Improving the thermo-economic performance of hemispherical solar distiller using copper oxide nanofluids and phase change materials: Experimental and theoretical investigation

In the present work, a thermo-economic performance of the modified hemispherical solar still (MHSS) was studied and compared to traditional hemispherical solar still (THSS). The modulations accounted for two additives, namely: paraffin wax as phase change materials (PCM), and copper oxide (CuO) nanoparticles. Three cases of MHSS were investigated and compared to THSS: (0.3 wt%) CuO nanomaterials were immersed in the basin water, implementing PCM container below the basin, and combining PCM container below the basin plus mixing CuO nanoparticles in the basin water. The basin water depth in all stills was set at 1.0 cm in all cases. Moreover, the thermo-economic performance of the four studied cases was compared and evaluated by determining the freshwater productivity, the daily energy efficiency, and the freshwater cost. Experiments have been carried out on the proposed hemispherical distillers under hot climatic conditions of El-Oued (33°27′N, 7°11′E), Algeria. The results show that the single utilization of CuO/water nanofluid and pure PCM improved productivity by 60.41% and 29.17%, respectively, compared to THSS. While, the dual usage of PCM and CuO/water nanofluid further enhanced the productivity by up to 80.20%, relative to THSS. Moreover, the daily energy efficiencies of the hemispherical distillers under the different studied cases (THSS, MHSS/PCM, MHSS/CuO-water nanofluid, and MHSS/PCM + CuO-water nanofluid) were found to be 35.52%, 45.45%, 56.46%, and 63.61%), respectively. The economic feasibility of these modifications presented that the dual usage of PCM and CuO/water nanofluid is more effective as it reduces the cost of freshwater production by 75% compared to THSS.