Experimental Investigation of Using Manganese Monoxide as a Hydrogen Sulfide Scavenger for Aqueous Drilling Fluids

Ashraf Ahmed, Salaheldin Elkatatny*, Sagheer A. Onaizi

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

2 Scopus citations

Abstract

One of the most serious safety and health concerns during drilling oil and gas wells is the potential release of hydrogen sulfide (H2S) to the surface, exposing workers to high risks. Serious corrosion-related damage to handling equipment is also inevitable in the presence of H2S. Various H2S scavengers have been utilized, but each has its pros and cons; hence, research is continuing to develop an optimum and feasible scavenger. Since manganese monoxide (MnO) is a reactive metal oxide with high oxidation and absorption capabilities, it may have the potential to effectively scavenge H2S during drilling operations when included in drilling mud formulations. Consequently, the key aim of this work is to investigate the H2S scavenging performance of the aqueous drilling fluid containing MnO. This work studied the impact of MnO addition on the drilling mud’s alkalinity, rheological behavior, filtration performance, and corrosion tendency. The experiments were also conducted for mud without a scavenger and a fluid containing the SourScav commercial scavenger, which serves as a benchmarking reference. The findings demonstrated that MnO performed exceptionally well for H2S scavenging where it boosted the aqueous mud’s scavenging capacity from 84.3 to 426.2 mg of H2S/L of mud, showing more than 400% improvement relative to the base mud. Additionally, this scavenging performance is about 2.1 times higher than that of the commercial scavenger. As opposed to SourScav, MnO maintained the mud’s pH at a safe level above 10. The addition of either MnO or SourScav did not weaken the mud rheology and provided practically satisfactory rheological parameters. Both SourScav and MnO marginally increased the formed filter-cake thickness from 2.9 to 3.9 mm with a slight increment in the filtrated volume but still within the acceptable limits. The corrosion test indicated the noncorrosive characteristics (i.e., the corrosion rate was nearly zero) of MnO and the commercial scavenger. This study illustrates the promising utilization of MnO as a cost-effective H2S scavenger, enhancing the efficiency and safety of drilling operations.

Original languageEnglish
Pages (from-to)46738-46745
Number of pages8
JournalACS Omega
Volume8
Issue number49
DOIs
StatePublished - 12 Dec 2023

Bibliographical note

Publisher Copyright:
© 2023 The Authors. Published by American Chemical Society

ASJC Scopus subject areas

  • General Chemistry
  • General Chemical Engineering

Fingerprint

Dive into the research topics of 'Experimental Investigation of Using Manganese Monoxide as a Hydrogen Sulfide Scavenger for Aqueous Drilling Fluids'. Together they form a unique fingerprint.

Cite this