Performance analysis of a novel two-bed adsorption humidification-dehumidification desalination system using Metal-organic framework 801

Ahmed E. Abu El-Maaty, Hazem K. Abdallah, Rached Ben-Mansour*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

8 Scopus citations

Abstract

Adsorption desalination techniques have been increasingly studied over the last century as a sustainable option for meeting the rapidly growing demand for fresh water. One of the attractive factors for using adsorption desalination systems is the use of low-grade thermal energy normally wasted in the atmosphere. The current study introduces a novel adsorption desalination system integrated with a humidification dehumidification system for producing potable water. Four system configurations are presented. The main distinction between them is the source of hot water used for the humidifier. Scheme #1 utilizes the heat of condensation, Scheme #2 applies the heat of condensation plus the heat of adsorption, while Scheme # 3 adds the outlet of heating water from the desorber as a source of heat to the humidifier. Scheme #4 is a standalone adsorption desalination system that applies chilled water to cool the condenser. The novelty of this system is the application of the chilled water from the evaporator to the dehumidifier to create the highest possible temperature difference necessary for the humidification and dehumidification process. This advantage allows larger water productivity, especially in hot humid regions. In this case, it is possible to extract water vapour in the ambient humid air, water vapour gained from the humidification process and water vapour condensed in the condenser of the adsorption desalination system. Moreover, we have used a novel material Metal Organic Frameworks 801 as an adsorbent for a highly efficient process. Based on the results, Scheme #3 produced the maximum amount of fresh water, 210 kg/h while Scheme #2 obtained the maximum gained output ratio, 4.4 with a minimum cost of 0.0079 $/L. A standalone adsorption system produced the minimum amount of distillate water and the lowest gained output ratio. It is not advisable to use a standalone adsorption system to produce distillate water; as the full desalination potential is not achieved.

Original languageEnglish
Article number118020
JournalEnergy Conversion and Management
Volume301
DOIs
StatePublished - 1 Feb 2024

Bibliographical note

Publisher Copyright:
© 2023 Elsevier Ltd

Keywords

  • - humidification
  • Adsorption
  • Dehumidification
  • Desalination
  • Energy
  • Metal-organic frameworks 801
  • Performance

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Nuclear Energy and Engineering
  • Fuel Technology
  • Energy Engineering and Power Technology

Fingerprint

Dive into the research topics of 'Performance analysis of a novel two-bed adsorption humidification-dehumidification desalination system using Metal-organic framework 801'. Together they form a unique fingerprint.

Cite this