An experimental investigation of a water desalination unit using different microparticle-coated absorber plate: yield, thermal, economic, and environmental assessments

This study aims to augment the performance of a solar desalination unit. To experimental examine this idea, a modified solar still with three different microparticles doped in black paint-coated absorber were designed, fabricated, and tested in Jaipur, India. Three different microparticles such as copper, aluminum, and tin with particle size of 50–80 μm with weight concentration of 10% were doped in black paint and then coated on the absorber of solar still. The coated absorber of solar still were compared with the conventional solar still without any microparticle coating to obtain the effect of different coating materials on the water productivity, thermal performance, economic, and environment-economics analysis of solar still. The result showed that under the water depth of 1 cm, coating of copper, aluminum, and tin on absorber augmented the full-day water yield by 33.13, 22.18, and 11.53%, compared to conventional solar still without any coating. In addition, full-day energy and exergy efficiency of solar still with copper-coated absorber exhibited maximum values compared to all other solar stills, owing to the higher thermal conductivity and excellent solar-thermal conversion behaviors of copper. The cost of water per liter estimated through economic analysis was found to be US $ 0.0074 for conventional solar still, which was significantly reduced to US $ 0.0066 in the case of solar still with copper-coated absorber along with the payback time of 2.7 months. The environment-economic assessment estimated that solar still with copper-coated absorber plate has reduced the 13.19 tons of CO₂ emission. It is concluded that augmented heat transfer rate from water basin to inner glass surface through utilization of microparticle coating would pave a pathway to develop energy-efficient low-cost solar-based desalination system.