Barite–Micromax mixture, an enhanced weighting agent for the elimination of barite sag in invert emulsion drilling fluids

Weighting agents are mixed with the drilling mud to provide the high density required to control high-pressure high-temperature (HPHT) wells throughout the drilling operation. Solids sag occurs when the weighting agent separates from the liquid phase and settles down, causing variations in the drilling fluid density. This study evaluates barite–manganese tetroxide (Micromax) mixture to eliminate solids sag issue encountered with weighted invert emulsion drilling fluids at HPHT conditions. Micromax additive was added to barite-weighted fluids in different concentrations, 0, 15, and 30 wt% of the total weighting agent. Static and dynamic sag tests were used to evaluate the sag tendency of the new formulation under static and dynamic conditions. The performance of the new formulation was evaluated by measuring the electrical stability, density, rheological, viscoelastic, and filtration properties of the drilling fluid. The obtained results showed that Micromax additive improves drilling fluid stability by reducing the sag tendency. Adding only 30 wt% of Micromax additive eliminated barite sag issue in both dynamic and static conditions at 350 °F. 30 wt% Micromax increased the base fluid density by 5.4% and the yield point by 115% and maintained the gel strength value at 12 lb/100 ft², while it reduced the plastic viscosity by 30%. The addition of Micromax additive improved the viscoelastic properties of the drilling fluid by maintaining a higher storage modulus to the loss modulus ratio when compared with the barite sample (in the range 4–4.5). Furthermore, 30 wt% Micromax improved the filtration performance by reducing the filtrate volume, filter cake weight, and filter cake thickness by 50%.