On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia

Abdullah Al-Yami; Wajih Abu-Al-Saud; Farrukh Shahzad

doi:10.1109/UKSim.2016.51

On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia

Abdullah Al-Yami, Wajih Abu-Al-Saud, Farrukh Shahzad

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

Wireless automation is an emerging field of research that aims at significant savings in installation time and costs of cabling in automation systems, while providing a new level of flexibility for system design, reconfiguration, and agility. Wireless sensor networks (WSNs) are a rather new technology, with its origins tracing back to the early 1980s through the Distributed Sensor Networks (DSNs) program at the Defense Advanced Research Project Agency (DARPA) of the US Department of Defense. Industrial Wireless Sensor Network (IWSN) evolved from WSN and are specially designed, keeping in mind the demands and nature of industry. Two common protocols ZigBee and WirelessHART were designed for general commercial use and later adopted for industrial applications. ISA100.11a developed by International Society of Automation, was specially designed for IWSN. These protocols use layer structure which allow secure, fast and reliable data transfer. IEEE 802.15.4 is used at its physical layer with variable data slots. This paper presents the results of the simulation of ZigBee, WirelessHART and ISA100 protocols done using Castalia. In this paper. we compare and discuss the simulated results obtained from all three protocols. 31.00

Original language	English
Title of host publication	Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016
Editors	Glenn Jenkins, David Al-Dabass, Alessandra Orsoni, Richard Cant
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	293-298
Number of pages	6
ISBN (Electronic)	9781509008889
DOIs	https://doi.org/10.1109/UKSim.2016.51
State	Published - 22 Dec 2016

Publication series

Name	Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016

Bibliographical note

Publisher Copyright:
© 2016 IEEE.

Keywords

Castalia
ISA100.11a
IWSN
Industrial wireless sensor networks
Simulations
Wireless sensor networks
WirelessHART
Zigbee

ASJC Scopus subject areas

Computer Networks and Communications
Computer Science Applications
Modeling and Simulation

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/UKSim.2016.51

Cite this

Al-Yami, A., Abu-Al-Saud, W., & Shahzad, F. (2016). On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia. In G. Jenkins, D. Al-Dabass, A. Orsoni, & R. Cant (Eds.), Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016 (pp. 293-298). Article 7796722 (Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/UKSim.2016.51

Al-Yami, Abdullah ; Abu-Al-Saud, Wajih ; Shahzad, Farrukh. / On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia. Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016. editor / Glenn Jenkins ; David Al-Dabass ; Alessandra Orsoni ; Richard Cant. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 293-298 (Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016).

@inproceedings{978e6cc45a3244c1ad88f07973050f36,

title = "On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia",

abstract = "Wireless automation is an emerging field of research that aims at significant savings in installation time and costs of cabling in automation systems, while providing a new level of flexibility for system design, reconfiguration, and agility. Wireless sensor networks (WSNs) are a rather new technology, with its origins tracing back to the early 1980s through the Distributed Sensor Networks (DSNs) program at the Defense Advanced Research Project Agency (DARPA) of the US Department of Defense. Industrial Wireless Sensor Network (IWSN) evolved from WSN and are specially designed, keeping in mind the demands and nature of industry. Two common protocols ZigBee and WirelessHART were designed for general commercial use and later adopted for industrial applications. ISA100.11a developed by International Society of Automation, was specially designed for IWSN. These protocols use layer structure which allow secure, fast and reliable data transfer. IEEE 802.15.4 is used at its physical layer with variable data slots. This paper presents the results of the simulation of ZigBee, WirelessHART and ISA100 protocols done using Castalia. In this paper. we compare and discuss the simulated results obtained from all three protocols. 31.00",

keywords = "Castalia, ISA100.11a, IWSN, Industrial wireless sensor networks, Simulations, Wireless sensor networks, WirelessHART, Zigbee",

author = "Abdullah Al-Yami and Wajih Abu-Al-Saud and Farrukh Shahzad",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.",

year = "2016",

month = dec,

day = "22",

doi = "10.1109/UKSim.2016.51",

language = "English",

series = "Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "293--298",

editor = "Glenn Jenkins and David Al-Dabass and Alessandra Orsoni and Richard Cant",

booktitle = "Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016",

address = "United States",

}

Al-Yami, A, Abu-Al-Saud, W & Shahzad, F 2016, On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia. in G Jenkins, D Al-Dabass, A Orsoni & R Cant (eds), Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016., 7796722, Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016, Institute of Electrical and Electronics Engineers Inc., pp. 293-298. https://doi.org/10.1109/UKSim.2016.51

On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia. / Al-Yami, Abdullah; Abu-Al-Saud, Wajih; Shahzad, Farrukh.
Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016. ed. / Glenn Jenkins; David Al-Dabass; Alessandra Orsoni; Richard Cant. Institute of Electrical and Electronics Engineers Inc., 2016. p. 293-298 7796722 (Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia

AU - Al-Yami, Abdullah

AU - Abu-Al-Saud, Wajih

AU - Shahzad, Farrukh

PY - 2016/12/22

Y1 - 2016/12/22

N2 - Wireless automation is an emerging field of research that aims at significant savings in installation time and costs of cabling in automation systems, while providing a new level of flexibility for system design, reconfiguration, and agility. Wireless sensor networks (WSNs) are a rather new technology, with its origins tracing back to the early 1980s through the Distributed Sensor Networks (DSNs) program at the Defense Advanced Research Project Agency (DARPA) of the US Department of Defense. Industrial Wireless Sensor Network (IWSN) evolved from WSN and are specially designed, keeping in mind the demands and nature of industry. Two common protocols ZigBee and WirelessHART were designed for general commercial use and later adopted for industrial applications. ISA100.11a developed by International Society of Automation, was specially designed for IWSN. These protocols use layer structure which allow secure, fast and reliable data transfer. IEEE 802.15.4 is used at its physical layer with variable data slots. This paper presents the results of the simulation of ZigBee, WirelessHART and ISA100 protocols done using Castalia. In this paper. we compare and discuss the simulated results obtained from all three protocols. 31.00

AB - Wireless automation is an emerging field of research that aims at significant savings in installation time and costs of cabling in automation systems, while providing a new level of flexibility for system design, reconfiguration, and agility. Wireless sensor networks (WSNs) are a rather new technology, with its origins tracing back to the early 1980s through the Distributed Sensor Networks (DSNs) program at the Defense Advanced Research Project Agency (DARPA) of the US Department of Defense. Industrial Wireless Sensor Network (IWSN) evolved from WSN and are specially designed, keeping in mind the demands and nature of industry. Two common protocols ZigBee and WirelessHART were designed for general commercial use and later adopted for industrial applications. ISA100.11a developed by International Society of Automation, was specially designed for IWSN. These protocols use layer structure which allow secure, fast and reliable data transfer. IEEE 802.15.4 is used at its physical layer with variable data slots. This paper presents the results of the simulation of ZigBee, WirelessHART and ISA100 protocols done using Castalia. In this paper. we compare and discuss the simulated results obtained from all three protocols. 31.00

KW - Castalia

KW - ISA100.11a

KW - IWSN

KW - Industrial wireless sensor networks

KW - Simulations

KW - Wireless sensor networks

KW - WirelessHART

KW - Zigbee

UR - http://www.scopus.com/inward/record.url?scp=85011115076&partnerID=8YFLogxK

U2 - 10.1109/UKSim.2016.51

DO - 10.1109/UKSim.2016.51

M3 - Conference contribution

AN - SCOPUS:85011115076

T3 - Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016

SP - 293

EP - 298

BT - Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016

A2 - Jenkins, Glenn

A2 - Al-Dabass, David

A2 - Orsoni, Alessandra

A2 - Cant, Richard

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Al-Yami A, Abu-Al-Saud W, Shahzad F. On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia. In Jenkins G, Al-Dabass D, Orsoni A, Cant R, editors, Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016. Institute of Electrical and Electronics Engineers Inc. 2016. p. 293-298. 7796722. (Proceedings - 2016 UKSim-AMSS 18th International Conference on Computer Modelling and Simulation, UKSim 2016). doi: 10.1109/UKSim.2016.51

On Industrial Wireless Sensor Network (IWSN) and its simulation using Castalia

Abstract

Publication series

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Fingerprint

Cite this