Skip to main navigation Skip to search Skip to main content

Micromachinability Evaluation of Bottom-Pouring Stir Cast Al6061/GNPs Nanocomposites

  • Sunil Rawal
  • , Mayank Kumar
  • , Tharra Bhavani
  • , Ajay M. Sidpara*
  • , Jinu Paul
  • *Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

A novel class of materials called aluminum matrix composites has the potential to meet the requirements of advanced engineering applications. In the current study, Al6061-based GNP nanocomposites were fabricated using a bottom-pouring stir casting technique. Microstructural characterization techniques were used for analyzing the distribution of reinforcement particles and the presence of those particles in the nanocomposite. SEM micrographs showed the dendritic structure with a reduction of the casting defects due to the wetting agent. Intermetallic compounds were observed during the fabrication, which was confirmed by the XRD spectrum. The effect of GNPs on the matrix material was evaluated through mechanical characterization. The microhardness result showed a 25% increase in hardness than the base Al6061 alloy. The micromachinability of the fabricated nanocomposite was evaluated. Microchannels were machined using a two-fluted TiSiN-coated solid carbide end mill tool with a 500 µm diameter. The influence of micromachining parameters, including feed rate, spindle speed, and depth of cut on surface roughness and cutting force was analyzed. The ANOVA result showed that the optimum parameter was observed at a 21000 RPM spindle speed, 10 mm/min feed rate, and 200 µm depth of cut, which showed lower cutting force and high surface quality. The results showed that as spindle speed increased, Fy and Fz decreased by 35% and 13%, respectively, because of the thermal softening of the material. The optimum cutting parameter can generate a channel that is high in quality and dimensionally accurate with few little burrs.

Original languageEnglish
Title of host publicationMicro Manufacturing - Proceedings of the AIMTDR 2023
EditorsV.K. Jain, U.S. Rao, J.P. Misra, Biswanath Doloi
PublisherSpringer Science and Business Media Deutschland GmbH
Pages117-129
Number of pages13
ISBN (Print)9789819655496
DOIs
StatePublished - 2026
Externally publishedYes
Event9th International and 30th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2023 - Varanasi, India
Duration: 8 Dec 2023 → 10 Dec 2023

Publication series

NameLecture Notes in Mechanical Engineering
ISSN (Print)2195-4356
ISSN (Electronic)2195-4364

Conference

Conference9th International and 30th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2023
Country/TerritoryIndia
CityVaranasi
Period8/12/23 → 10/12/23

Bibliographical note

Publisher Copyright:
© The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2026.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Bottom-pouring stir casting
  • Machinability
  • Micromilling

ASJC Scopus subject areas

  • Automotive Engineering
  • Aerospace Engineering
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Fingerprint

Dive into the research topics of 'Micromachinability Evaluation of Bottom-Pouring Stir Cast Al6061/GNPs Nanocomposites'. Together they form a unique fingerprint.

Cite this