Skip to main navigation Skip to search Skip to main content

Natural Fracture Characterization Through Digital Outcrop Model in Southwestern Saudi Arabia Geothermal Field

  • Daffa Arrofi
  • , Israa S. Abu-Mahfouz
  • , Jawad Rafiq
  • , Jarvis R. Cline
  • , Mutaz Al-Jafari
  • , Mohamed Al-Ghamdi

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

1 Scopus citations

Abstract

Geothermal energy is the heat energy stored in the subsurface of the Earth due to the decay of radioactive elements within the mantle and the crust (Schubert et al., 1980). This energy is continuously produced, making it a sustainable and renewable energy source (Owusu and Asumadu-Sarkodie, 2016). One of the key advantages of geothermal energy is its capacity to provide baseload power that can be run constantly to fulfill the energy demands of any society, making it a dependable and persistent source of energy. Unlike other renewable energy sources such as solar and wind, geothermal energy, it is not affected by weather or daylight and can supply a consistent source of electricity day and night. Saudi Arabia possesses significant geothermal resources along of western boundary for both volcanic and non-volcanic geothermal systems (Chandrasekharam et al., 2014; Lashin et al., 2014; Al-Douri et al.,2019; Abu-Mahfouz et al., 2023). One of the potential geothermal areas is in Jizan, Southwestern Saudi Arabia (Hussein et al., 2013; Chandrasekharam et al., 2016; Arrofi and Abu-Mahfouz, 2023). Despite the fact that Jizan has a medium-high enthalpy system, it is largely underutilized. One of the most prevalent challenges encountered during exploitation is a low permeability reservoir to allow fluid circulation. However, it can be addressed by undertaking a detailed study of characterizing natural fractures both in the surface and subsurface. Natural fractures might enhance fluid circulation and permeability, making geothermal extraction a more viable option (Arrofi et al., 2022; Viswanathan et al., 2022; Abu-Mahfouz et al., 2023). It is crucial to investigate the distribution, orientation, and connectivity of fractures in geothermal systems. In the Al-Ardah geothermal field, located in Jizan, hydrothermal fluid is believed to flow from the eastern region, following the dip direction of the regional faults, and discharge on the western side (Arrofi et al., 2023). The reservoir area is indicated to be in the eastern region of Al-Ardah within the granitic rock (Fig. 1). Additionally, the granitic rock in the Al-Ardah area had undergone significant alteration due to intense interaction with the thermal water (Lashin and Al Arifi, 2014). It also suggests that the reservoir is located in the eastern part of the hot springs area. This study aims to characterize fractures and investigate fluid flow in the eastern part of Al-Ardah, Jizan, using an outcrop analogue (see the study location in Fig. 1).

Original languageEnglish
Title of host publicationInternational Petroleum Technology Conference, IPTC 2024
PublisherInternational Petroleum Technology Conference (IPTC)
ISBN (Electronic)9781959025184
DOIs
StatePublished - 2024
Event2024 International Petroleum Technology Conference, IPTC 2024 - Dhahran, Saudi Arabia
Duration: 12 Feb 2024 → …

Publication series

NameInternational Petroleum Technology Conference, IPTC 2024

Conference

Conference2024 International Petroleum Technology Conference, IPTC 2024
Country/TerritorySaudi Arabia
CityDhahran
Period12/02/24 → …

Bibliographical note

Publisher Copyright:
Copyright © 2024, International Petroleum Technology Conference.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Fuel Technology

Fingerprint

Dive into the research topics of 'Natural Fracture Characterization Through Digital Outcrop Model in Southwestern Saudi Arabia Geothermal Field'. Together they form a unique fingerprint.

Cite this