Hot corrosion behavior of plasma and HVOF sprayed Co- and Ni-based coatings at 900°C

High temperature Co- and Ni-based metallic coatings were applied on samples of 310 stainless steel using plasma spray and high velocity oxy fuel (HVOF) methods. The samples were sprayed with Na₂SO₄, V ₂O₅ and NaCl salt solutions and exposed in air at 900°C to cyclic conditions with an aim to simulate an environment typically encountered in oil refinery operation. Extent of hot corrosion damage was assessed using gravimetric measurements while microstructure of the coatings was examined using scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. X-ray diffraction was used to determine phase constitution. The aim of this study was to evaluate and compare the performance of specific coatings in hot corrosive environments. Experimental results indicate that the presence of V₂O₅ and NaCl serves to enhance hot corrosion while Co-based coatings perform better than Ni-based coating.