Effect of recycled crushed glass and recycled coarse aggregate on the properties of self-compacting concrete

This research was developed to use recycled coarse aggregate (RCA) and recycled crushed glass (RCG) to produce self-compacting concrete (SCC) mixtures. Natural coarse aggregate (NCA) was replaced by RCA from 0% to 100%, and natural fine aggregate (NFA) was replaced by RCG from 0% to 20%. Slump flow with T₅₀₀ time, L-box, and V-funnel tests were done to ascertain the workability properties of SCC mixtures. The mechanical properties studied were compressive, flexural, and splitting tensile strength at 28 and 56 days. Ultrasonic pulse velocities (UPV) were also measured for the SCC mixtures at 28 and 56 days. Ten shear-critical beams with different shear span-to-depth (a/d) ratios were also cast and tested under 4-point bending. Cracking load, failure load, load-midspan deflection curves, and deflection corresponding to ultimate load were observed. The recommendations of the American Concrete Institute (ACI 318–14 and ACI 318–19), Eurocode (EC2), and Japanese Society of Civil Engineers (JSCE) for shear design were also evaluated on a database of 222 beams cast with SCC and recycled aggregate concrete (RAC) along with the beams tested in the presented study. Results indicate that the workability and mechanical properties were reduced when the replacement level of RCA was increased. The use of RCG as a replacement for NFA enhanced the workability properties and mechanical properties at the age of 56 days. The replacement of NCA with RCA slightly reduced the shear capacity and stiffness of the RC beams. However, the shear capacity and stiffness of RC beams improved when NFA was replaced with RCG. The design provisions of ACI 318–19 yielded accurate estimates of shear capacity compared to JCSE, EC 2, and ACI 318–14.