Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer

Yazan Al-Alem; Syed M. Sifat; Yahia M.M. Antar; Ahmed A. Kishk; Gaozhi Xiao

doi:10.1109/APS/URSI47566.2021.9704201

Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer

Yazan Al-Alem, Syed M. Sifat, Yahia M.M. Antar, Ahmed A. Kishk, Gaozhi Xiao

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

We propose a novel single-layer printed feed used with a low-cost 3D printed polarizer. The feed is made on a single substrate layer. The proposed antenna gain is 15 dBi, and the overlapped impedance-axial ratio bandwidth is 20 %.

Original language	English
Title of host publication	2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1425-1426
Number of pages	2
ISBN (Electronic)	9781728146706
DOIs	https://doi.org/10.1109/APS/URSI47566.2021.9704201
State	Published - 2021
Externally published	Yes

Publication series

Name	2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings

Bibliographical note

Publisher Copyright:
© 2021 IEEE.

Keywords

Circularly polarized antennas
Dielectric polarizers
high-gain antennas
Millimeter-wave antennas

ASJC Scopus subject areas

Computer Networks and Communications
Instrumentation

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/APS/URSI47566.2021.9704201

Cite this

Al-Alem, Y., Sifat, S. M., Antar, Y. M. M., Kishk, A. A., & Xiao, G. (2021). Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer. In 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings (pp. 1425-1426). (2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/APS/URSI47566.2021.9704201

Al-Alem, Yazan ; Sifat, Syed M. ; Antar, Yahia M.M. et al. / Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer. 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2021. pp. 1425-1426 (2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings).

@inproceedings{dc4a54f462d345b6bb99e04b991a2e1a,

title = "Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer",

abstract = "We propose a novel single-layer printed feed used with a low-cost 3D printed polarizer. The feed is made on a single substrate layer. The proposed antenna gain is 15 dBi, and the overlapped impedance-axial ratio bandwidth is 20 %.",

keywords = "Circularly polarized antennas, Dielectric polarizers, high-gain antennas, Millimeter-wave antennas",

author = "Yazan Al-Alem and Sifat, {Syed M.} and Antar, {Yahia M.M.} and Kishk, {Ahmed A.} and Gaozhi Xiao",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.",

year = "2021",

doi = "10.1109/APS/URSI47566.2021.9704201",

language = "English",

series = "2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1425--1426",

booktitle = "2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings",

address = "United States",

}

Al-Alem, Y, Sifat, SM, Antar, YMM, Kishk, AA & Xiao, G 2021, Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer. in 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings. 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 1425-1426. https://doi.org/10.1109/APS/URSI47566.2021.9704201

Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer. / Al-Alem, Yazan; Sifat, Syed M.; Antar, Yahia M.M. et al.
2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2021. p. 1425-1426 (2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer

AU - Al-Alem, Yazan

AU - Sifat, Syed M.

AU - Antar, Yahia M.M.

AU - Kishk, Ahmed A.

AU - Xiao, Gaozhi

PY - 2021

Y1 - 2021

N2 - We propose a novel single-layer printed feed used with a low-cost 3D printed polarizer. The feed is made on a single substrate layer. The proposed antenna gain is 15 dBi, and the overlapped impedance-axial ratio bandwidth is 20 %.

AB - We propose a novel single-layer printed feed used with a low-cost 3D printed polarizer. The feed is made on a single substrate layer. The proposed antenna gain is 15 dBi, and the overlapped impedance-axial ratio bandwidth is 20 %.

KW - Circularly polarized antennas

KW - Dielectric polarizers

KW - high-gain antennas

KW - Millimeter-wave antennas

UR - http://www.scopus.com/inward/record.url?scp=85126076850&partnerID=8YFLogxK

U2 - 10.1109/APS/URSI47566.2021.9704201

DO - 10.1109/APS/URSI47566.2021.9704201

M3 - Conference contribution

AN - SCOPUS:85126076850

T3 - 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings

SP - 1425

EP - 1426

BT - 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Al-Alem Y, Sifat SM, Antar YMM, Kishk AA, Xiao G. Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer. In 2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2021. p. 1425-1426. (2021 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, APS/URSI 2021 - Proceedings). doi: 10.1109/APS/URSI47566.2021.9704201

Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer

Abstract

Publication series

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Fingerprint

Cite this