Modelling surface-groundwater interaction in the Ruataniwha basin, Hawke's Bay, New Zealand

Modelling groundwater and surface water is important for integrated water resources management, especially when interaction between the river and the aquifer is high. A transient groundwater and surface water flow model was built for Ruataniwha basin, New Zealand. The model covers a long-time period; starting in 1990, when water resources development in the area started, to present date. For a better resolution, the simulation period was divided into 59 stress periods, and each stress period was divided to 10 time steps. The model uses data obtained from surface water, and groundwater collected over the last 20 years. Rivers and streams were divided into 28 segments and flow and streambed data at the beginning and end of each segment was used. Parameter estimation and optimisation 'PEST' was used for automatic calibration of hydraulic conductivity, groundwater recharge and storativity; whereas riverbed conductance was manually calibrated. Model results show that the rivers gain from the aquifer considerably more than the river losses. The cumulative groundwater abstraction over the last 20 years is approximately 210 million m ³. This amount is very low compared to other water budget components; however, the effect of groundwater abstraction on storage is significant. Based on the results of this study, it was found that the loss of storage over the last 20 years is more than 66 million m ³. Results also reveal that the effect of groundwater abstraction on rivers and springs flow is significant. The rivers gain from the groundwater system, and the springs flow have been decreasing.