Skip to main navigation Skip to search Skip to main content

Multistage tool path optimisation of single-point incremental forming process

  • Zhou Yan
  • , Hany Hassanin*
  • , Mahmoud Ahmed El-Sayed
  • , Hossam Mohamed Eldessouky
  • , Joy Rizki Pangestu Djuansjah
  • , Naser A. Alsaleh
  • , Khamis Essa
  • , Mahmoud Abdallah Ahmadein
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

26 Scopus citations

Abstract

Single-point incremental forming (SPIF) is a flexible technology that can form a wide range of sheet metal products without the need for using punch and die sets. As a relatively cheap and die-less process, this technology is preferable for small and medium customised production. However, the SPIF technology has drawbacks, such as the geometrical inaccuracy and the thickness uniformity of the shaped part. This research aims to optimise the formed part geometric accuracy and reduce the processing time of a two-stage forming strategy of SPIF. Finite element analysis (FEA) was initially used and validated using experimental literature data. Furthermore, the design of experiments (DoE) statistical approach was used to optimise the proposed two-stage SPIF technique. The mass scaling technique was applied during the finite element analysis to minimise the computational time. The results showed that the step size during forming stage two significantly affected the geometrical accuracy of the part, whereas the forming depth during stage one was insignificant to the part quality. It was also revealed that the geometrical improvement had taken place along the base and the wall regions. However, the areas near the clamp system showed minor improvements. The optimised two-stage strategy successfully decreased both the geometrical inaccuracy and processing time. After optimisation, the average values of the geometrical deviation and forming time were reduced by 25% and 55.56%, respectively.

Original languageEnglish
Article number6794
JournalMaterials
Volume14
Issue number22
DOIs
StatePublished - 1 Nov 2021
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2021 by the authors. Licensee MDPI, Basel, Switzerland.

Keywords

  • FEA
  • Forming
  • Incremental
  • Optimisation
  • SPIF
  • Sheet metal
  • Tool path

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics

Fingerprint

Dive into the research topics of 'Multistage tool path optimisation of single-point incremental forming process'. Together they form a unique fingerprint.

Cite this