Fault current characteristics of multi-terminal HVDC system

Jong Geon Lee; Urner Amir Khan; Sung Woo Lim; Ho Yun Lee; Bang Wook Lee; Young Geun Kim; Jung Wook Sim

doi:10.1109/ICEPE-ST.2015.7368378

Fault current characteristics of multi-terminal HVDC system

Jong Geon Lee
, Urner Amir Khan
, Sung Woo Lim
, Ho Yun Lee
, Bang Wook Lee
, Young Geun Kim
, Jung Wook Sim

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

Owing to the type and structure of HVDC system, fault current characteristics can be varied. Until the present, most of studies have been dealt with fault current characteristic of HVDC system which focused on point-to-point connection. However, there were few announcements about the fault current characteristic of MTDC system. In this works, as a first step to determine the characteristics of circuit breaker for MTDC network, simulation works of fault current characteristics in MTDC system was investigated. Two types of MTDC system model were designed by Matlab/Simulink; Tree-like topology and Meshed topology. Pole to pole fault which is the severe fault in HVDC system was imposed and its characteristics was analyzed and compared. From the simulation result, the characteristics of fault current in MTDC system were analyzed and basic requirements for HVDC circuit breaker were suggested.

Original language	English
Title of host publication	2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	566-569
Number of pages	4
ISBN (Electronic)	9781467374149
DOIs	https://doi.org/10.1109/ICEPE-ST.2015.7368378
State	Published - 29 Dec 2015
Externally published	Yes
Event	3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015 - Busan, Korea, Republic of Duration: 25 Oct 2015 → 28 Oct 2015

Publication series

Name	2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015

Conference

Conference	3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015
Country/Territory	Korea, Republic of
City	Busan
Period	25/10/15 → 28/10/15

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

Keywords

HVDC fault current
Multi-terminal HVDC
VSC-HVDC

ASJC Scopus subject areas

Electrical and Electronic Engineering
Energy Engineering and Power Technology

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/ICEPE-ST.2015.7368378

Cite this

Lee, J. G., Khan, U. A., Lim, S. W., Lee, H. Y., Lee, B. W., Kim, Y. G., & Sim, J. W. (2015). Fault current characteristics of multi-terminal HVDC system. In 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015 (pp. 566-569). Article 7368378 (2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEPE-ST.2015.7368378

Lee, Jong Geon ; Khan, Urner Amir ; Lim, Sung Woo et al. / Fault current characteristics of multi-terminal HVDC system. 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 566-569 (2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015).

@inproceedings{3b95c726e7684950aa9c279e73db3cd0,

title = "Fault current characteristics of multi-terminal HVDC system",

abstract = "Owing to the type and structure of HVDC system, fault current characteristics can be varied. Until the present, most of studies have been dealt with fault current characteristic of HVDC system which focused on point-to-point connection. However, there were few announcements about the fault current characteristic of MTDC system. In this works, as a first step to determine the characteristics of circuit breaker for MTDC network, simulation works of fault current characteristics in MTDC system was investigated. Two types of MTDC system model were designed by Matlab/Simulink; Tree-like topology and Meshed topology. Pole to pole fault which is the severe fault in HVDC system was imposed and its characteristics was analyzed and compared. From the simulation result, the characteristics of fault current in MTDC system were analyzed and basic requirements for HVDC circuit breaker were suggested.",

keywords = "HVDC fault current, Multi-terminal HVDC, VSC-HVDC",

author = "Lee, \{Jong Geon\} and Khan, \{Urner Amir\} and Lim, \{Sung Woo\} and Lee, \{Ho Yun\} and Lee, \{Bang Wook\} and Kim, \{Young Geun\} and Sim, \{Jung Wook\}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015 ; Conference date: 25-10-2015 Through 28-10-2015",

year = "2015",

month = dec,

day = "29",

doi = "10.1109/ICEPE-ST.2015.7368378",

language = "English",

series = "2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "566--569",

booktitle = "2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015",

address = "United States",

}

Lee, JG, Khan, UA, Lim, SW, Lee, HY, Lee, BW, Kim, YG & Sim, JW 2015, Fault current characteristics of multi-terminal HVDC system. in 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015., 7368378, 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015, Institute of Electrical and Electronics Engineers Inc., pp. 566-569, 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015, Busan, Korea, Republic of, 25/10/15. https://doi.org/10.1109/ICEPE-ST.2015.7368378

Fault current characteristics of multi-terminal HVDC system. / Lee, Jong Geon; Khan, Urner Amir; Lim, Sung Woo et al.
2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015. Institute of Electrical and Electronics Engineers Inc., 2015. p. 566-569 7368378 (2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fault current characteristics of multi-terminal HVDC system

AU - Lee, Jong Geon

AU - Khan, Urner Amir

AU - Lim, Sung Woo

AU - Lee, Ho Yun

AU - Lee, Bang Wook

AU - Kim, Young Geun

AU - Sim, Jung Wook

PY - 2015/12/29

Y1 - 2015/12/29

N2 - Owing to the type and structure of HVDC system, fault current characteristics can be varied. Until the present, most of studies have been dealt with fault current characteristic of HVDC system which focused on point-to-point connection. However, there were few announcements about the fault current characteristic of MTDC system. In this works, as a first step to determine the characteristics of circuit breaker for MTDC network, simulation works of fault current characteristics in MTDC system was investigated. Two types of MTDC system model were designed by Matlab/Simulink; Tree-like topology and Meshed topology. Pole to pole fault which is the severe fault in HVDC system was imposed and its characteristics was analyzed and compared. From the simulation result, the characteristics of fault current in MTDC system were analyzed and basic requirements for HVDC circuit breaker were suggested.

AB - Owing to the type and structure of HVDC system, fault current characteristics can be varied. Until the present, most of studies have been dealt with fault current characteristic of HVDC system which focused on point-to-point connection. However, there were few announcements about the fault current characteristic of MTDC system. In this works, as a first step to determine the characteristics of circuit breaker for MTDC network, simulation works of fault current characteristics in MTDC system was investigated. Two types of MTDC system model were designed by Matlab/Simulink; Tree-like topology and Meshed topology. Pole to pole fault which is the severe fault in HVDC system was imposed and its characteristics was analyzed and compared. From the simulation result, the characteristics of fault current in MTDC system were analyzed and basic requirements for HVDC circuit breaker were suggested.

KW - HVDC fault current

KW - Multi-terminal HVDC

KW - VSC-HVDC

UR - https://www.scopus.com/pages/publications/84962860758

U2 - 10.1109/ICEPE-ST.2015.7368378

DO - 10.1109/ICEPE-ST.2015.7368378

M3 - Conference contribution

AN - SCOPUS:84962860758

T3 - 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015

SP - 566

EP - 569

BT - 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015

Y2 - 25 October 2015 through 28 October 2015

ER -

Lee JG, Khan UA, Lim SW, Lee HY, Lee BW, Kim YG et al. Fault current characteristics of multi-terminal HVDC system. In 2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015. Institute of Electrical and Electronics Engineers Inc. 2015. p. 566-569. 7368378. (2015 3rd International Conference on Electric Power Equipment - Switching Technology, ICEPE-ST 2015). doi: 10.1109/ICEPE-ST.2015.7368378

Fault current characteristics of multi-terminal HVDC system

Abstract

Publication series

Conference

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Fingerprint

Cite this