High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology

Yazan Al-Alem; Syed M. Sifat; Yahia M.M. Antar; Ahmed A. Kishk

doi:10.1109/ANTEM51107.2021.9518922

High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology

Yazan Al-Alem
, Syed M. Sifat
, Yahia M.M. Antar
, Ahmed A. Kishk

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

We propose a low cost high gain circularly polarized antenna, the proposed antenna achieves a gain of 20-dBi, and an axial ratio bandwidth of 6.5%. The proposed antenna is extremely low in cost and avoids the design of any feeding network. The antenna is well suited for narrow band mm-wave applications.

Original language	English
Title of host publication	2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665403351
DOIs	https://doi.org/10.1109/ANTEM51107.2021.9518922
State	Published - 8 Aug 2021
Externally published	Yes

Publication series

Name	2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021

Bibliographical note

Publisher Copyright:
© 2021 IEEE.

Keywords

Electromagnetic bandgap structures
circularly polarized antennas
high-gain antennas
soft and hard surfaces

ASJC Scopus subject areas

Computer Networks and Communications
Electrical and Electronic Engineering
Instrumentation
Radiation

Access to Document

10.1109/ANTEM51107.2021.9518922

Cite this

Al-Alem, Y., Sifat, S. M., Antar, Y. M. M., & Kishk, A. A. (2021). High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology. In 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021 (2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ANTEM51107.2021.9518922

Al-Alem, Yazan ; Sifat, Syed M. ; Antar, Yahia M.M. et al. / High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology. 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021. Institute of Electrical and Electronics Engineers Inc., 2021. (2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021).

@inproceedings{32522eb5e48b4de1a8e6256844aec7b0,

title = "High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology",

abstract = "We propose a low cost high gain circularly polarized antenna, the proposed antenna achieves a gain of 20-dBi, and an axial ratio bandwidth of 6.5\%. The proposed antenna is extremely low in cost and avoids the design of any feeding network. The antenna is well suited for narrow band mm-wave applications.",

keywords = "Electromagnetic bandgap structures, circularly polarized antennas, high-gain antennas, soft and hard surfaces",

author = "Yazan Al-Alem and Sifat, \{Syed M.\} and Antar, \{Yahia M.M.\} and Kishk, \{Ahmed A.\}",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.",

year = "2021",

month = aug,

day = "8",

doi = "10.1109/ANTEM51107.2021.9518922",

language = "English",

series = "2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021",

address = "United States",

}

Al-Alem, Y, Sifat, SM, Antar, YMM & Kishk, AA 2021, High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology. in 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021. 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021, Institute of Electrical and Electronics Engineers Inc. https://doi.org/10.1109/ANTEM51107.2021.9518922

High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology. / Al-Alem, Yazan; Sifat, Syed M.; Antar, Yahia M.M. et al.
2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021. Institute of Electrical and Electronics Engineers Inc., 2021. (2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology

AU - Al-Alem, Yazan

AU - Sifat, Syed M.

AU - Antar, Yahia M.M.

AU - Kishk, Ahmed A.

PY - 2021/8/8

Y1 - 2021/8/8

N2 - We propose a low cost high gain circularly polarized antenna, the proposed antenna achieves a gain of 20-dBi, and an axial ratio bandwidth of 6.5%. The proposed antenna is extremely low in cost and avoids the design of any feeding network. The antenna is well suited for narrow band mm-wave applications.

AB - We propose a low cost high gain circularly polarized antenna, the proposed antenna achieves a gain of 20-dBi, and an axial ratio bandwidth of 6.5%. The proposed antenna is extremely low in cost and avoids the design of any feeding network. The antenna is well suited for narrow band mm-wave applications.

KW - Electromagnetic bandgap structures

KW - circularly polarized antennas

KW - high-gain antennas

KW - soft and hard surfaces

UR - https://www.scopus.com/pages/publications/85115060659

U2 - 10.1109/ANTEM51107.2021.9518922

DO - 10.1109/ANTEM51107.2021.9518922

M3 - Conference contribution

AN - SCOPUS:85115060659

T3 - 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021

BT - 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Al-Alem Y, Sifat SM, Antar YMM, Kishk AA. High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology. In 2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021. Institute of Electrical and Electronics Engineers Inc. 2021. (2021 IEEE 19th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2021). doi: 10.1109/ANTEM51107.2021.9518922

High Gain Circularly Polarized 30 GHz Antenna using 3D Printing Technology

Abstract

Publication series

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this