Design and Experimental Verification of a Laser Engraving Machine

Malik Shahaan Khalid; Syed Muhammad Jaleed; Arslan Zafar; Sohaib Ali Khan; Hafiz Zia Ur Rehman; Zeashan Hameed Khan

doi:10.1109/ICEPT58859.2023.10152428

Design and Experimental Verification of a Laser Engraving Machine

Malik Shahaan Khalid
, Syed Muhammad Jaleed
, Arslan Zafar
, Sohaib Ali Khan
, Hafiz Zia Ur Rehman
, Zeashan Hameed Khan

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

This paper aims to develop a low-cost laser engraving machine. Materials like plastics, acrylic, glass, wood, cardboard, and leather have been used to engrave desired inputs. It have been found that this laser engraving process has a higher precision and accuracy as compared to traditional embellishing and embossing. The laser beam acquires thermal energy, which emerges from the machine and engraves the material. CREO 2.0 software is used for the 3D modeling and simulation of the machine. Arduino and different controller boards are tried and used in assembling the machine in less time. Different dependency and dimensional tests are conducted in order to validate the machine. The results are found to be satisfactory in terms of quality and cost. The final assembly is experimentally verified which is based on a 2D gantry that is mounted with a laser LED payload for laser engraving on various compatible materials.

Original language	English
Title of host publication	2023 International Conference on Emerging Power Technologies, ICEPT 2023
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9798350301014
DOIs	https://doi.org/10.1109/ICEPT58859.2023.10152428
State	Published - 2023
Externally published	Yes
Event	2023 International Conference on Emerging Power Technologies, ICEPT 2023 - Topi, Pakistan Duration: 6 May 2023 → 7 May 2023

Publication series

Name	2023 International Conference on Emerging Power Technologies, ICEPT 2023

Conference

Conference	2023 International Conference on Emerging Power Technologies, ICEPT 2023
Country/Territory	Pakistan
City	Topi
Period	6/05/23 → 7/05/23

Bibliographical note

Publisher Copyright:
© 2023 IEEE.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

gantry robot
laser engraving
machine design
subtractive manufacturing

ASJC Scopus subject areas

Electrical and Electronic Engineering
Computer Networks and Communications
Energy Engineering and Power Technology
Renewable Energy, Sustainability and the Environment
Control and Optimization
Instrumentation

Access to Document

10.1109/ICEPT58859.2023.10152428

Cite this

Khalid, M. S., Jaleed, S. M., Zafar, A., Khan, S. A., Ur Rehman, H. Z., & Khan, Z. H. (2023). Design and Experimental Verification of a Laser Engraving Machine. In 2023 International Conference on Emerging Power Technologies, ICEPT 2023 (2023 International Conference on Emerging Power Technologies, ICEPT 2023). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEPT58859.2023.10152428

@inproceedings{4bb8957ff4614662999a357e85cb8d06,

title = "Design and Experimental Verification of a Laser Engraving Machine",

abstract = "This paper aims to develop a low-cost laser engraving machine. Materials like plastics, acrylic, glass, wood, cardboard, and leather have been used to engrave desired inputs. It have been found that this laser engraving process has a higher precision and accuracy as compared to traditional embellishing and embossing. The laser beam acquires thermal energy, which emerges from the machine and engraves the material. CREO 2.0 software is used for the 3D modeling and simulation of the machine. Arduino and different controller boards are tried and used in assembling the machine in less time. Different dependency and dimensional tests are conducted in order to validate the machine. The results are found to be satisfactory in terms of quality and cost. The final assembly is experimentally verified which is based on a 2D gantry that is mounted with a laser LED payload for laser engraving on various compatible materials.",

keywords = "gantry robot, laser engraving, machine design, subtractive manufacturing",

author = "Khalid, \{Malik Shahaan\} and Jaleed, \{Syed Muhammad\} and Arslan Zafar and Khan, \{Sohaib Ali\} and \{Ur Rehman\}, \{Hafiz Zia\} and Khan, \{Zeashan Hameed\}",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 2023 International Conference on Emerging Power Technologies, ICEPT 2023 ; Conference date: 06-05-2023 Through 07-05-2023",

year = "2023",

doi = "10.1109/ICEPT58859.2023.10152428",

language = "English",

series = "2023 International Conference on Emerging Power Technologies, ICEPT 2023",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2023 International Conference on Emerging Power Technologies, ICEPT 2023",

address = "United States",

}

Khalid, MS, Jaleed, SM, Zafar, A, Khan, SA, Ur Rehman, HZ & Khan, ZH 2023, Design and Experimental Verification of a Laser Engraving Machine. in 2023 International Conference on Emerging Power Technologies, ICEPT 2023. 2023 International Conference on Emerging Power Technologies, ICEPT 2023, Institute of Electrical and Electronics Engineers Inc., 2023 International Conference on Emerging Power Technologies, ICEPT 2023, Topi, Pakistan, 6/05/23. https://doi.org/10.1109/ICEPT58859.2023.10152428

Design and Experimental Verification of a Laser Engraving Machine. / Khalid, Malik Shahaan; Jaleed, Syed Muhammad; Zafar, Arslan et al.
2023 International Conference on Emerging Power Technologies, ICEPT 2023. Institute of Electrical and Electronics Engineers Inc., 2023. (2023 International Conference on Emerging Power Technologies, ICEPT 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and Experimental Verification of a Laser Engraving Machine

AU - Khalid, Malik Shahaan

AU - Jaleed, Syed Muhammad

AU - Zafar, Arslan

AU - Khan, Sohaib Ali

AU - Ur Rehman, Hafiz Zia

AU - Khan, Zeashan Hameed

PY - 2023

Y1 - 2023

N2 - This paper aims to develop a low-cost laser engraving machine. Materials like plastics, acrylic, glass, wood, cardboard, and leather have been used to engrave desired inputs. It have been found that this laser engraving process has a higher precision and accuracy as compared to traditional embellishing and embossing. The laser beam acquires thermal energy, which emerges from the machine and engraves the material. CREO 2.0 software is used for the 3D modeling and simulation of the machine. Arduino and different controller boards are tried and used in assembling the machine in less time. Different dependency and dimensional tests are conducted in order to validate the machine. The results are found to be satisfactory in terms of quality and cost. The final assembly is experimentally verified which is based on a 2D gantry that is mounted with a laser LED payload for laser engraving on various compatible materials.

AB - This paper aims to develop a low-cost laser engraving machine. Materials like plastics, acrylic, glass, wood, cardboard, and leather have been used to engrave desired inputs. It have been found that this laser engraving process has a higher precision and accuracy as compared to traditional embellishing and embossing. The laser beam acquires thermal energy, which emerges from the machine and engraves the material. CREO 2.0 software is used for the 3D modeling and simulation of the machine. Arduino and different controller boards are tried and used in assembling the machine in less time. Different dependency and dimensional tests are conducted in order to validate the machine. The results are found to be satisfactory in terms of quality and cost. The final assembly is experimentally verified which is based on a 2D gantry that is mounted with a laser LED payload for laser engraving on various compatible materials.

KW - gantry robot

KW - laser engraving

KW - machine design

KW - subtractive manufacturing

UR - https://www.scopus.com/pages/publications/85164536087

U2 - 10.1109/ICEPT58859.2023.10152428

DO - 10.1109/ICEPT58859.2023.10152428

M3 - Conference contribution

AN - SCOPUS:85164536087

T3 - 2023 International Conference on Emerging Power Technologies, ICEPT 2023

BT - 2023 International Conference on Emerging Power Technologies, ICEPT 2023

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2023 International Conference on Emerging Power Technologies, ICEPT 2023

Y2 - 6 May 2023 through 7 May 2023

ER -

Khalid MS, Jaleed SM, Zafar A, Khan SA, Ur Rehman HZ, Khan ZH. Design and Experimental Verification of a Laser Engraving Machine. In 2023 International Conference on Emerging Power Technologies, ICEPT 2023. Institute of Electrical and Electronics Engineers Inc. 2023. (2023 International Conference on Emerging Power Technologies, ICEPT 2023). doi: 10.1109/ICEPT58859.2023.10152428

Design and Experimental Verification of a Laser Engraving Machine

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this