Power generation from canal system using adjustable Twisted Blade Turbine

M. Usama; S. Habib; H. Hussain

doi:10.1109/ICET.2015.7389181

Power generation from canal system using adjustable Twisted Blade Turbine

M. Usama, S. Habib, H. Hussain

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

As natural head of water turbine has been used for power generation where the construction of a dam is infeasible. It works on natural flow of water to generate a specific power output. Although the velocity of canal water is less but the force of water is comparatively high. Pakistan has the largest canal system in the world and it can be implemented anywhere in the canal. At present, in Pakistan, energy crises are increasing day by day and hopefully this project can be helpful to minimize the same. The present work describes the development of a Twisted Blade Turbine which is simple in design, fabrication and maintenance which can produce sufficient power to light a couple of energy saver bulbs up to wattage of 30 to 40.

Original language	English
Title of host publication	Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781509004362
DOIs	https://doi.org/10.1109/ICET.2015.7389181
State	Published - 20 Jan 2016
Externally published	Yes

Publication series

Name	Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

Keywords

Adjustable Twisted Blade Turbine
Natural Flow
Natural Head
Twisted Blade Turbine

ASJC Scopus subject areas

Computer Networks and Communications
Signal Processing
Energy Engineering and Power Technology
Control and Systems Engineering
Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/ICET.2015.7389181

Cite this

Usama, M., Habib, S., & Hussain, H. (2016). Power generation from canal system using adjustable Twisted Blade Turbine. In Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015 Article 7389181 (Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICET.2015.7389181

@inproceedings{1c159cd1068f4d3088b19e4e5a728a51,

title = "Power generation from canal system using adjustable Twisted Blade Turbine",

abstract = "As natural head of water turbine has been used for power generation where the construction of a dam is infeasible. It works on natural flow of water to generate a specific power output. Although the velocity of canal water is less but the force of water is comparatively high. Pakistan has the largest canal system in the world and it can be implemented anywhere in the canal. At present, in Pakistan, energy crises are increasing day by day and hopefully this project can be helpful to minimize the same. The present work describes the development of a Twisted Blade Turbine which is simple in design, fabrication and maintenance which can produce sufficient power to light a couple of energy saver bulbs up to wattage of 30 to 40.",

keywords = "Adjustable Twisted Blade Turbine, Natural Flow, Natural Head, Twisted Blade Turbine",

author = "M. Usama and S. Habib and H. Hussain",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.",

year = "2016",

month = jan,

day = "20",

doi = "10.1109/ICET.2015.7389181",

language = "English",

series = "Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015",

address = "United States",

}

Usama, M, Habib, S & Hussain, H 2016, Power generation from canal system using adjustable Twisted Blade Turbine. in Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015., 7389181, Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015, Institute of Electrical and Electronics Engineers Inc. https://doi.org/10.1109/ICET.2015.7389181

Power generation from canal system using adjustable Twisted Blade Turbine. / Usama, M.; Habib, S.; Hussain, H.
Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015. Institute of Electrical and Electronics Engineers Inc., 2016. 7389181 (Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power generation from canal system using adjustable Twisted Blade Turbine

AU - Usama, M.

AU - Habib, S.

AU - Hussain, H.

PY - 2016/1/20

Y1 - 2016/1/20

N2 - As natural head of water turbine has been used for power generation where the construction of a dam is infeasible. It works on natural flow of water to generate a specific power output. Although the velocity of canal water is less but the force of water is comparatively high. Pakistan has the largest canal system in the world and it can be implemented anywhere in the canal. At present, in Pakistan, energy crises are increasing day by day and hopefully this project can be helpful to minimize the same. The present work describes the development of a Twisted Blade Turbine which is simple in design, fabrication and maintenance which can produce sufficient power to light a couple of energy saver bulbs up to wattage of 30 to 40.

AB - As natural head of water turbine has been used for power generation where the construction of a dam is infeasible. It works on natural flow of water to generate a specific power output. Although the velocity of canal water is less but the force of water is comparatively high. Pakistan has the largest canal system in the world and it can be implemented anywhere in the canal. At present, in Pakistan, energy crises are increasing day by day and hopefully this project can be helpful to minimize the same. The present work describes the development of a Twisted Blade Turbine which is simple in design, fabrication and maintenance which can produce sufficient power to light a couple of energy saver bulbs up to wattage of 30 to 40.

KW - Adjustable Twisted Blade Turbine

KW - Natural Flow

KW - Natural Head

KW - Twisted Blade Turbine

UR - https://www.scopus.com/pages/publications/84963571276

U2 - 10.1109/ICET.2015.7389181

DO - 10.1109/ICET.2015.7389181

M3 - Conference contribution

AN - SCOPUS:84963571276

T3 - Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015

BT - Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Usama M, Habib S, Hussain H. Power generation from canal system using adjustable Twisted Blade Turbine. In Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015. Institute of Electrical and Electronics Engineers Inc. 2016. 7389181. (Proceedings of 2015 International Conference on Emerging Technologies, ICET 2015). doi: 10.1109/ICET.2015.7389181

Power generation from canal system using adjustable Twisted Blade Turbine

Abstract

Publication series

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Fingerprint

Cite this