Multi-mode ground reconfigurable MIMO antenna system

Rifaqat Hussain; Mohammad S. Sharawi

doi:10.1109/APCAP.2015.7374307

Multi-mode ground reconfigurable MIMO antenna system

Rifaqat Hussain, Mohammad S. Sharawi

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this work, a novel 4-element, meandered-line inverted F-shaped antenna is presented. The proposed design is multi-band, frequency agile with multiple-input-multiple-output (MIMO) operation capability. The additional mode of reconfigurability was obtained by controlling the surface currents on the ground plane. Reconfigurability in the proposed design is achieved using a unique combination of PIN and varactor diodes. PIN diodes are used for mode selection while varactor diodes are used for smooth variation of resonant frequencies over tuned bands. The proposed design covers several wireless standards including LTE 900 MHz, GSM 1800, WLAN 2450 MHz with several other bands in the frequency range between 0.7 to 3 GHz. The proposed antenna design is planar and realized on a single printed circuit board. The proposed design is a suitable candidate for mobile terminals and small wireless handheld devices for cognitive radio applications.

Original language	English
Title of host publication	Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	144-145
Number of pages	2
ISBN (Electronic)	9781479988969
DOIs	https://doi.org/10.1109/APCAP.2015.7374307
State	Published - 6 Jan 2016

Publication series

Name	Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

ASJC Scopus subject areas

Computer Networks and Communications
Electrical and Electronic Engineering

Access to Document

10.1109/APCAP.2015.7374307

Cite this

Hussain, R., & Sharawi, M. S. (2016). Multi-mode ground reconfigurable MIMO antenna system. In Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015 (pp. 144-145). Article 7374307 (Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/APCAP.2015.7374307

@inproceedings{d7f70206aa27449586abef83a39bf423,

title = "Multi-mode ground reconfigurable MIMO antenna system",

abstract = "In this work, a novel 4-element, meandered-line inverted F-shaped antenna is presented. The proposed design is multi-band, frequency agile with multiple-input-multiple-output (MIMO) operation capability. The additional mode of reconfigurability was obtained by controlling the surface currents on the ground plane. Reconfigurability in the proposed design is achieved using a unique combination of PIN and varactor diodes. PIN diodes are used for mode selection while varactor diodes are used for smooth variation of resonant frequencies over tuned bands. The proposed design covers several wireless standards including LTE 900 MHz, GSM 1800, WLAN 2450 MHz with several other bands in the frequency range between 0.7 to 3 GHz. The proposed antenna design is planar and realized on a single printed circuit board. The proposed design is a suitable candidate for mobile terminals and small wireless handheld devices for cognitive radio applications.",

author = "Rifaqat Hussain and Sharawi, \{Mohammad S.\}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.",

year = "2016",

month = jan,

day = "6",

doi = "10.1109/APCAP.2015.7374307",

language = "English",

series = "Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "144--145",

booktitle = "Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015",

address = "United States",

}

Hussain, R & Sharawi, MS 2016, Multi-mode ground reconfigurable MIMO antenna system. in Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015., 7374307, Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015, Institute of Electrical and Electronics Engineers Inc., pp. 144-145. https://doi.org/10.1109/APCAP.2015.7374307

Multi-mode ground reconfigurable MIMO antenna system. / Hussain, Rifaqat; Sharawi, Mohammad S.
Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015. Institute of Electrical and Electronics Engineers Inc., 2016. p. 144-145 7374307 (Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Multi-mode ground reconfigurable MIMO antenna system

AU - Hussain, Rifaqat

AU - Sharawi, Mohammad S.

PY - 2016/1/6

Y1 - 2016/1/6

N2 - In this work, a novel 4-element, meandered-line inverted F-shaped antenna is presented. The proposed design is multi-band, frequency agile with multiple-input-multiple-output (MIMO) operation capability. The additional mode of reconfigurability was obtained by controlling the surface currents on the ground plane. Reconfigurability in the proposed design is achieved using a unique combination of PIN and varactor diodes. PIN diodes are used for mode selection while varactor diodes are used for smooth variation of resonant frequencies over tuned bands. The proposed design covers several wireless standards including LTE 900 MHz, GSM 1800, WLAN 2450 MHz with several other bands in the frequency range between 0.7 to 3 GHz. The proposed antenna design is planar and realized on a single printed circuit board. The proposed design is a suitable candidate for mobile terminals and small wireless handheld devices for cognitive radio applications.

AB - In this work, a novel 4-element, meandered-line inverted F-shaped antenna is presented. The proposed design is multi-band, frequency agile with multiple-input-multiple-output (MIMO) operation capability. The additional mode of reconfigurability was obtained by controlling the surface currents on the ground plane. Reconfigurability in the proposed design is achieved using a unique combination of PIN and varactor diodes. PIN diodes are used for mode selection while varactor diodes are used for smooth variation of resonant frequencies over tuned bands. The proposed design covers several wireless standards including LTE 900 MHz, GSM 1800, WLAN 2450 MHz with several other bands in the frequency range between 0.7 to 3 GHz. The proposed antenna design is planar and realized on a single printed circuit board. The proposed design is a suitable candidate for mobile terminals and small wireless handheld devices for cognitive radio applications.

UR - https://www.scopus.com/pages/publications/84978435210

U2 - 10.1109/APCAP.2015.7374307

DO - 10.1109/APCAP.2015.7374307

M3 - Conference contribution

AN - SCOPUS:84978435210

T3 - Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015

SP - 144

EP - 145

BT - Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Hussain R, Sharawi MS. Multi-mode ground reconfigurable MIMO antenna system. In Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015. Institute of Electrical and Electronics Engineers Inc. 2016. p. 144-145. 7374307. (Proceedings of the 2015 IEEE 4th Asia-Pacific Conference on Antennas and Propagation, APCAP 2015). doi: 10.1109/APCAP.2015.7374307

Multi-mode ground reconfigurable MIMO antenna system

Abstract

Publication series

Bibliographical note

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this