Interdisciplinary Research Center for Intelligent Manufacturing & Robotics

2023

Adaptive Optics Rotational Design and Electro-Magnetic Actuation

Alzaydi, A., 2023, 20th International Learning and Technology Conference, L and T 2023. Sarirete, A., Balfagih, Z., Brahimi, T., El-Amin Mousa, M. F. & Elkafrawy, P. M. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 97-102 6 p. (20th International Learning and Technology Conference, L and T 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Optical sensor for NO₂ gas detection using an external cavity diode laser

Gasmi, K., Aljalal, A. & Al-Basheer, W., 2023, Optical Sensors 2023. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 1257214. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12572).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Self-Balancing System and Control Design for Two-Wheeled Single-Track Vehicles

Alzaydi, A., 2023, 20th International Learning and Technology Conference, L and T 2023. Sarirete, A., Balfagih, Z., Brahimi, T., El-Amin Mousa, M. F. & Elkafrawy, P. M. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 109-113 5 p. (20th International Learning and Technology Conference, L and T 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2022

A MULTI-SCALE MODEL FOR MICROSTRUCTURE EVOLUTION DURING A MULTIMATERIAL ADDITIVE MANUFACTURING PROCESS

Abubakar, A. A., Al-Athel, K. S., Akhtar, S. S. & Abubakar, A., 2022, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), v02bt02a036. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2-B).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

A PHYSICS-BASED COMPUTATIONAL MODEL FOR THE COLD SPRAY DEPOSITION OF COMPOSITE COATINGS

Abubakar, A. A., Arif, A. F. M., Akhtar, S. S. & Al-Athel, K. S., 2022, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), v02bt02a001. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2-B).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Characterization of Noise Sources, Built Material and Acoustic Parameters of a Newly Renovated Special Purpose Space

Zaid, M., Rafat, Y., Mustafa, S., Ali, R. & Salem, B., 2022, Recent Trends in Design, Materials and Manufacturing - Selected Proceedings of ICRADMM 2020. Singh, M. K. & Gautam, R. K. (eds.). Springer Science and Business Media Deutschland GmbH, p. 261-278 18 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

DESIGN AND DEVELOPMENT OF NOVEL α-SiAlON/Co AND α-SiAlON/TiCN COMPOSITES FOR CUTTING TOOL INSERTS

Alotaibi, A. D., Abubakar, A. A., Akhtar, S. S., Hakeem, A. S., Al-Athel, K. S. & Arif, A. F. M., 2022, Advanced Materials: Design, Processing, Characterization and Applications; Advances in Aerospace Technology. American Society of Mechanical Engineers (ASME), V003T03A010. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

INVESTIGATING THE TRIBOLOGICAL ASPECTS OF TOOL WEAR MECHANISM AND TOOL LIFE IN SUSTAINABLE LUBRI-COOLING FACE MILLING PROCESS OF PARTICLE REINFORCED SICP/AL METAL MATRIX COMPOSITES

Laghari, R. A., Akhtar, S. S., Mekid, S., Laghari, A. A. & Jamil, M., 2022, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), v02bt02a062. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2-B).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

MATERIAL BEHAVIOR OF HYDROPHOBIC YB2O3 AND PHOTOCATALYTIC TIO2 COATINGS IN HVAC WATER COOLING TOWERS: A CASE STUDY

Al-Athel, K., Aldossari, T. & Akhtar, S. S., 2022, Advanced Materials: Design, Processing, Characterization and Applications; Advances in Aerospace Technology. American Society of Mechanical Engineers (ASME), V003T03A034. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Mechanical Behavior of TPMS-Based Solid Network Structures Obtained by Additive Manufacturing Technology

Abouelmajd, M., El Khadiri, I., Ezzaraa, I., Zemzami, M., El Afi, M., Lagache, M., Almangour, B., Arroub, I., Bouferra, R., Essaleh, M., Bahlaoui, A., Hmina, N. & Belhouideg, S., 2022, 8th International Conference on Optimization and Applications, ICOA 2022 - Proceedings. Hanaa, H., Francesco, M., Stefano, R. & Marina, R. (eds.). Institute of Electrical and Electronics Engineers Inc., (8th International Conference on Optimization and Applications, ICOA 2022 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Performance of a Cloud-Aerosol Lidar system at 532 and 1064 nm: application to studies of cloud structures and aerosol profiles from the ground

Gasmi, K., 2022, Remote Sensing of Clouds and the Atmosphere XXVII. Comeron, A., Kassianov, E. I., Schafer, K., Picard, R. H., Weber, K. & Singh, U. N. (eds.). SPIE, 1226509. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12265).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2021

A simple and reliable counting and display circuit for laser rangefinder

Gasmi, K., 2021, Optical Sensors 2021. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 1177219. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11772).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Dynamic magnification of a cantilever beam using a reciprocating load, numerical and experimental analysis

AlJabr, A., Al-Tairi, M. & Bashmal, S., 2021, "Advances in Acoustics, Noise and Vibration - 2021" Proceedings of the 27th International Congress on Sound and Vibration, ICSV 2021. Carletti, E., Crocker, M., Pawelczyk, M. & Tuma, J. (eds.). Silesian University Press, ("Advances in Acoustics, Noise and Vibration - 2021" Proceedings of the 27th International Congress on Sound and Vibration, ICSV 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Integrated condition based maintenance and spare parts supply with incoming quality control and inspection errors

Al Hanbali, A., Saleh, H. H. & Alsawafy, O. G., 2021, IISE Annual Conference and Expo 2021. Ghate, A., Krishnaiyer, K. & Paynabar, K. (eds.). Institute of Industrial and Systems Engineers, IISE, p. 507-512 6 p. (IISE Annual Conference and Expo 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

IoT for health and usage monitoring systems: Mitigating consequences in manufacturing under CBM

Mekid, S., 22 Mar 2021, 18th IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2021. Institute of Electrical and Electronics Engineers Inc., p. 569-574 6 p. 9429296. (18th IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Pore size assessment of nanoporous alumina using absorption of laser light

Aljalal, A. M., Gasmi, K. & Al-Basheer, W., 2021, Optical Sensors 2021. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 1177213. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11772).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2020

Blue external-cavity diode laser for NO₂ gas detection

Gasmi, K., Aljalal, A. & Al-Basheer, W., 2020, Semiconductor Lasers and Laser Dynamics IX. Sciamanna, M., Michalzik, R., Panajotov, K. & Hofling, S. (eds.). SPIE, 1135616. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11356).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Sensing signal assessment in sensorial materials: Key embedding conditions

Mekid, S. & Daraghma, H., 20 Jul 2020, Proceedings of the 17th International Multi-Conference on Systems, Signals and Devices, SSD 2020. Institute of Electrical and Electronics Engineers Inc., p. 626-630 5 p. 9364207. (Proceedings of the 17th International Multi-Conference on Systems, Signals and Devices, SSD 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Utilizing wall collision broadening of O₂absorption line for pore size assessment

Aljalal, A., Al-Basheer, W. & Gasmi, K., 2020, Novel Optical Systems, Methods, and Applications XXIII. Hahlweg, C. F. & Mulley, J. R. (eds.). SPIE, 114830Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11483).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2019

An improved predictive model for effective thermal conductivity of polymer composites with non-dilute filler concentrations

Raza, K., Akhtar, S. S., Arif, A. F. M. & Hakeem, A. S., 2019, Advanced Materials: Design, Processing, Characterization, and Applications. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

A systematic material design approach to develop self-lubricating ceramic-composite tool inserts for dry cutting conditions

Akhtar, S. S., 2019, Advanced Materials: Design, Processing, Characterization, and Applications. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Configuration and business protocol of international load sharing of manufacturing and its challenges under I4.0 and IIoT

Mekid, S. & Akbar, U., 2019, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2B-2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Design of a composite encapsulation for concentrated photovoltaic systems with improved performance

Raza, K., Akhtar, S. S., Arif, A. F. M. & Hakeem, A. S., 2019, Advanced Materials: Design, Processing, Characterization, and Applications. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Estimation of pore sizes using laser absorption in molecular oxygen gas enclosed in mesoporous alumina

Al-Saudi, A., Al-Basheer, W., Aljalal, A., Gasmi, K. & Qari, S., 2019, Optical Sensors 2019. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 1102818. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11028).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Experimental pre-rolling friction determination of corundum balls on silicium wafers using highly stable pendulum

Mekid, S., Gilavdary, I. & Riznoukaya, N., 2019, Advanced Materials: Design, Processing, Characterization, and Applications. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Laser-induced shockwave crystallization of nitrates

Al-Basheer, W., Darojat, Y., Gasmi, K. & Aljalal, A., 2019, Nonlinear Optics and Applications XI. Bertolotti, M. & Zheltikov, A. M. (eds.). SPIE, 110260X. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11026).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Wide dynamic range laser remote sensing detection chain

Gasmi, K., 2019, Optical Sensors 2019. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 110281C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11028).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2018

Design and development of a detection chain for an atmospheric lidar system

Gasmi, K., 2018, Optical Sensing and Detection V. Berghmans, F. & Mignani, A. G. (eds.). SPIE, 1068029. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10680).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Finite element modeling of dynamic response of an elastic beam subject to a periodically moving load

Bashmal, S. & Ouakad, H., 2018, 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling. International Institute of Acoustics and Vibration, IIAV, p. 4451-4458 8 p. (25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling; vol. 7).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Hybrid alumina composites for cutting tool inserts: Material design and development

Waqar, T., Akhtar, S. S., Arif, A. F. M. & Al-Athel, K. S., 2018, Materials: Genetics to Structures. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Temperature dependence of external differential quantum efficiency of GaN-based blue laser diode

Al-Basheer, W., Aljalal, A., Gasmi, K. & Adigun, T. O., 2018, Semiconductor Lasers and Laser Dynamics VIII. Michalzik, R., Panajotov, K. & Sciamanna, M. (eds.). SPIE, 106821O. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10682).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2017

Battery performance and low power challenges for standalone mechatronic devices

Mekid, S. & Hussain, R., 4 Dec 2017, 2017 14th International Multi-Conference on Systems, Signals and Devices, SSD 2017. Institute of Electrical and Electronics Engineers Inc., p. 499-504 6 p. (2017 14th International Multi-Conference on Systems, Signals and Devices, SSD 2017; vol. 2017-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Detection of trace amount of NO₂ gas using tunable blue laser diode

Aljalal, A., Altanany, S., Gasmi, K., Al-Basheer, W. & Hamad, M., 2017, Optical Sensors 2017. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 102311E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10231).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Efficient least-loss algorithm for a bi-objective trim-loss problem

Alfares, H. K. & Alsawafy, O. G., 2017, 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017. IEOM Society, p. 2118-2122 5 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Existence and stabilization of a Kirchhoff moving string with a distributed delay in the internal feedback

Kelleche, A. & Tatar, N. E., 1 Jul 2017, Proceedings of the 2017 International Conference on Mathematics and Information Technology, ICMIT 2017. Institute of Electrical and Electronics Engineers Inc., p. 384-389 6 p. (Proceedings of the 2017 International Conference on Mathematics and Information Technology, ICMIT 2017; vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Experimental ultrasonic consolidation of FBGs in aluminum

Mekid, S. & Daraghma, H., 2017, Advances in Manufacturing Technology XXXI - Proceedings of the 15th International Conference on Manufacturing Research, ICMR 2017, Incorporating the 32nd National Conference on Manufacturing Research. El Souri, M., Gao, J. & Keates, S. (eds.). IOS Press BV, p. 84-89 6 p. (Advances in Transdisciplinary Engineering; vol. 6).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

High-resolution investigation of longitudinal modes of a GaN-based blue laser diode

Al-Basheer, W., Aljalal, A., Gasmi, K. & Adigun, T. O., 2017, Optical Sensors 2017. Baldini, F., Homola, J. & Lieberman, R. A. (eds.). SPIE, 102312V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10231).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

MEMS based soft nervous materials with ambient RF power supply: Feasibility study

Mekid, S., Qureshi, K., Saleh, A. & Sharawi, M., 4 Dec 2017, 2017 14th International Multi-Conference on Systems, Signals and Devices, SSD 2017. Institute of Electrical and Electronics Engineers Inc., p. 337-341 5 p. (2017 14th International Multi-Conference on Systems, Signals and Devices, SSD 2017; vol. 2017-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2016

Computational design and development of alumina-nickel droplet composites

Akhtar, S. S., Arif, A. F. M., Siddiqui, M. U., Raza, K., Kareem, L. T. & Hakeem, A. S., 2016, Emerging Technologies; Materials: Genetics to Structures; Safety Engineering and Risk Analysis. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 14).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Fast and low noise optical receiver using Si APD for cloud-aerosol LIDAR

Gasmi, K., 2016, Optical Sensing and Detection IV. Berghmans, F. & Mignani, A. G. (eds.). SPIE, 98990I. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9899).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Measurements of profiles of aerosol/cloud in the lower atmosphere using a lidar system

Gasmi, K., 2016, Remote Sensing of Clouds and the Atmosphere XXI. Schafer, K., Comeron, A., Jack, J. W., Picard, R. H., Weber, K. & Kassianov, E. I. (eds.). SPIE, 100010A. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10001).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Towards an evaluation of stiffness parameters of Micro-beams

Bashmal, S., 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations, (ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2015

Active differential optical absorption spectroscopy for NO₂ gas pollution using blue light emitting diodes

Aljalal, A., Gasmi, K. & Al-Basheer, W., 2015, Optical Sensors 2015. Baldini, F., Lieberman, R. A. & Homola, J. (eds.). SPIE, 95062A. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9506).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Characterization of fiber optics integrity under several embedding parameters in smart materials

Mekid, S., Butt, A. M. & Qureshi, K., 2015, Integrated System Design and Implementation; Structural Health Monitoring; Bioinspired Smart Materials and Systems; Energy Harvesting. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Development smart/nervous material with novel sensor embedding techniques-A review

Butt, A. M. & Mekid, S., 2015, Integrated System Design and Implementation; Structural Health Monitoring; Bioinspired Smart Materials and Systems; Energy Harvesting. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Evolution of blue laser diode spectral lines with applied current in the range 446-448 nm

Al-Basheer, W., Aljalal, A. & Gasmi, K., 2015, Optical Sensors 2015. Baldini, F., Lieberman, R. A. & Homola, J. (eds.). SPIE, 950629. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9506).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Investigating temperature effects on the spectral lines of blue laser diodes for monitoring NO₂ gas pollution

Gasmi, K., Al-Basheer, W. & Aljalal, A., 2015, Optical Sensors 2015. Baldini, F., Lieberman, R. A. & Homola, J. (eds.). SPIE, 950628. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9506).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Upscaling sensing materials with challenges of sensors embedding in powder based materials and polymers

Mekid, S., Saheb, N., Daraghma, H., Butt, A. & Qureshi, K., 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

2014

Design and testing of a micro-dynamometer for desktop micro-milling machine

Mekid, S., 2014, Engineering Solutions for Intensification of Production. Trans Tech Publications Ltd, p. 267-273 7 p. (Advanced Materials Research; vol. 902).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Gas nitriding of AISI H13 steel extrusion dies: Consideration of sharp features in the die profiles

Akhtar, S. S., Arif, A. F. M. & Abubakar, A. A., 2014, Proceedings - MONTREAL'2014 AES-ATEMA: 17th AES-ATEMA International Conference on Advances and Trends in Engineering Materials and Their Applications, ATEMA MONTREAL 2014. Haddad, Y. M. (ed.). Advanced Engineering Solutions, p. 77-85 9 p. (AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications; vol. 2014-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Interdisciplinary Research Center for Intelligent Manufacturing & Robotics

Research output

Search results