Application of insulators in a contaminated environment

doi:10.1109/TPAS.1979.319486

Application of insulators in a contaminated environment

King Fahd University of Petroleum & Minerals

Research output: Contribution to journal › Article › peer-review

56 Scopus citations

Abstract

The application and maintenance of outdoor ceramic insulation on overhead transmission systems has been an art learned by experience. This document combines the experiences of electric utilities, manufacturers, and research laboratories into a single comprehensive report on the design and maintenance of transmission insulation in a contaminated environment. It is intended as a practical reference and guideline to be used by all electric utility engineers and operating personnel. The reader will find a short description of contamination flashover, followed by detailed sections on site severity measurement, test procedures, design practices and maintenance practices. The emphasis in this report is on power frequency voltages, but some occasional references to overvoltages and dc are also made.

Original language	English
Pages (from-to)	1676-1695
Number of pages	20
Journal	IEEE Transactions on Power Apparatus and Systems
Volume	PAS-98
Issue number	5
DOIs	https://doi.org/10.1109/TPAS.1979.319486
State	Published - 1979

ASJC Scopus subject areas

Energy Engineering and Power Technology
General Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/TPAS.1979.319486

Cite this

@article{8649048551bc41a4b72810248bc74595,

title = "Application of insulators in a contaminated environment",

abstract = "The application and maintenance of outdoor ceramic insulation on overhead transmission systems has been an art learned by experience. This document combines the experiences of electric utilities, manufacturers, and research laboratories into a single comprehensive report on the design and maintenance of transmission insulation in a contaminated environment. It is intended as a practical reference and guideline to be used by all electric utility engineers and operating personnel. The reader will find a short description of contamination flashover, followed by detailed sections on site severity measurement, test procedures, design practices and maintenance practices. The emphasis in this report is on power frequency voltages, but some occasional references to overvoltages and dc are also made.",

author = "Holte, \{K. C.\} and Alexander, \{D. E.\} and Baker, \{D. M.\} and Brown, \{R. L.\} and Bruning, \{A. M.\} and Cheng, \{T. C.\} and Couquelet, \{F. M.\} and Dakin, \{T. W.\} and I. Kimoto and T. Hillesland and Jolly, \{D. C.\} and G. Karady and Kingsbury, \{B. E.\} and Low, \{S. S.\} and Mak, \{S. T.\} and Massey, \{J. R.\} and Moran, \{J. H.\} and O. Nigol and J. Sakich and Schneider, \{H. M.\} and M. Sforzini and H. Songster",

year = "1979",

doi = "10.1109/TPAS.1979.319486",

language = "English",

volume = "PAS-98",

pages = "1676--1695",

journal = "IEEE Transactions on Power Apparatus and Systems",

issn = "0018-9510",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "5",

}

TY - JOUR

T1 - Application of insulators in a contaminated environment

AU - Holte, K. C.

AU - Alexander, D. E.

AU - Baker, D. M.

AU - Brown, R. L.

AU - Bruning, A. M.

AU - Cheng, T. C.

AU - Couquelet, F. M.

AU - Dakin, T. W.

AU - Kimoto, I.

AU - Hillesland, T.

AU - Jolly, D. C.

AU - Karady, G.

AU - Kingsbury, B. E.

AU - Low, S. S.

AU - Mak, S. T.

AU - Massey, J. R.

AU - Moran, J. H.

AU - Nigol, O.

AU - Sakich, J.

AU - Schneider, H. M.

AU - Sforzini, M.

AU - Songster, H.

PY - 1979

Y1 - 1979

N2 - The application and maintenance of outdoor ceramic insulation on overhead transmission systems has been an art learned by experience. This document combines the experiences of electric utilities, manufacturers, and research laboratories into a single comprehensive report on the design and maintenance of transmission insulation in a contaminated environment. It is intended as a practical reference and guideline to be used by all electric utility engineers and operating personnel. The reader will find a short description of contamination flashover, followed by detailed sections on site severity measurement, test procedures, design practices and maintenance practices. The emphasis in this report is on power frequency voltages, but some occasional references to overvoltages and dc are also made.

AB - The application and maintenance of outdoor ceramic insulation on overhead transmission systems has been an art learned by experience. This document combines the experiences of electric utilities, manufacturers, and research laboratories into a single comprehensive report on the design and maintenance of transmission insulation in a contaminated environment. It is intended as a practical reference and guideline to be used by all electric utility engineers and operating personnel. The reader will find a short description of contamination flashover, followed by detailed sections on site severity measurement, test procedures, design practices and maintenance practices. The emphasis in this report is on power frequency voltages, but some occasional references to overvoltages and dc are also made.

UR - https://www.scopus.com/pages/publications/0018517832

U2 - 10.1109/TPAS.1979.319486

DO - 10.1109/TPAS.1979.319486

M3 - Article

AN - SCOPUS:0018517832

SN - 0018-9510

VL - PAS-98

SP - 1676

EP - 1695

JO - IEEE Transactions on Power Apparatus and Systems

JF - IEEE Transactions on Power Apparatus and Systems

IS - 5

ER -

Application of insulators in a contaminated environment

Abstract

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this