IN-HOUSE DESIGN AND FABRICATION OF FLAT PLATE SOLAR COLLECTOR FOR HOT WATER SYSTEM.

J. M. Al-Ansari; M. A. Abdelrahman

IN-HOUSE DESIGN AND FABRICATION OF FLAT PLATE SOLAR COLLECTOR FOR HOT WATER SYSTEM.

J. M. Al-Ansari^*
, M. A. Abdelrahman

^*Corresponding author for this work

King Fahd University of Petroleum & Minerals

Research output: Contribution to conference › Paper › peer-review

Abstract

The adaptation of solar technology to the technical, environmental and economic constraints of Saudi Arabia is presented in this paper. To reduce the price of flat plate solar collectors and to solve the problems due to the impact of local environmental conditions, the procedure of fabrication and the choice of materials were made on the basis of their physical and thermal properties as well as availability and economics. The procedure given by ASHRAE Standard 93-77 was used for testing the collector.

Original language	English
Pages	191-203
Number of pages	13
State	Published - 1985

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

ASJC Scopus subject areas

General Engineering

Cite this

@conference{a6915016118a4c8e87084372d1f1f3a1,

title = "IN-HOUSE DESIGN AND FABRICATION OF FLAT PLATE SOLAR COLLECTOR FOR HOT WATER SYSTEM.",

abstract = "The adaptation of solar technology to the technical, environmental and economic constraints of Saudi Arabia is presented in this paper. To reduce the price of flat plate solar collectors and to solve the problems due to the impact of local environmental conditions, the procedure of fabrication and the choice of materials were made on the basis of their physical and thermal properties as well as availability and economics. The procedure given by ASHRAE Standard 93-77 was used for testing the collector.",

author = "Al-Ansari, \{J. M.\} and Abdelrahman, \{M. A.\}",

year = "1985",

language = "English",

pages = "191--203",

}

TY - CONF

T1 - IN-HOUSE DESIGN AND FABRICATION OF FLAT PLATE SOLAR COLLECTOR FOR HOT WATER SYSTEM.

AU - Al-Ansari, J. M.

AU - Abdelrahman, M. A.

PY - 1985

Y1 - 1985

N2 - The adaptation of solar technology to the technical, environmental and economic constraints of Saudi Arabia is presented in this paper. To reduce the price of flat plate solar collectors and to solve the problems due to the impact of local environmental conditions, the procedure of fabrication and the choice of materials were made on the basis of their physical and thermal properties as well as availability and economics. The procedure given by ASHRAE Standard 93-77 was used for testing the collector.

AB - The adaptation of solar technology to the technical, environmental and economic constraints of Saudi Arabia is presented in this paper. To reduce the price of flat plate solar collectors and to solve the problems due to the impact of local environmental conditions, the procedure of fabrication and the choice of materials were made on the basis of their physical and thermal properties as well as availability and economics. The procedure given by ASHRAE Standard 93-77 was used for testing the collector.

UR - https://www.scopus.com/pages/publications/0022280518

M3 - Paper

AN - SCOPUS:0022280518

SP - 191

EP - 203

ER -

IN-HOUSE DESIGN AND FABRICATION OF FLAT PLATE SOLAR COLLECTOR FOR HOT WATER SYSTEM.

Abstract

UN SDGs

ASJC Scopus subject areas

Fingerprint

Cite this