Design of a peripheral interface controller based MPPT charge controller

Md Rokonuzzaman; Md Hossam-E-Haider

doi:10.1109/ICECTE.2016.7879638

Design of a peripheral interface controller based MPPT charge controller

Md Rokonuzzaman
, Md Hossam-E-Haider

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99% is recorded within the cost of BDT 2050 taka only.

Original language	English
Title of host publication	ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781509057856
DOIs	https://doi.org/10.1109/ICECTE.2016.7879638
State	Published - 15 Mar 2017
Externally published	Yes
Event	2nd International Conference on Electrical, Computer and Telecommunication Engineering, ICECTE 2016 - Rajshahi, Bangladesh Duration: 8 Dec 2016 → 10 Dec 2016

Publication series

Name	ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering

Conference

Conference	2nd International Conference on Electrical, Computer and Telecommunication Engineering, ICECTE 2016
Country/Territory	Bangladesh
City	Rajshahi
Period	8/12/16 → 10/12/16

Bibliographical note

Publisher Copyright:
© 2016 IEEE.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

MPPT technique
P & O algorithm
PIC microcontroller
Smart charge controller (SCC)

ASJC Scopus subject areas

Renewable Energy, Sustainability and the Environment
Biomedical Engineering
Electrical and Electronic Engineering
Instrumentation
Artificial Intelligence
Computer Networks and Communications
Hardware and Architecture
Energy Engineering and Power Technology

Access to Document

10.1109/ICECTE.2016.7879638

Cite this

Rokonuzzaman, M., & Hossam-E-Haider, M. (2017). Design of a peripheral interface controller based MPPT charge controller. In ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering Article 7879638 (ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICECTE.2016.7879638

Rokonuzzaman, Md ; Hossam-E-Haider, Md. / Design of a peripheral interface controller based MPPT charge controller. ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering. Institute of Electrical and Electronics Engineers Inc., 2017. (ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering).

@inproceedings{3743063d92d74d63a222a01c54e1e93d,

title = "Design of a peripheral interface controller based MPPT charge controller",

abstract = "This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P\&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99\% is recorded within the cost of BDT 2050 taka only.",

keywords = "MPPT technique, P \& O algorithm, PIC microcontroller, Smart charge controller (SCC)",

author = "Md Rokonuzzaman and Md Hossam-E-Haider",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2nd International Conference on Electrical, Computer and Telecommunication Engineering, ICECTE 2016 ; Conference date: 08-12-2016 Through 10-12-2016",

year = "2017",

month = mar,

day = "15",

doi = "10.1109/ICECTE.2016.7879638",

language = "English",

series = "ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering",

address = "United States",

}

Rokonuzzaman, M & Hossam-E-Haider, M 2017, Design of a peripheral interface controller based MPPT charge controller. in ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering., 7879638, ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering, Institute of Electrical and Electronics Engineers Inc., 2nd International Conference on Electrical, Computer and Telecommunication Engineering, ICECTE 2016, Rajshahi, Bangladesh, 8/12/16. https://doi.org/10.1109/ICECTE.2016.7879638

Design of a peripheral interface controller based MPPT charge controller. / Rokonuzzaman, Md; Hossam-E-Haider, Md.
ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering. Institute of Electrical and Electronics Engineers Inc., 2017. 7879638 (ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design of a peripheral interface controller based MPPT charge controller

AU - Rokonuzzaman, Md

AU - Hossam-E-Haider, Md

PY - 2017/3/15

Y1 - 2017/3/15

N2 - This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99% is recorded within the cost of BDT 2050 taka only.

AB - This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99% is recorded within the cost of BDT 2050 taka only.

KW - MPPT technique

KW - P & O algorithm

KW - PIC microcontroller

KW - Smart charge controller (SCC)

UR - https://www.scopus.com/pages/publications/85017318510

U2 - 10.1109/ICECTE.2016.7879638

DO - 10.1109/ICECTE.2016.7879638

M3 - Conference contribution

AN - SCOPUS:85017318510

T3 - ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering

BT - ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering, ICECTE 2016

Y2 - 8 December 2016 through 10 December 2016

ER -

Rokonuzzaman M, Hossam-E-Haider M. Design of a peripheral interface controller based MPPT charge controller. In ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering. Institute of Electrical and Electronics Engineers Inc. 2017. 7879638. (ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering). doi: 10.1109/ICECTE.2016.7879638

Design of a peripheral interface controller based MPPT charge controller

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this