A study on machinability of leather using CO2-based laser beam machining process

S. Vasanth; T. Muthuramalingam

doi:10.1007/978-981-13-1724-8_23

A study on machinability of leather using CO₂-based laser beam machining process

S. Vasanth
, T. Muthuramalingam^*

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

18 Scopus citations

Abstract

The utilization of laser technology on machining leather has grown significantly during recent years due to number of advantages such as flexibility, high production speed, possibility to cut complex geometries, easier cutting over conventional cutting methods of slitting knifes, die press techniques and manual cutting . In the present work, an endeavor has been proposed to analyze the machinability of leather using CO₂-based laser beam machining (LBM) process. Buffalo leather has been taken as specimens in the present study. It has been inferred that LBM can produce less dross compared to conventional machining while cutting leather.

Original language	English
Title of host publication	Lecture Notes in Mechanical Engineering
Publisher	Pleiades journals
Pages	239-244
Number of pages	6
DOIs	https://doi.org/10.1007/978-981-13-1724-8_23
State	Published - 2018
Externally published	Yes

Publication series

Name	Lecture Notes in Mechanical Engineering
Volume	PartF7
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Bibliographical note

Publisher Copyright:
© Springer Nature Singapore Pte Ltd. 2019.

Keywords

CO
LBM
Leather
Surface

ASJC Scopus subject areas

Automotive Engineering
Aerospace Engineering
Mechanical Engineering
Fluid Flow and Transfer Processes

Access to Document

10.1007/978-981-13-1724-8_23

Cite this

@inbook{a2c9217a914343ecbb431a52489fd657,

title = "A study on machinability of leather using CO2-based laser beam machining process",

abstract = "The utilization of laser technology on machining leather has grown significantly during recent years due to number of advantages such as flexibility, high production speed, possibility to cut complex geometries, easier cutting over conventional cutting methods of slitting knifes, die press techniques and manual cutting . In the present work, an endeavor has been proposed to analyze the machinability of leather using CO2-based laser beam machining (LBM) process. Buffalo leather has been taken as specimens in the present study. It has been inferred that LBM can produce less dross compared to conventional machining while cutting leather.",

keywords = "CO, LBM, Leather, Surface",

author = "S. Vasanth and T. Muthuramalingam",

note = "Publisher Copyright: {\textcopyright} Springer Nature Singapore Pte Ltd. 2019.",

year = "2018",

doi = "10.1007/978-981-13-1724-8\_23",

language = "English",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Pleiades journals",

pages = "239--244",

booktitle = "Lecture Notes in Mechanical Engineering",

}

TY - CHAP

T1 - A study on machinability of leather using CO2-based laser beam machining process

AU - Vasanth, S.

AU - Muthuramalingam, T.

N1 - Publisher Copyright: © Springer Nature Singapore Pte Ltd. 2019.

PY - 2018

Y1 - 2018

N2 - The utilization of laser technology on machining leather has grown significantly during recent years due to number of advantages such as flexibility, high production speed, possibility to cut complex geometries, easier cutting over conventional cutting methods of slitting knifes, die press techniques and manual cutting . In the present work, an endeavor has been proposed to analyze the machinability of leather using CO2-based laser beam machining (LBM) process. Buffalo leather has been taken as specimens in the present study. It has been inferred that LBM can produce less dross compared to conventional machining while cutting leather.

AB - The utilization of laser technology on machining leather has grown significantly during recent years due to number of advantages such as flexibility, high production speed, possibility to cut complex geometries, easier cutting over conventional cutting methods of slitting knifes, die press techniques and manual cutting . In the present work, an endeavor has been proposed to analyze the machinability of leather using CO2-based laser beam machining (LBM) process. Buffalo leather has been taken as specimens in the present study. It has been inferred that LBM can produce less dross compared to conventional machining while cutting leather.

KW - CO

KW - LBM

KW - Leather

KW - Surface

UR - https://www.scopus.com/pages/publications/85054739797

U2 - 10.1007/978-981-13-1724-8_23

DO - 10.1007/978-981-13-1724-8_23

M3 - Chapter

AN - SCOPUS:85054739797

T3 - Lecture Notes in Mechanical Engineering

SP - 239

EP - 244

BT - Lecture Notes in Mechanical Engineering

PB - Pleiades journals

ER -