Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories

Tariku Sinshaw Tamir; Gang Xiong; Hiruy Mulugeta Menkir; Xiuqin Shang; Zhen Shen; Xisong Dong; Xiaoyan Gong

doi:10.1109/CASE48305.2020.9217002

Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories

Tariku Sinshaw Tamir
, Gang Xiong
, Hiruy Mulugeta Menkir
, Xiuqin Shang
, Zhen Shen
, Xisong Dong
, Xiaoyan Gong^*

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

13 Scopus citations

Abstract

The SCADA system, which means Supervisory Control and Data Acquisition systems, are widely used in automatic management and control of producing and manufacturing processes throughout the world, reducing manpower and improving production efficiency. However, in Ethiopia, the manufacturing sector is at its infant stage and manual systems are mostly applied in existing factories. Therefore, in this paper we design a monitoring system based on existing SCADA system only in English and develops HMI software with GUI representing sub components to enable computerized controlling and monitoring of different parts in factories both in English and Amharic. Simulation results show interactions among sensors, actuators, SCADA hardware and HMI software in the overall system and real time data can be transferred and stored in databases. Finally, it is observed from PI controllers that tanker's level can reach its steady state value after 0.15 seconds.

Original language	English
Title of host publication	2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020
Publisher	IEEE Computer Society
Pages	691-696
Number of pages	6
ISBN (Electronic)	9781728169040
DOIs	https://doi.org/10.1109/CASE48305.2020.9217002
State	Published - Aug 2020
Externally published	Yes
Event	16th IEEE International Conference on Automation Science and Engineering, CASE 2020 - Hong Kong, Hong Kong Duration: 20 Aug 2020 → 21 Aug 2020

Publication series

Name	IEEE International Conference on Automation Science and Engineering
Volume	2020-August
ISSN (Print)	2161-8070
ISSN (Electronic)	2161-8089

Conference

Conference	16th IEEE International Conference on Automation Science and Engineering, CASE 2020
Country/Territory	Hong Kong
City	Hong Kong
Period	20/08/20 → 21/08/20

Bibliographical note

Publisher Copyright:
© 2020 IEEE.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

GUI
HMI
PI controller
SCADA systems
database

ASJC Scopus subject areas

Control and Systems Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/CASE48305.2020.9217002

Cite this

Tamir, T. S., Xiong, G., Menkir, H. M., Shang, X., Shen, Z., Dong, X., & Gong, X. (2020). Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories. In 2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020 (pp. 691-696). Article 9217002 (IEEE International Conference on Automation Science and Engineering; Vol. 2020-August). IEEE Computer Society. https://doi.org/10.1109/CASE48305.2020.9217002

@inproceedings{aa171c6c11db4782ab1fb5c18115173c,

title = "Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories",

abstract = "The SCADA system, which means Supervisory Control and Data Acquisition systems, are widely used in automatic management and control of producing and manufacturing processes throughout the world, reducing manpower and improving production efficiency. However, in Ethiopia, the manufacturing sector is at its infant stage and manual systems are mostly applied in existing factories. Therefore, in this paper we design a monitoring system based on existing SCADA system only in English and develops HMI software with GUI representing sub components to enable computerized controlling and monitoring of different parts in factories both in English and Amharic. Simulation results show interactions among sensors, actuators, SCADA hardware and HMI software in the overall system and real time data can be transferred and stored in databases. Finally, it is observed from PI controllers that tanker's level can reach its steady state value after 0.15 seconds.",

keywords = "GUI, HMI, PI controller, SCADA systems, database",

author = "Tamir, \{Tariku Sinshaw\} and Gang Xiong and Menkir, \{Hiruy Mulugeta\} and Xiuqin Shang and Zhen Shen and Xisong Dong and Xiaoyan Gong",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 16th IEEE International Conference on Automation Science and Engineering, CASE 2020 ; Conference date: 20-08-2020 Through 21-08-2020",

year = "2020",

month = aug,

doi = "10.1109/CASE48305.2020.9217002",

language = "English",

series = "IEEE International Conference on Automation Science and Engineering",

publisher = "IEEE Computer Society",

pages = "691--696",

booktitle = "2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020",

address = "United States",

}

Tamir, TS, Xiong, G, Menkir, HM, Shang, X, Shen, Z, Dong, X & Gong, X 2020, Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories. in 2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020., 9217002, IEEE International Conference on Automation Science and Engineering, vol. 2020-August, IEEE Computer Society, pp. 691-696, 16th IEEE International Conference on Automation Science and Engineering, CASE 2020, Hong Kong, Hong Kong, 20/08/20. https://doi.org/10.1109/CASE48305.2020.9217002

Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories. / Tamir, Tariku Sinshaw; Xiong, Gang; Menkir, Hiruy Mulugeta et al.
2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020. IEEE Computer Society, 2020. p. 691-696 9217002 (IEEE International Conference on Automation Science and Engineering; Vol. 2020-August).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories

AU - Tamir, Tariku Sinshaw

AU - Xiong, Gang

AU - Menkir, Hiruy Mulugeta

AU - Shang, Xiuqin

AU - Shen, Zhen

AU - Dong, Xisong

AU - Gong, Xiaoyan

PY - 2020/8

Y1 - 2020/8

N2 - The SCADA system, which means Supervisory Control and Data Acquisition systems, are widely used in automatic management and control of producing and manufacturing processes throughout the world, reducing manpower and improving production efficiency. However, in Ethiopia, the manufacturing sector is at its infant stage and manual systems are mostly applied in existing factories. Therefore, in this paper we design a monitoring system based on existing SCADA system only in English and develops HMI software with GUI representing sub components to enable computerized controlling and monitoring of different parts in factories both in English and Amharic. Simulation results show interactions among sensors, actuators, SCADA hardware and HMI software in the overall system and real time data can be transferred and stored in databases. Finally, it is observed from PI controllers that tanker's level can reach its steady state value after 0.15 seconds.

AB - The SCADA system, which means Supervisory Control and Data Acquisition systems, are widely used in automatic management and control of producing and manufacturing processes throughout the world, reducing manpower and improving production efficiency. However, in Ethiopia, the manufacturing sector is at its infant stage and manual systems are mostly applied in existing factories. Therefore, in this paper we design a monitoring system based on existing SCADA system only in English and develops HMI software with GUI representing sub components to enable computerized controlling and monitoring of different parts in factories both in English and Amharic. Simulation results show interactions among sensors, actuators, SCADA hardware and HMI software in the overall system and real time data can be transferred and stored in databases. Finally, it is observed from PI controllers that tanker's level can reach its steady state value after 0.15 seconds.

KW - GUI

KW - HMI

KW - PI controller

KW - SCADA systems

KW - database

UR - https://www.scopus.com/pages/publications/85094130147

U2 - 10.1109/CASE48305.2020.9217002

DO - 10.1109/CASE48305.2020.9217002

M3 - Conference contribution

AN - SCOPUS:85094130147

T3 - IEEE International Conference on Automation Science and Engineering

SP - 691

EP - 696

BT - 2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020

PB - IEEE Computer Society

T2 - 16th IEEE International Conference on Automation Science and Engineering, CASE 2020

Y2 - 20 August 2020 through 21 August 2020

ER -

Tamir TS, Xiong G, Menkir HM, Shang X, Shen Z, Dong X et al. Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories. In 2020 IEEE 16th International Conference on Automation Science and Engineering, CASE 2020. IEEE Computer Society. 2020. p. 691-696. 9217002. (IEEE International Conference on Automation Science and Engineering). doi: 10.1109/CASE48305.2020.9217002

Developing SCADA Systems to Monitor and Control Liquid and Detergent Factories

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this