Abstract
Results from a study on the effect of cathodic protection (CP) current on the enhancement of alkali-silica reaction are presented in this paper. Steel embedded in mortar specimens made of high alkali cement and reactive crushed Pyrex glass were subjected to 215 and 1076 ma/m2 (20 and 100 ma/ft2) cathodic protection current at the steel surface. CP current densities of 215 and 1076 ma/m2 (based on the reinforcing steel surface area) advanced the cracking time by 40 and 60 percent, respectively, compared to cracking time in specimens which were not current treated. 34 and 15 percent reductions in compressive strength due to increased alkali-silica reaction occurred when the specimens were exposed to 1076 and 215 ma/m2, respectively, for 80 days. Hardness of mortar adjacent to the steel is reduced with increase in current densities at the steel surface. CP current has no effect on the tensile strength and ductility of low strength reinforcing steel in concrete. Results obtained from a simple staining technique suggested the formation of higher alkali-silica gel contents near the steel at a higher current density.
| Original language | English |
|---|---|
| Pages (from-to) | 247-252 |
| Number of pages | 6 |
| Journal | ACI Materials Journal |
| Volume | 90 |
| Issue number | 3 |
| State | Published - May 1993 |
ASJC Scopus subject areas
- Civil and Structural Engineering
- Building and Construction
- General Materials Science