Interdisciplinary Research Center for Advanced Materials

Research output

Research output per year 1982 2018 2019 2020 2021 2022 2023 2024 2025

• 106252 Citations
• 137 h-index
• 2569 Article
• 296 Review article
• 151 Conference contribution
• 134 Patent
• 270 More
  • 131 Chapter
  • 34 Book
  • 31 Comment/debate
  • 27 Conference article
  • 21 Editorial
  • 16 Foreword/postscript
  • 5 Paper
  • 3 Meeting Abstract
  • 1 Letter
  • 1 Short survey

Research output per year

Research output per year

Search results

• 2019

  Finite element modeling of hybrid friction diffusion welding of tube-tubesheet joints

  Al-Badour, F., 2019, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction 100%
  • Joints (Structural Components) 100%
  • Welding 100%
  • Finite Element Modeling 100%
  • Hybrid 100%

• Improvement in rheological features, fluid loss and swelling inhibition of water-based drilling mud by using surfactant-modified graphene

  Rana, A., Saleh, T. A. & Arfaj, M. K., 2019, Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference 2019, ADIP 2019. Society of Petroleum Engineers, (Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference 2019, ADIP 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Drilling Mud 100%
  • Surfactant 100%
  • Graphene 100%
  • Fluid 100%
  • Inhibition 100%
  27 Scopus citations

• Investigations of in vitro corrosion, and wear properties of TiN PVD coating on Ti6Al4V alloy for dental application

  Hussein, M., Adesina, A., Kumar, M., Sorour, A. A. & Al-Aqeeli, N., 2019, Surface Modification Technologies. Astarita, A., Squillace, A., Sudarshan, T. S. & Carlone, P. (eds.). Trans Tech Publications Ltd, p. 1-6 6 p. (Key Engineering Materials; vol. 813 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Corrosion 100%
  • Wear Property 100%
  • Physical Vapor Deposition 100%
  • Application 100%
  • Alloy 100%
  12 Scopus citations

• Opportunities for radiation pressure in characterization of micro- / nano-materials

  Leseman, Z. C., 2019, Micro- and Nano-Systems Engineering and Packaging. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Characterization 100%
  • Devices 100%
  • Materials 100%
  • Nanomaterial 100%
  • Radiation 100%

• Organic-inorganic heterostructures for stretchable electronics

  Rojas, J. P., 2019, Micro- and Nanotechnology Sensors, Systems, and Applications XI. George, T. & Islam, M. S. (eds.). SPIE, 1098215. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10982).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Heterostructures 100%
  • Electronics 100%
  • Heterojunction 100%
  • Printed Circuit Board 50%
  • Electronic Circuit 40%
  1 Scopus citations

• Synthesis of adsorbent materials by emulsion polymerization for efficient oil/water separation and hydrocarbons recovery from produced water

  AlGhunaimi, F., Alsaeed, D., Harith, A. & Saleh, T., 2019, Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference 2018, ADIPEC 2018. Society of Petroleum Engineers, (Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference 2018, ADIPEC 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Produced Water 100%
  • Adsorbent Material 100%
  • Oil-Water Emulsion 100%
  • Emulsion Polymerization 100%
  • Graphene 100%
  3 Scopus citations

• The Effect of Milling Time on Structural, Friction and Wear Behavior of Hot Isostatically Pressed Ti–Ni Alloys for Orthopedic Applications

  Fellah, M., Hezil, N., Abdul Samad, M., Touhami, M. Z., Montagne, A., Iost, A., Mejias, A. & Kossman, S., 2019, TMS 2019 148th Annual Meeting and Exhibition Supplemental Proceedings. Springer International Publishing, p. 865-875 11 p. (Minerals, Metals and Materials Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction 100%
  • Orthopedic Application 100%
  • Milling (Machining) 100%
  • Alloy 100%
  • Morphology 66%
  13 Scopus citations
• 2018

  Damage characterization of carbon and glass fiber composite plates subjected to low-velocity impact using thermography

  Al-Athel, K. S., Alomari, A. & Arif, A. F. M., 2018, Mechanics of Solids, Structures, and Fluids. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Characterization 100%
  • Laminated Plate 100%
  • Glass-Fiber Reinforced Plastic 100%
  • Carbon Fiber 100%
  • Composite Material 100%

• Effect of welding parameters on temperature distribution during friction stir spot welding of commercial pure copper lap joint

  Mahgoub, A., Bazoune, A., Al-Badour, F., Merah, N. & Shuaib, A., 2018, Processes. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Spot Welding 100%
  • Pure Copper 100%
  • Friction 100%
  • Welding 100%
  • Temperature Distribution 100%
  1 Scopus citations

• Folding and stretching a thermoelectric generator

  Prieto Rojas, J., Rehman, M. U., Albettar, M. A., Conchouso, D., Arevalo, A., Singh, D., Foulds, I. & Hussain, M. M., 2018, Micro- and Nanotechnology Sensors, Systems, and Applications X. Islam, M. S., George, T. & Dutta, A. K. (eds.). SPIE, 106390E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10639).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Stretching 100%
  • Thermoelectrics 100%
  • Generators 100%
  • Thermoelectric Generator 100%
  • Devices 75%
  2 Scopus citations

• Hybrid alumina composites for cutting tool inserts: Material design and development

  Waqar, T., Akhtar, S. S., Arif, A. F. M. & Al-Athel, K. S., 2018, Materials: Genetics to Structures. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Materials Design 100%
  • Cutting Tool 100%
  • Composite Material 100%
  • Aluminum Oxide 100%
  • Structural Property 50%
  1 Scopus citations

• Marine anticorrosion and antifouling assessment of multifunctionalized hybrid sol-gel coatings

  Suleiman, R., Khalil, A., Khaled, M. & El Ali, B., 2018, Corrosion Conference and Expo 2018. National Assoc. of Corrosion Engineers International, (NACE - International Corrosion Conference Series; vol. 2018-April).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Sol Gel Coating 100%
  • Coating 100%
  • Bacterial Spore 66%
  • Corrosion 33%
  • Corrosion Inhibitor 11%
  1 Scopus citations

• New formulations for the control of iron sulfide deposits in oil production facilities

  Jawish, M. W., Suleiman, R., Wang, Q., Chen, T. & Shen, S. W., 2018, Society of Petroleum Engineers - SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition 2018, SATS 2018. Society of Petroleum Engineers, (Society of Petroleum Engineers - SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition 2018, SATS 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Oil Production 100%
  • Temperature 100%
  • Iron 100%
  • Solid 100%
  • Iron Sulfide 100%
  4 Scopus citations

• Optimizing process conditions in friction stir-diffusion lap welding of aluminum alloy with cold rolled steel

  Al-Badour, F., Merah, N., Mohamed, O., Bazoune, A. & Shuaib, A., 2018, Materials; Joint MSEC-NAMRC-Manufacturing USA. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Rotational Speed 100%
  • Process Condition 100%
  • Friction 100%
  • Welding 100%
  • Alloy 100%
  1 Scopus citations

• Prediction of residual stress and damage in thermal spray coatings using hybrid computational approach

  Abubakar, A. A., Arif, A. F. M., Sohail Akhtar, S. & Al-Athel, K. S., 2018, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Residual Stress 100%
  • Hybrid 100%
  • Prediction 100%
  • Thermal Spray Coating 100%
  • Point Cloud 80%
  2 Scopus citations

• Two-dimensional heat transfer considerations for thermoreflectance measurements

  Sarkar, D., Chakraborty, P. P., Terry Beck, B. & Leseman, Z. C., 2018, Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8B-2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Laser Flux 100%
  2 Scopus citations
• 2017

  A promising coating of nanostructured graphene-ceria nanofillers in polyurethane for corrosion protection

  Rahman, M. M., 2017, Corrosion Conference and Expo 2017. National Assoc. of Corrosion Engineers International, p. 5822-5827 6 p. (NACE - International Corrosion Conference Series; vol. 8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Polyurethane 100%
  • Cerium Oxide 100%
  • Corrosion Protection 100%
  • Graphene 100%
  • Coating 100%
  5 Scopus citations

• Assessment of the anticorrosion and antifouling performances of a novel hybrid epoxy-siliconized coating

  Suleiman, R., 2017, Corrosion Conference and Expo 2017. National Assoc. of Corrosion Engineers International, p. 1345-1355 11 p. (NACE - International Corrosion Conference Series; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Hybrid 100%
  • Performance 100%
  • Fouling 100%
  • Seawater 100%
  • Gel 100%
  3 Scopus citations

• Effect of pin tool profile on mechanical and metallurgical properties in friction stir spot welding of pure copper

  Mahgoub, A., Merah, N., Bazoune, A. & Al-Badour, F., 14 Sep 2017, 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017. Institute of Electrical and Electronics Engineers Inc., p. 381-384 4 p. 8038676. (2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Weldment 100%
  • Spot Welding 100%
  • Pure Copper 100%
  • Friction 100%
  • Copper 100%
  2 Scopus citations

• Flowing gels for loss circulation prevention

  Hashmat, M. D., Sultan, A. S., Rahman, S., Shakil Hussain, S. M. & Ali, S. A., 2017, Society of Petroleum Engineers - SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition 2017. Society of Petroleum Engineers, p. 2151-2160 10 p. (Society of Petroleum Engineers - SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Gel 100%
  • Loss 100%
  • Materials 77%
  • Permeability 33%
  • Porous Material 22%
  12 Scopus citations

• Modeling multiaxial fatigue damage using polar equations

  Albinmousa, J., Iftikhar, S. H. & Al-Samkhan, M., 2017, Mechanics of Solids, Structures and Fluids; NDE, Structural Health Monitoring and Prognosis. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Critical Plane 100%
  • Fatigue Damage 100%
  • Multiaxial Fatigue 100%
  • Loading Path 75%
  • Strain 75%

• On-line condition monitoring of friction stir spot welding tool using vibration measurements

  Al-Badour, F., Mahgoub, A., Bazoune, A., Shuaib, A. & Merah, N., 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6A-2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction 100%
  • Spot Welding 100%
  • Welding 100%
  • Machining 33%
  • Structural Dynamics 33%
  3 Scopus citations

• Tube expansion & hybrid friction diffusion bonding of CU-NI and ASTM A516 G70 tube-to-tubesheet joints

  Hbbani, A., Al-Badour, F. & Bazoune, A., 2017, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction 100%
  • Diffusion Bonding 100%
  • Joints (Structural Components) 100%
  • Hybrid 100%
  • Copper 100%
  3 Scopus citations
• 2016

  Strength and hardness assessment of copper and copper alloy coatings on stainless steel substrates

  Ibrahim, M., Al-Athel, K. & Arif, A. F. M., 2016, Emerging Technologies; Materials: Genetics to Structures; Safety Engineering and Risk Analysis. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 14).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Mechanical Strength 100%
  • Coating 100%
  • Stainless Steel 100%
  • Copper 100%
  • Hardness 100%
  4 Scopus citations
• 2015

  Evaluation of chitosan and carboxymethyl cellulose (CMC) as ecofriendly corrosion inhibitors for X60 pipeline steel in CO₂ saturated 3.5% NaCI solution

  AlAhmary, A. A., Umoren, S. A. & Gasem, Z. M., 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 354-368 15 p. (European Corrosion Congress, EUROCORR 2015; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Steel Pipeline 100%
  • Inhibitor 100%
  • Corrosion Inhibitor 100%
  • Inhibition 100%
  • Evaluation 100%

• Friction stir seal welding (FSSW) tube-tubesheet joints made of steel

  Shuaib, A. R., Al-Badour, F. & Merah, N., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Seal Welding 100%
  • Welds 100%
  • Friction 100%
  • Joints (Structural Components) 100%
  • Steel 100%
  7 Scopus citations

• Influence of degassing and nanoclay loading on physical and flexural properties of epoxy

  Ali, Y., Al-Qadhi, M., Merah, N. & Rafiq, A., 2015, Diffusion in Solids and Liquids X. Öchsner, A., Delgado, J. M. P. Q., Shokuhf, A. & Murch, G. E. (eds.). Trans Tech Publications Ltd, Vol. 365. p. 237-243 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nanoclays 100%
  • Nanoclay 100%
  • Clay 100%
  • Epoxy Matrix 60%
  • Nanocomposites 40%
  5 Scopus citations

• Insitu electrochemical synthesis of Polyaniline/Graphene Nanocomposite Coatings for surface protection of mild steel

  Kumar, M. & Gasem, Z. M. A., 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 53 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Performance evaluation of polypropylene glycol as corrosion inhibitor for X60 pipeline steel in 15% HCI solution

  Umoren, S. A., 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 369-383 15 p. (European Corrosion Congress, EUROCORR 2015; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Corrosion Inhibitor 100%
  • Poly(propylene) 100%
  • Steel 100%
  • Solution 100%
  • Pipeline 100%

• Theoretical design of new benzimidazole derivatives as steel corrosion inhibitors in CO₂ corrosive environment: DFT and Monte Carlo approaches

  Obot, I. B., 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 390-401 12 p. (European Corrosion Congress, EUROCORR 2015; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Density Functional Theory 100%
  • Corrosion Inhibitor 100%
  • Carbon Dioxide 100%
  • Steel 100%
  • Environment 100%

• Thermal behavior of aluminum alloy metal foam heat sinks: A computational and experimental approach

  Al-Athel, K. S., Aly, S. P., Arif, A. F. M. & Mostaghimi, J., 2015, Thermal Management. American Society of Mechanical Engineers, (ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2015, collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Heat Sink 100%
  • Metal Foam 100%
  • Alloy 100%
  • Thermal Behavior 100%
  • Aluminum Alloys 100%
  2 Scopus citations

• Thin Film growth and characterization of Ti doped ZnO by RF/DC magnetron sputtering

  Baseer Haider, M., Al-Kuhaili, M. F., Durrani, S. M. A., Singaravelu, V. & Roqan, I., 2015, Oxide Semiconductors. Veal, T. D., Bierwagen, O., Higashiwaki, M. & Janotti, A. (eds.). Materials Research Society, p. 55-60 6 p. (Materials Research Society Symposium Proceedings; vol. 1731).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • ZnO 100%
  • Magnetron Sputtering 100%
  • Thin Film Growth 100%
  • Thin Film Characterization 100%
  • Film 100%
  1 Scopus citations

• Upscaling sensing materials with challenges of sensors embedding in powder based materials and polymers

  Mekid, S., Saheb, N., Daraghma, H., Butt, A. & Qureshi, K., 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Sensing Material 100%
  • Fiber 100%
  • Sensor 100%
  • Polymers 100%
  • Powder 100%
  3 Scopus citations
• 2014

  Effect of calcination temperature on the morphology of carbon nanosphere synthesized from polymethylmethacrylate

  Al-Ahmadi, A. F., Al-Daous, M. A. & Saleh, T. A., 2014, Material and Manufacturing Technology V. Trans Tech Publications Ltd, p. 55-59 5 p. (Advanced Materials Research; vol. 974).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Calcination 100%
  • Nanospheres 100%
  • Particle 100%
  • Temperature 100%
  • Sphere 100%
  2 Scopus citations

• Experimental evaluation of wear features of W-25%RE pin tool used in friction stir welding mild steel

  Iqbal, Z., Shuaib, A. R., Al-Badour, F., Merah, N. & Bazoune, A., 2014, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), 38916. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2B).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction Stir Welding 100%
  • Welding 100%
  • Carbon Steel 100%
  • Microstructure 33%
  • Torque 33%
  3 Scopus citations

• Experimental study and numerical modeling of friction stir spot welding of pure copper lap joint

  Mahgoub, A. K., Bazoune, A., Al-Badour, F. A. A., Shuaib, A. & Karrar, G. M., 2014, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), 38033. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2B).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Welds 100%
  • Spot Welding 100%
  • Pure Copper 100%
  • Friction 100%
  • Numerical Modeling 100%
  2 Scopus citations

• Friction stir butt welding of commercially pure copper plates

  Karrar, G., Shuaib, A. N., Al-Badour, F. A., Merah, N. & Mahgoub, A. K., 2014, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction 100%
  • Welding 100%
  • Copper 100%
  • Temperature 33%
  • Finite Element Modeling 33%
  1 Scopus citations

• Gas nitriding of AISI H13 steel extrusion dies: Consideration of sharp features in the die profiles

  Akhtar, S. S., Arif, A. F. M. & Abubakar, A. A., 2014, Proceedings - MONTREAL'2014 AES-ATEMA: 17th AES-ATEMA International Conference on Advances and Trends in Engineering Materials and Their Applications, ATEMA MONTREAL 2014. Haddad, Y. M. (ed.). Advanced Engineering Solutions, p. 77-85 9 p. (AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications; vol. 2014-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Extrusion Dies 100%
  • Nitride Layer 100%
  • Gas Nitriding 100%
  • Steel 100%
  • H13 Tool Steel 100%
  1 Scopus citations

• Introducing CAD/CAM and CNC machining by using a feature based methodology in a manufacturing lab course, a conceptual frame work

  Iqbal, H., Sheikh, A. K. & Abdul Samad, M., 2014, 2014 IEEE Global Engineering Education Conference: Engineering Education Towards Openness and Sustainability, IEEE EDUCON 2014. IEEE Computer Society, p. 811-818 8 p. 6826189. (IEEE Global Engineering Education Conference, EDUCON).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Machining 100%
  • Frame 100%
  • Manufacturing 100%
  • Computer 100%
  • Computer Aided Manufacturing 100%
  4 Scopus citations

• Mechanical behavior of hybrid glass Fibre/Epoxy Clay nanocomposites

  Rafiq, A., Al-Qadhi, M., Merah, N. & Ali, Y., 2014, Advanced Materials Research IV. p. 336-341 6 p. (Advanced Materials Research; vol. 894).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nanoclays 100%
  • Fiber 100%
  • Nanocomposites 100%
  • Hybrid 100%
  • Nanoclay 100%
  14 Scopus citations

• Microstructure and hardness of friction stir weld bead on steel plate using W-25%Re Pin tool

  Iqbal, Z., Shuaib, A. N., Al-Badour, F., Merah, N. & Bazoune, A., 2014, Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Microstructure 100%
  • Steel Plate 100%
  • Welds 100%
  • Friction 100%
  • Alloy 100%
  3 Scopus citations

• Morphology and mechanical property of epoxy-clay nanocomposites prepared by ultrasonication

  Al-Qadhi, M. & Merah, N., 2014, Advances in Applied Materials and Electronics Engineering III. Trans Tech Publications, p. 41-46 6 p. (Advanced Materials Research; vol. 905).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nanocomposites 100%
  • Clay 100%
  • Mechanical Property 100%
  • Morphology 100%
  • Surface 50%

• New approach for the indirect detection of blade-to-stator rubbing in turbo-machinery using wavelet techniques

  Al-Badour, F., Cheded, L. & Sunar, M., 2014, Dynamics, Vibration and Control; Energy; Fluids Engineering; Micro and Nano Manufacturing. American Society of Mechanical Engineers, (ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Traditional Fourier 100%
  • Detection 100%
  • wavelet packet transform 100%
  • Fault Detection 100%
  • Machinery 100%

• Numerical analysis of the performances of bonded composite repair with adhesive band in pipeline API X65

  Meriem-Benziane, M., Abdul-Wahab, S. A., Merah, N. & Babaziane, B., 2014, Material Research and Applications. Trans Tech Publications, p. 1101-1105 5 p. (Advanced Materials Research; vol. 875-877).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Pipeline 100%
  • Composite Repair 100%
  • Numerical Analysis 100%
  • Performance 100%
  • Composite Material 100%
  1 Scopus citations

• Residual stresses in friction stir welded tube-tubesheet joint

  Al-Badour, F. A., Merah, N., Shuaib, A. & Bazoune, A., 2014, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Friction 100%
  • Residual Stress 100%
  • Joints (Structural Components) 100%
  • Temperature 100%
  • Models 50%
  6 Scopus citations
• 2013

  Artificial and natural weathering of chlorinated polyvinyl chloride (CPVC)

  Merah, N., Bazoune, A. & Khan, Z., 2013, Advances in Materials and Materials Processing. p. 1277-1282 6 p. (Advanced Materials Research; vol. 652-654).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Polyvinyl Chloride 100%
  • Weathering 100%
  • Specimen 75%
  • Tensile Test 50%
  • Modulus of Elasticity 25%
  4 Scopus citations

• Compressive behavior of spark plasma sintered CNT reinforced AL2124 and AL6061 nanocomposites

  Saheb, N., 2013, Advances in Materials and Materials Processing. p. 33-37 5 p. (Advanced Materials Research; vol. 652-654).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Compressive Behavior 100%
  • Nanocomposites 100%
  • Powder 100%
  • Mm Diameter 50%
  • Compression Test 50%
  3 Scopus citations

• Effect of high shear mixing parameters and degassing temperature on the morphology of epoxy-clay nanocomposites

  Al-Qadhi, M., Merah, N., Mezghani, K., Khan, Z., Gasem, Z. M. & Sougrat, R., 2013, Advances in Materials and Materials Processing. p. 159-166 8 p. (Advanced Materials Research; vol. 652-654).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nanocomposites 100%
  • Clay 100%
  • Temperature 100%
  • Morphology 100%
  • Degassing 100%
  13 Scopus citations

• Effects of processing techniques on morphology and mechanical properties of epoxy-clay nanocomposites

  Merah, N. & Al-Qadhi, M., 2013, Advances in Materials and Materials Processing. p. 167-174 8 p. (Advanced Materials Research; vol. 652-654).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Processing Technique 100%
  • Mechanical Properties 100%
  • Nanocomposites 100%
  • Clay 100%
  • Morphology 100%
  3 Scopus citations

• Evaluation of filter cake mineralogy in extended reach and maximum reservoir contact wells in sandstone reservoirs

  Bageri, B. S., Al-Majed, A. A., Al-Mutairi, S. H., Ul-Hamid, A. & Al-Sultan, A. S., 2013, Society of Petroleum Engineers - SPE/IADC Drilling Conference and Exhibition 2013. p. 1261-1272 12 p. (SPE/IADC Drilling Conference, Proceedings; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Sandstone 100%
  • Evaluation 100%
  • Filter Cake 100%
  • Fluid 71%
  • Drilling 57%
  30 Scopus citations