Abstract
In this paper, the problem of air cooling and temperature nonuniformity at the cell and pack level is addressed. Passive techniques are developed by integrating jet inlets and vortex generators (VGs) in a simple battery pack with the goal to achieve an effective cooling, and the desired temperature uniformity at the cell and pack level to less than 5 °C, without an increase in the required mass flow and power requirements. Moreover, various configurations of the developed techniques are assessed and compared. In order to achieve the objectives, computational fluid dynamics (CFD) is used to conduct numerical studies on the battery packs. The results concluded that by adding both the delta winglet (DW) vortex generator arrays and jet inlet arrays in the same configuration, improvements in temperature reduction and uniformity can be achieved. The results showed that the maximum temperature of the battery pack was reduced by ~6% and the temperature uniformity at the pack level was increased by 24%. Additionally, a ~37% improvement in the temperature uniformity at cell level was achieved.
| Original language | English |
|---|---|
| Article number | 021005 |
| Journal | Journal of Thermal Science and Engineering Applications |
| Volume | 11 |
| Issue number | 2 |
| DOIs | |
| State | Published - 1 Apr 2019 |
| Externally published | Yes |
Bibliographical note
Publisher Copyright:© 2019 by ASME.
Keywords
- Battery thermal management
- Computational fluid dynamics (CFD) analysis
- Forced air passive cooling
- Vortex generator
ASJC Scopus subject areas
- General Materials Science
- Condensed Matter Physics
- General Engineering
- Fluid Flow and Transfer Processes
Fingerprint
Dive into the research topics of 'Application of jets and vortex generators to improve air- cooling and temperature uniformity in a simple battery pack'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver