Projects per year
- 1 - 50 out of 223 results
Search results
-
Active
2D materials reinforced ABS for additive manufacturing of metamaterials for enhanced biomedical performance
Nazir, A. (PI)
1/05/25 → 1/05/26
Project: Research
-
Renewable Electrolysis of Biomass and CO₂ Valorization into Value-Added Products
Siddiqui, M. N. (PI) & Saleh, T. (CoI)
1/04/25 → 31/03/27
Project: Research
-
Design and Development of Wind Turbine Blades Using Polymer Additive Manufacturing
Seid Ahmed, Y. (PI), Arif, A. F. M. (CoI), Akhtar, S. (CoI) & Abubakar, A. (CoI)
4/03/25 → 31/01/27
Project: Research
-
Optimizing Laser Surface Texturing for Enhanced Industrial Applications: A Path to Sustainable Manufacturing
Seid Ahmed, Y. (PI) & Arif, A. F. M. (CoI)
1/02/25 → 31/01/26
Project: Research
-
Metal Halide Perovskites for Next Generation RRAM based Neuromorphic devices
Harrabi, K. (PI) & Mekki, A. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Hybrid multifunctional and 4D printing strategies for vibration damping in composite space structures
Ghazzawi, S. (PI), Alqasimi, J. (CoI) & Vattathurvalappil, S. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Effect of 3D Printing Process Parameters on the Radiation Shielding Properties and Irradiation Damage of 316L Stainless Steel
Al-Athel, K. (PI), Abdalmuty Al-Abdullah, T. (CoI), Shams, A. (CoI) & Ali, U. (CoI)
1/01/25 → 31/12/26
Project: Research
-
Mitigating anode corrosion and hydrogen evolution in Aluminum-Air batteries
Ngongang Ndjawa, G. O. (PI) & Obot, I. (CoI)
1/01/25 → 31/12/25
Project: Research
-
EcoStrength 300 UHPC: Super Ultra-High-Performance Concrete for 300 MPa Compressive Strength with Recycled C&D and Industrial Waste
Al-Dulaijan, S. (PI), Kalimur Rahman, M. (CoI), Al-Osta, M. (CoI) & Saleh, T. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Fatigue assessment using wearable sensors on construction workers during nighttime
Alshibani, A. (PI), Mazher, K. M. (CoI), Alsuhaibani, A. (CoI) & Ali, U. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Decision support model for BIM uses application in construction projects
Mazher, K. M. (PI), Wuni, I. Y. (CoI), Aziz, M. (CoI), Ali, U. (CoI), Fazle Raziq, M. L. (CoI) & Mohammed, A. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Composite Retrofitting Against Progressive Collapse in Multistory RC Frames
Mukhtar, F. (PI) & Abubakar, A. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Simulation of 3D Concrete Printing
Mukhtar, F. (PI) & Abubakar, A. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Pyrolysis of waste biomass: Kinetics of evolved gases
Abdul Jameel, A. G. (PI), Ali, U. (CoI), Ahmed, U. (CoI) & Sathyamurthy, R. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Evaluating the feasibility of recycled municipal solid waste plastic/ polymer rebar ties for use in reinforced concrete in construction
Mazher, K. M. (PI), Wuni, I. Y. (CoI), Aziz, M. (CoI), Ali, U. (CoI), Fazle Raziq, M. L. (CoI) & Alshibani, A. (CoI)
1/01/25 → 31/12/26
Project: Research
-
Development of smart hydrogel resin/ink for 3D printing of biomaterials with enhanced biocompatibility, functionality and 3D printability
Alam, F. (PI), Alsheghri, A. (CoI) & Vattathurvalappil, S. (CoI)
1/01/25 → 31/12/25
Project: Research
-
Development of new perovskite/spinel materials with high energy storage density and high storage efficiency
Nouari, S. (PI), Hassan, S. F. (CoI) & Qamar, M. (CoI)
1/10/24 → 31/12/25
Project: Research
-
Design, Additive Manufacturing, and Investigation of Advanced lightweight composite/hybrid structures for improved energy absorption
Nazir, A. (PI), Vattathurvalappil, S. (CoI) & Ali, U. (CoI)
1/09/24 → 31/12/25
Project: Research
-
Design, Additive Manufacturing, and Investigation of Advanced lightweight composite/hybrid structures for improved energy absorption
Nazir, A. (PI), Vattathurvalappil, S. (CoI) & Ali, U. (CoI)
1/09/24 → 31/12/25
Project: Research
-
Surface engineering of novel magnesium alloys using plasma electrolytic oxidation
S., S. V. (PI), Sorour, A. (CoI) & Ali, S. (CoI)
1/09/24 → 1/09/27
Project: Research
-
Development of ceramic water filters with anti-bacterial properties.
Merah, N. (PI), Salhi, B. (CoI) & Ankah, N. (CoI)
1/09/24 → 31/12/25
Project: Research
-
Additively manufactured ABS-PEEK fused deposition filament manufacturing
Ali, U. (PI), Vattathurvalappil, S. (CoI), Nazir, A. (CoI), Ummer, A. (CoI) & Madhan kumar, A. (CoI)
1/09/24 → 1/09/27
Project: Research
-
Development of an Advanced Type V Hydrogen Storage Tank: Innovating Safety, Efficiency, and Manufacturability for Next-Generation Sustainable Energy Solutions.
Jaber, M. (PI), Al-Athel, K. (CoI), Albinmousa, J. (CoI) & Sorour, A. (CoI)
1/09/24 → 23/09/25
Project: Research
-
Development of ceramic water filters with anti-bacterial properties
Merah, N. (PI), Salhi, B. (CoI) & Ankah, N. (CoI)
1/09/24 → 31/12/25
Project: Research
-
Development of an Advanced Type V Hydrogen Storage Tank: Innovating Safety, Efficiency, and Manufacturability for Next-Generation Sustainable Energy Solutions.
Jaber, M. (PI), Al-Athel, K. (CoI), Albinmousa, J. (CoI) & Sorour, A. (CoI)
1/09/24 → 31/12/25
Project: Research
-
Additively manufactured ABS-PEEK fused deposition filament manufacturing
Ali, U. (PI), Vattathurvalappil, S. (CoI), Nazir, A. (CoI), Ummer, A. (CoI) & Madhan kumar, A. (CoI)
1/09/24 → 1/09/27
Project: Research
-
Advancing Nonmetallic Biomedical Implants: Reinforcing Strength and Enhancing Biocompatibility with Novel PVD Coatings (Phase I)
Arif, A. F. M. (PI), Abubakar, A. (CoI), Akhtar, S. (CoI), Al-Athel, K. (CoI) & Ahmad, I. (CoI)
1/06/24 → 31/12/25
Project: Research
-
Development of super-super alloy for supreme corrosion and oxidation resistance applications
Hakeem, A. S. (PI), Ogunlakin, N. O. (CoI), Ahmed, B. A. (CoI) & Abubakar, A. (CoI)
4/04/24 → 31/12/25
Project: Research
-
Development of Carbon-Based Material from Petroleum coke for Carbon Capture Applications
Hussein, M. A. (PI), Ibrahim, A. (CoI), Madhan kumar, A. (CoI) & Abdelnaby, M. (CoI)
3/03/24 → 31/12/26
Project: Research
-
Transparent Heat-resistant Thin Film for Energy-saving Building Envelopes
Hossain, M. (PI), Haider, M. (CoI) & Al-Sayoud, A. (CoI)
1/01/24 → 30/06/25
Project: Research
-
Experimental studies on the flow accelerated corrosion behavior of carbon steel in a HTHP flow loop to simulate PWR/BWR reactor conditions
Shams, A. (PI), Al-Sarkhi, A. (CoI), Toor, I.-U.-H. (CoI), Gajbhiye, R. (CoI) & Gasem, Z. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Mechanical and Tribological testing of UHMWPE composites reinforced with a variety of reinforcements for biomedical/industrial applications
Mohammed, A. S. (PI) & Baig, M. M. A. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Development of Smart and 3D-printable Waste-derived Materials for Geotechnical Applications
Aziz, M. (PI), Naqvi, S. U. A. (CoI), Ali, U. (CoI), Khalid, H. R. (CoI), Mazher, K. M. (CoI) & Mustafa, Y. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Development of dust repellent polymeric films for solar panel structures
Madhan kumar, A. (PI), Rahman, M. (CoI), Suleiman, R. (CoI), Hussein, M. A. (CoI) & Al-Ahmed, A. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Laser-induced Engineering of Iron-based Electrodes (Hydroxides, Phosphides, Carbides) for the H2 Production: A Route to Accelerated Fabrication
Qamar, M. (PI), Obot, I. (CoI), Alam, F. (CoI), Sial, M. A. Z. G. (CoI) & Alam, U. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Experimental and computational studies on hydrogen embrittlement of LSAW APIX65 carbon steel and austenitic (304/316) stainless steels
Toor, I.-U.-H. (PI), Sorour, A. (CoI) & Al-Sayoud, A. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Development of Physics-based Computational Framework for Optimization of Metal Additive Manufacturing
Akhtar, S. (PI), Abubakar, A. (CoI), Mekid, S. (CoI), Al-Athel, K. (CoI) & Arif, A. F. M. (CoI)
1/01/24 → 30/06/25
Project: Research
-
Enhancing Biocompatibility and Antibacterial Performance through Cold Spray Metallization of Polymer Surfaces
Abubakar, A. (PI), Sorour, A. (CoI), Arif, A. F. M. (CoI), Ahmad, I. (CoI), Al-Athel, K. (CoI) & Akhtar, S. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Development of Carbon-Based Material from Petroleum coke for Carbon Capture Applications
Hussein, M. A. (PI), Abdelnaby, M. (CoI), Ibrahim, A. (CoI) & Madhan kumar, A. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Advancing Sustainable Strategies for Corrosion Inhibitors in Steel-Concrete Systems
Bahraq, A. (PI), Obot, I. (CoI), Al-Osta, M. (CoI) & Ankah, N. (CoI)
1/01/24 → 31/12/25
Project: Research
-
Development of Hybrid Reversible Adhesives for Dissimilar Material Joining Using Electromagnetic Induction Heating
Vattathurvalappil, S. (PI) & Madhan kumar, A. (CoI)
1/01/23 → 31/12/25
Project: Research
-
Finished
Advancing Directed Energy Deposition Metal Additive Manufacturing through Collaborative Experimental Insights and Physics-Constrained Modeling
Arif, A. F. M. (PI)
23/06/24 → 18/08/24
Project: Research
-
Advancing Nonmetallic Biomedical Implants: Reinforcing Strength and Enhancing Biocompatibility with Novel PVD Coatings (Phase I)
Arif, A. F. M. (PI), Abubakar, A. (CoI), Akhtar, S. (CoI), Al-Athel, K. (CoI) & Ahmad, I. (CoI)
1/06/24 → 31/05/25
Project: Research
-
Design, Additive Manufacturing, and Investigation of Advanced lightweight composite/hybrid structures for improved energy absorption
Nazir, A. (PI), Vattathurvalappil, S. (CoI) & Ali, U. (CoI)
1/01/24 → 31/12/24
Project: Research
-
Advancing Sustainable Strategies for Corrosion Inhibitors in Steel-Concrete Systems
Bahraq, A. (PI), Obot, I. (CoI), Al-Osta, M. (CoI) & Ankah, N. (CoI)
1/01/24 → 31/12/24
Project: Research
-
Investigation of the mechanical properties of cellular/lattice structures designed for additive manufacturing
Nazir, A. (PI) & Ali, H. (CoI)
1/09/23 → 1/09/24
Project: Research
-
Flash sintering of yttria stabilized zirconia-graphene fibers composite
Ahmed, M. (PI)
11/06/23 → 11/08/23
Project: Research
-
P-Bits Using Stochastic Magnetic Tunnel Junctions for Probabilistic Acquisition and Processing of Big Data [Phase I]
Al-Dirini, F. (PI) & Bunaiyan, S. (CoI)
2/04/23 → 31/12/24
Project: Research
-
Development of antibacterial and biocompatible hybrid polymeric coatings and drug-loaded Ti nanotubes on a new titanium alloy for bio implant applications
Madhan kumar, A. (PI), Hussein, M. A. (CoI) & Ogunlakin, N. O. (CoI)
1/04/23 → 1/04/25
Project: Research
-
Investigate the Effect of High Energy Ball Milling and Catalysts Addition on Magnesium Alloy for Hydrogen-Based Energy Storage Applications.
Hussein, M. A. (PI), Abdelnaby, M. (CoI) & Abdul Azeem, M. (CoI)
1/04/23 → 1/04/25
Project: Research