A new theory on pure pre-rolling resistance through pendulum oscillations

Igor Gilavdary; Samir Mekid; Natalia Riznookaya

doi:10.1177/1350650112465516

A new theory on pure pre-rolling resistance through pendulum oscillations

Igor Gilavdary
, Samir Mekid^*
, Natalia Riznookaya

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

7 Scopus citations

Abstract

Theoretical and experimental investigations of pre-rolling resistance of a ball on a flat surface were carried out. The cycling displacements of the ball were considered within a range much smaller than the radius of a contact patch. The method of free oscillations of a pendulum supported with two balls on a substrate is proposed for experimental investigations. It is proved that this method allows measurement of a set of parameters of pre-rolling resistance with high sensitivity and precision. The proposed setup has secured pure rolling measurement conditions.

Original language	English
Pages (from-to)	618-628
Number of pages	11
Journal	Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Volume	227
Issue number	6
DOIs	https://doi.org/10.1177/1350650112465516
State	Published - Jun 2013

Bibliographical note

Funding Information:
The authors would like to acknowledge the funding support from both institutions, i.e. Belarusian National Technical University (BNTU) and King Fahd University of Petroleum and Minerals (KFUPM).

Keywords

Adhesion pressure
Adhesion work
Friction force
Friction moment
Pendulum-based rolling
Pre-rolling
Pre-rolling hysteresis
Rolling resistance

ASJC Scopus subject areas

Mechanical Engineering
Surfaces and Interfaces
Surfaces, Coatings and Films

Access to Document

10.1177/1350650112465516

Cite this

@article{db0f228f90de478da7cc5a3f0d418548,

title = "A new theory on pure pre-rolling resistance through pendulum oscillations",

abstract = "Theoretical and experimental investigations of pre-rolling resistance of a ball on a flat surface were carried out. The cycling displacements of the ball were considered within a range much smaller than the radius of a contact patch. The method of free oscillations of a pendulum supported with two balls on a substrate is proposed for experimental investigations. It is proved that this method allows measurement of a set of parameters of pre-rolling resistance with high sensitivity and precision. The proposed setup has secured pure rolling measurement conditions.",

keywords = "Adhesion pressure, Adhesion work, Friction force, Friction moment, Pendulum-based rolling, Pre-rolling, Pre-rolling hysteresis, Rolling resistance",

author = "Igor Gilavdary and Samir Mekid and Natalia Riznookaya",

note = "Funding Information: The authors would like to acknowledge the funding support from both institutions, i.e. Belarusian National Technical University (BNTU) and King Fahd University of Petroleum and Minerals (KFUPM). ",

year = "2013",

month = jun,

doi = "10.1177/1350650112465516",

language = "English",

volume = "227",

pages = "618--628",

journal = "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology",

issn = "1350-6501",

publisher = "SAGE Publications Ltd",

number = "6",

}

TY - JOUR

T1 - A new theory on pure pre-rolling resistance through pendulum oscillations

AU - Gilavdary, Igor

AU - Mekid, Samir

AU - Riznookaya, Natalia

N1 - Funding Information: The authors would like to acknowledge the funding support from both institutions, i.e. Belarusian National Technical University (BNTU) and King Fahd University of Petroleum and Minerals (KFUPM).

PY - 2013/6

Y1 - 2013/6

N2 - Theoretical and experimental investigations of pre-rolling resistance of a ball on a flat surface were carried out. The cycling displacements of the ball were considered within a range much smaller than the radius of a contact patch. The method of free oscillations of a pendulum supported with two balls on a substrate is proposed for experimental investigations. It is proved that this method allows measurement of a set of parameters of pre-rolling resistance with high sensitivity and precision. The proposed setup has secured pure rolling measurement conditions.

AB - Theoretical and experimental investigations of pre-rolling resistance of a ball on a flat surface were carried out. The cycling displacements of the ball were considered within a range much smaller than the radius of a contact patch. The method of free oscillations of a pendulum supported with two balls on a substrate is proposed for experimental investigations. It is proved that this method allows measurement of a set of parameters of pre-rolling resistance with high sensitivity and precision. The proposed setup has secured pure rolling measurement conditions.

KW - Adhesion pressure

KW - Adhesion work

KW - Friction force

KW - Friction moment

KW - Pendulum-based rolling

KW - Pre-rolling

KW - Pre-rolling hysteresis

KW - Rolling resistance

UR - https://www.scopus.com/pages/publications/84884564027

U2 - 10.1177/1350650112465516

DO - 10.1177/1350650112465516

M3 - Article

AN - SCOPUS:84884564027

SN - 1350-6501

VL - 227

SP - 618

EP - 628

JO - Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

JF - Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

IS - 6

ER -

A new theory on pure pre-rolling resistance through pendulum oscillations

Abstract

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this