Skip to main navigation Skip to search Skip to main content

Broadband and low-light photodetection in a flexible 2D Ti3C2Tx MXene/1D-SbSI nanowire heterojunction photodetector

  • Muhammad Zubair Nawaz*
  • , Waqas Ahmad
  • , Umer Younis
  • , Asad Khaleeq
  • , Waqar ul Hasan
  • , Rana Zafar Abbas Manj
  • , Muhammad Shahrukh Saleem
  • , Inaam Ullah
  • , Ayesha Irfan
  • , Israr Masood ul Hasan
  • , Muhammad Yaqub
  • , HM Noor ul Huda Khan Asghar
  • , Gul Naz
  • , Mai Li
  • , Chunrui Wang
  • , Yury Illarionov
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

32 Scopus citations

Abstract

Detection of weak signals is a critical challenge for advanced applications in biomedical imaging, wearable electronics and autonomous vehicles. The efficacy of photodetectors in low light conditions is profoundly influenced by the minimization of noise current. To address this, we present a self-powered flexible photodiode (SFD) based on a Ti3C2Tx MXene/SbSI van der Waals heterojunction (vdWH). This architecture amplifies photocurrent generation while reducing noise. The vdWH interface inherent built in electric field facilitates rapid photogenerated carrier separation, achieving a responsivity of 880 mA/W together with fast response (6.8 ms/13.2 ms). With an ultra-low noise equivalent power (NEP) of ≈10⁻¹⁶ W/Hz1/2, the SFD is capable of detecting faint light signals. The SFD also enables precise heart rate monitoring via photoplethysmography (PPG) signals, offering a self-powered and non-invasive solution for early cardiovascular disease detection. This study establishes a foundation for the advancement of high-performance, MXene-based SFD architecture specifically for wearable health monitoring applications.

Original languageEnglish
Article number113648
JournalMaterials Research Bulletin
Volume193
DOIs
StatePublished - Jan 2026
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2025

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 3 - Good Health and Well-being
    SDG 3 Good Health and Well-being

Keywords

  • 1D SbSI
  • 2D TiCT MXene
  • Flexible photodetectors
  • Heterojunction
  • PPG signals
  • Self-powered
  • Wearable health monitoring

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Broadband and low-light photodetection in a flexible 2D Ti3C2Tx MXene/1D-SbSI nanowire heterojunction photodetector'. Together they form a unique fingerprint.

Cite this