Skip to main navigation Skip to search Skip to main content

Evaluation of the wear of plasma-nitrided and TiN-coated HSS drills using conventional and Micro-PIXE techniques

  • J. Nickel*
  • , A. N. Shuaib
  • , B. S. Yilbas
  • , S. M. Nizam
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

24 Scopus citations

Abstract

The machining performance of high-speed steel (HSS) twist drills that were plasma-nitrided before applying physical vapor deposition (PVD) titanium nitride (TiN) coating was evaluated and compared with that of representative, commercially TiN-coated drills. The performance criteria were (i) the tool lives from the flank wear land measurements of the drills, and (ii) the wear features from micro particle-induced X-ray emission (Micro-PIXE), SEM and EDS examinations of two representative TiN-coated drills. The flank wear measurements indicated that the pre-nitrided drills had longer tool life than the commercial drills. The wear features of the pre-nitrided drill indicated that the TiN coating was subjected to progressive wear processes. On the other hand, the wear patterns of the commercial drill revealed that the TiN coating experienced interfacial spalling. Plasma nitriding prior to the application of the TiN coating is one explanation for the improvement in the machining performance of the pre-nitrided drills and for the observed differences in the wear mechanisms of the two types of drills. (C) 2000 Elsevier Science S.A. All rights reserved.

Original languageEnglish
Pages (from-to)155-167
Number of pages13
JournalWear
Volume239
Issue number2
DOIs
StatePublished - Apr 2000

Bibliographical note

Funding Information:
The authors would like to acknowledge the support of the King Fahd University of Petroleum and Minerals through the Center for Applied Physical Sciences of the Research Institute and the Mechanical Engineering Department. Thanks are due to the staff of the Mechanical Engineering Workshop and the Tandetron Accelerator Laboratory for their assistance during the experimental work.

Keywords

  • Drilling
  • HSS drills
  • Micro-PIXE
  • PVD TiN coating
  • Plasma nitriding
  • Tool wear

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Evaluation of the wear of plasma-nitrided and TiN-coated HSS drills using conventional and Micro-PIXE techniques'. Together they form a unique fingerprint.

Cite this