Skip to main navigation Skip to search Skip to main content

Advanced study of pore structure and mechanical property change of tight sand due to thermochemical treatment

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

The demand for unconventional gas is rapidly increasing to provide enough energy to maintain sustainable growth for industrial countries. Even oil producers can develop UG to be directed to internal industrial and power consumptions. As Unconventional gas reservoirs are located in deep high-stress formations, one of the critical challenges gas producers are facing is to develop a cost effective stimulation method that can reduce production cost to lower than Break-even. In this paper a novel stimulation method, based on thermochemicals, is introduced. Thermochemicals when injected in tight reservoirs generate localized pressure-pulses, which result in creating microfractures, improve permeability and increase stimulated reservoir volume (SRV). Tight core samples were treated with thermochemicals and the impact on mechanical properties were studied. Generated localized pressure was clearly detected during Coreflood treatment. Microstructural and mineralogical properties were also investigated using microscopy and spectroscopy. CT-scan, micro CT-Scan, Young's modulus, Poisson's ratio and ultrasonic velocities were measured pre and post treatment. Results showed creation of fractures and microfractures, which resulted in improved rock conductivity. Results show that, micro-factures are created inside the used sample due to the in-situ generation of heat and pressure. The density of those micro-factures is strong function of the chemical concentration and the injected volume. Creation of micro-factures leads to improve the formation conductivity and reduce the capillary forces, therefore, enhances the hydrocarbon recovery. The outcome of this study is to understand the impact of thermochemical treatment on rock integrity. The ultimate objective is to establish a relationship between the injected chemicals and the alterations of formation properties such as permeability and porosity. This work will serve as a baseline for designing and conducting thermochemical operations for hydrocarbon reservoirs. In this study a novel stimulation technique to increase stimulated reservoir volume (SRV) is presented. In basins with excessive tectonic stresses, the current novel treatment can become an enabler to deeply stimulate well stages which otherwise left untreated. A new methodology is developed to lower fracturing cost and increase unconventional gas production. A better connectivity reduces the required number of hydraulic fracturing-stages.

Original languageEnglish
Title of host publicationInternational Petroleum Technology Conference 2019, IPTC 2019
PublisherInternational Petroleum Technology Conference (IPTC)
ISBN (Electronic)9781613996195
DOIs
StatePublished - 2019

Publication series

NameInternational Petroleum Technology Conference 2019, IPTC 2019

Bibliographical note

Publisher Copyright:
© 2019, International Petroleum Technology Conference

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Hydrofracturing treatment
  • Mechanical properties
  • Micro-cracks
  • Microstructure
  • Unconventional formation

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Fuel Technology

Fingerprint

Dive into the research topics of 'Advanced study of pore structure and mechanical property change of tight sand due to thermochemical treatment'. Together they form a unique fingerprint.

Cite this