPE)
ER -