Additive printing of gold nanoparticles on paper substrate through office ink-jet printer

Mohammed Shariq; Amit Rai Dixit; Rupert Kargl; Somnath Chattopadhyaya; Meduri Venkata Sridutt; Pasagada Venkata Keerti Vardhan; Rebeka Rudolf

doi:10.1007/978-3-319-99353-9_24

Additive printing of gold nanoparticles on paper substrate through office ink-jet printer

Mohammed Shariq^*
, Amit Rai Dixit
, Rupert Kargl
, Somnath Chattopadhyaya
, Meduri Venkata Sridutt
, Pasagada Venkata Keerti Vardhan
, Rebeka Rudolf

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

1 Scopus citations

Abstract

The article reports the synthesis of the concentrated Gold Nanoparticles (AuNPs) ink and its printing on the paper substrate through Office Ink Jet printer. Initially, AuNPs were synthesized from the precursor Gold (III) Acetate through Ultrasonic Spray Pyrolysis. Ellipsoidal shaped AuNPs with a size distribution of below 50 nm were confirmed through TEM and DLS measurement. Maximum absorbance wavelength of AuNPs measured through UV-vis spectroscopy was 532 nm. Further, the AuNPs ink was prepared through the rotavapour and filtered upto the Au concentration of 600 ppm determined through ICP-OES. The AuNPs printed patterns on the photo paper substrate were successfully printed and further analyzed with SEM.

Original language	English
Title of host publication	Lecture Notes in Mechanical Engineering
Publisher	Pleiades journals
Pages	220-228
Number of pages	9
DOIs	https://doi.org/10.1007/978-3-319-99353-9_24
State	Published - 2019
Externally published	Yes

Publication series

Name	Lecture Notes in Mechanical Engineering
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Bibliographical note

Publisher Copyright:
© Springer Nature Switzerland AG 2019.

Keywords

Gold nanoparticles
Office ink jet printer
Paper substrate
Printing
Synthesis

ASJC Scopus subject areas

Automotive Engineering
Aerospace Engineering
Mechanical Engineering
Fluid Flow and Transfer Processes

Access to Document

10.1007/978-3-319-99353-9_24

Cite this

@inbook{ba9793eaf3634fcd985a4b4b1f16dc48,

title = "Additive printing of gold nanoparticles on paper substrate through office ink-jet printer",

abstract = "The article reports the synthesis of the concentrated Gold Nanoparticles (AuNPs) ink and its printing on the paper substrate through Office Ink Jet printer. Initially, AuNPs were synthesized from the precursor Gold (III) Acetate through Ultrasonic Spray Pyrolysis. Ellipsoidal shaped AuNPs with a size distribution of below 50 nm were confirmed through TEM and DLS measurement. Maximum absorbance wavelength of AuNPs measured through UV-vis spectroscopy was 532 nm. Further, the AuNPs ink was prepared through the rotavapour and filtered upto the Au concentration of 600 ppm determined through ICP-OES. The AuNPs printed patterns on the photo paper substrate were successfully printed and further analyzed with SEM.",

keywords = "Gold nanoparticles, Office ink jet printer, Paper substrate, Printing, Synthesis",

author = "Mohammed Shariq and Dixit, \{Amit Rai\} and Rupert Kargl and Somnath Chattopadhyaya and Sridutt, \{Meduri Venkata\} and Vardhan, \{Pasagada Venkata Keerti\} and Rebeka Rudolf",

note = "Publisher Copyright: {\textcopyright} Springer Nature Switzerland AG 2019.",

year = "2019",

doi = "10.1007/978-3-319-99353-9\_24",

language = "English",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Pleiades journals",

pages = "220--228",

booktitle = "Lecture Notes in Mechanical Engineering",

}

TY - CHAP

T1 - Additive printing of gold nanoparticles on paper substrate through office ink-jet printer

AU - Shariq, Mohammed

AU - Dixit, Amit Rai

AU - Kargl, Rupert

AU - Chattopadhyaya, Somnath

AU - Sridutt, Meduri Venkata

AU - Vardhan, Pasagada Venkata Keerti

AU - Rudolf, Rebeka

PY - 2019

Y1 - 2019

N2 - The article reports the synthesis of the concentrated Gold Nanoparticles (AuNPs) ink and its printing on the paper substrate through Office Ink Jet printer. Initially, AuNPs were synthesized from the precursor Gold (III) Acetate through Ultrasonic Spray Pyrolysis. Ellipsoidal shaped AuNPs with a size distribution of below 50 nm were confirmed through TEM and DLS measurement. Maximum absorbance wavelength of AuNPs measured through UV-vis spectroscopy was 532 nm. Further, the AuNPs ink was prepared through the rotavapour and filtered upto the Au concentration of 600 ppm determined through ICP-OES. The AuNPs printed patterns on the photo paper substrate were successfully printed and further analyzed with SEM.

AB - The article reports the synthesis of the concentrated Gold Nanoparticles (AuNPs) ink and its printing on the paper substrate through Office Ink Jet printer. Initially, AuNPs were synthesized from the precursor Gold (III) Acetate through Ultrasonic Spray Pyrolysis. Ellipsoidal shaped AuNPs with a size distribution of below 50 nm were confirmed through TEM and DLS measurement. Maximum absorbance wavelength of AuNPs measured through UV-vis spectroscopy was 532 nm. Further, the AuNPs ink was prepared through the rotavapour and filtered upto the Au concentration of 600 ppm determined through ICP-OES. The AuNPs printed patterns on the photo paper substrate were successfully printed and further analyzed with SEM.

KW - Gold nanoparticles

KW - Office ink jet printer

KW - Paper substrate

KW - Printing

KW - Synthesis

UR - https://www.scopus.com/pages/publications/85053454087

U2 - 10.1007/978-3-319-99353-9_24

DO - 10.1007/978-3-319-99353-9_24

M3 - Chapter

AN - SCOPUS:85053454087

T3 - Lecture Notes in Mechanical Engineering

SP - 220

EP - 228

BT - Lecture Notes in Mechanical Engineering

PB - Pleiades journals

ER -

Additive printing of gold nanoparticles on paper substrate through office ink-jet printer

Abstract

Publication series

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this