Effect of composition and heat treatment on porosity and microstructures of technical ceramics made from kaolin and IG-017 additive

Emese Kurovics; László A. Gömze; Jamal Eldin F.M. Ibrahim; Ludmila N. Gömze

doi:10.1088/1757-899X/613/1/012025

Effect of composition and heat treatment on porosity and microstructures of technical ceramics made from kaolin and IG-017 additive

Emese Kurovics
, László A. Gömze
, Jamal Eldin F.M. Ibrahim
, Ludmila N. Gömze

Research output: Contribution to journal › Conference article › peer-review

6 Scopus citations

Abstract

Based on conventional kaolinite and IG-017 bio-original additives of IGREX Ltd. the authors have developed new ceramic composite materials for different industrial purposes. In this work, different powder mixtures of kaolinite and IG-017 bio-original additive were milled and uniaxially pressed at different compaction pressures into cylindrical discs, after compaction, the discs were sintered in electric kiln under oxidation atmosphere and in oxygen-free atmosphere. Using the oxygen-free sintering process, new high porosity ceramic materials were created. Through the examination of the microstructure of the produced specimens the authors have found that the ceramic structure is reinforced with carbon nanofibers.

Original language	English
Article number	012025
Journal	IOP Conference Series: Materials Science and Engineering
Volume	613
Issue number	1
DOIs	https://doi.org/10.1088/1757-899X/613/1/012025
State	Published - 4 Nov 2019
Externally published	Yes

Bibliographical note

Publisher Copyright:
© 2019 IOP Publishing Ltd. All rights reserved.

ASJC Scopus subject areas

General Materials Science
General Engineering

Access to Document

10.1088/1757-899X/613/1/012025

Cite this

@article{a7759c87b7114871a299e85425498061,

title = "Effect of composition and heat treatment on porosity and microstructures of technical ceramics made from kaolin and IG-017 additive",

abstract = "Based on conventional kaolinite and IG-017 bio-original additives of IGREX Ltd. the authors have developed new ceramic composite materials for different industrial purposes. In this work, different powder mixtures of kaolinite and IG-017 bio-original additive were milled and uniaxially pressed at different compaction pressures into cylindrical discs, after compaction, the discs were sintered in electric kiln under oxidation atmosphere and in oxygen-free atmosphere. Using the oxygen-free sintering process, new high porosity ceramic materials were created. Through the examination of the microstructure of the produced specimens the authors have found that the ceramic structure is reinforced with carbon nanofibers.",

author = "Emese Kurovics and G{\"o}mze, \{L{\'a}szl{\'o} A.\} and Ibrahim, \{Jamal Eldin F.M.\} and G{\"o}mze, \{Ludmila N.\}",

year = "2019",

month = nov,

day = "4",

doi = "10.1088/1757-899X/613/1/012025",

language = "English",

volume = "613",

journal = "IOP Conference Series: Materials Science and Engineering",

issn = "1757-8981",

publisher = "Institute of Physics",

number = "1",

}

Effect of composition and heat treatment on porosity and microstructures of technical ceramics made from kaolin and IG-017 additive. / Kurovics, Emese; Gömze, László A.; Ibrahim, Jamal Eldin F.M. et al.
In: IOP Conference Series: Materials Science and Engineering, Vol. 613, No. 1, 012025, 04.11.2019.

Research output: Contribution to journal › Conference article › peer-review

TY - JOUR

T1 - Effect of composition and heat treatment on porosity and microstructures of technical ceramics made from kaolin and IG-017 additive

AU - Kurovics, Emese

AU - Gömze, László A.

AU - Ibrahim, Jamal Eldin F.M.

AU - Gömze, Ludmila N.

PY - 2019/11/4

Y1 - 2019/11/4

N2 - Based on conventional kaolinite and IG-017 bio-original additives of IGREX Ltd. the authors have developed new ceramic composite materials for different industrial purposes. In this work, different powder mixtures of kaolinite and IG-017 bio-original additive were milled and uniaxially pressed at different compaction pressures into cylindrical discs, after compaction, the discs were sintered in electric kiln under oxidation atmosphere and in oxygen-free atmosphere. Using the oxygen-free sintering process, new high porosity ceramic materials were created. Through the examination of the microstructure of the produced specimens the authors have found that the ceramic structure is reinforced with carbon nanofibers.

AB - Based on conventional kaolinite and IG-017 bio-original additives of IGREX Ltd. the authors have developed new ceramic composite materials for different industrial purposes. In this work, different powder mixtures of kaolinite and IG-017 bio-original additive were milled and uniaxially pressed at different compaction pressures into cylindrical discs, after compaction, the discs were sintered in electric kiln under oxidation atmosphere and in oxygen-free atmosphere. Using the oxygen-free sintering process, new high porosity ceramic materials were created. Through the examination of the microstructure of the produced specimens the authors have found that the ceramic structure is reinforced with carbon nanofibers.

UR - https://www.scopus.com/pages/publications/85075100562

U2 - 10.1088/1757-899X/613/1/012025

DO - 10.1088/1757-899X/613/1/012025

M3 - Conference article

AN - SCOPUS:85075100562

SN - 1757-8981

VL - 613

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

IS - 1

M1 - 012025

ER -

Effect of composition and heat treatment on porosity and microstructures of technical ceramics made from kaolin and IG-017 additive

Abstract

Bibliographical note

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this