Compaction and sintering behaviour of A356-fly ash composites: A preliminary investigation

In the present study, A356-fly ash metal matrix composites were developed through powder metallurgy route. The composites were mixed by using the ball milling technique, shaped through uniaxial and cold isostatic compaction, and then sintered at 520°C. Scanning electron microscopy and X-ray diffraction were used for microstructure and phase characterisation. The density and microhardness of the composites were evaluated as a function of fly ash content, compaction pressure, sintering time and age hardening time. Uniaxial cold compaction of the composites increased their green density and cold isostatic compaction of the compacts led to a further increase in the density. At a constant compaction pressure, the density decreased with increasing fly ash content, resulting in light weight composites. The microhardness of the composites increased with the addition of 10 wt-% fly ash while it decreased with the addition of 20 and 30 wt-% fly ash. Sintering at 520°C increased the density of the composites and the grain size of the α-Al phase of the matrix. The matrix alloy and the composite containing 10 wt-% fly ash showed some response to age hardening at 160°C. However, no response to age hardening was observed at 200°C.