Experimental analysis of the heat transfer rate of phase change material inside a horizontal cylindrical latent heat energy storage system

Latent heat thermal energy storage system can help in the smooth operation of energy supply and demand. In the present work, experimental study was performed to analyze the heat transfer rate of phase change material inside an annulus. A copper pipe (centrally loaded) runs the length of a cylindrical container during both discharging and charging modes. The overall heat transfer rate is enhanced during phase change process by adding longitudinal fins with the copper pipe. These longitudinal fins were tilted at an angle of 120⁰. Paraffin wax is used as phase change material. The main objective of the experiment is to analyze the heat transfer rate during the solidification and liquefaction of PCM. Also, the effect of mass flow rate and inlet temperature of heat transfer fluid was analyzed. Conduction was found to be the primary heat transfer mechanism during the initial stages of charging. Once the PCM get liquefied inside the system, natural convection gets dominated. During the solidification of PCM conduction heat transfer get dominated. Also, it was observed that melting duration is strongly affected by the inlet temperature of HTF while the flow rate slightly affects the melting duration.